Welcome to Our Community

Unlock hidden features. Sign Up for Free Today!

Small C-beam build - XL style

Discussion in 'CNC Mills/Routers' started by DanW, May 11, 2017.

  1. DanW

    DanW Well-Known
    Builder

    Joined:
    Mar 1, 2017
    Messages:
    10
    Likes Received:
    1
    Hi,
    I have a few newbie questions.
    I need a cnc for PCB milling and acrylic. I was going to build XL version, but because this is my first build I prefer cheaper. Also, I don't need much working area for PCBs, I need resolution. For acrylic I have max sizes 600mm x 150mm - will I be able to move longer materials around?
    Everybody say they'd build the small c-beam just like newer XL version, but smaller. Are there any examples? I don't really want to design it myself just in the beginning of my cnc's journey.
    Is there anybody building in UK. Where do you buy the parts? ooznest only? I've done the bom, but they dont have everything - some parts are cheaper in China but i don't know the quality.


    Regards,
    Daniel
     
  2. Ryan Lock

    Ryan Lock Master
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    269
    Likes Received:
    105
    Hi,

    Do you need to mill the full 600mm length? If so you will need the XL to fit this on. If you don't you could do this on the small C-Beam, and just have it over hanging, so yes you can move larger bits around than the work area.

    I am afraid i don't have a BOM for a small XL, however i think i could quickly come up with one if you wanted a price.

    Ryan
     
  3. DanW

    DanW Well-Known
    Builder

    Joined:
    Mar 1, 2017
    Messages:
    10
    Likes Received:
    1
    Thanks for the answer. Yes, I'd like the price please. Would XL be too big/ not accurate for small pieces like pcbs? I was also wondering if I could use my Bosch pof 1400 router. It looks a bit bulky though. I'm planning on using also dremel where low RPM are needed.
    thx
    Daniel
     
  4. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder

    Joined:
    Dec 20, 2013
    Messages:
    1,292
    Likes Received:
    519
    Ryan, you might even give some consideration to updating your C-Beam offering to the new XL style. No sense continuing to sell an outdated design when the new XL plates will make a good machine even better.
     
  5. Map

    Map New
    Builder

    Joined:
    May 12, 2017
    Messages:
    3
    Likes Received:
    0
    I would like a BOM for a smaller C-Beam XL, say around 500mm instead of the 1000mm.

    I'm am new to the CNC world and was also looking at the C-Beam XL as opposed to the C-Beam because I read that the XL has a more rigid construction and a new construction than the strait C-Beam. I want to make PCBs and small gear's for my robotics hobby and do not need, at this time, a base for large woodworking projects.

    Another issue I have has to do with the spindle clamp. I most likely should put this in another thread but with that said:

    I would like a 300w or 400w spindle but I am uncertain how I would mount it or where to get the clamps. I did come across the smw3d.com site and they has a 400w spindle with a clamp but they say its designed for the OX build. It seems like the clamp would this work for a C-Beam but I am unsure. Would the smw3d clamp and spindle work? Where can I source a spindle and clamps for the C-Beam?

    Clamp (SMW3D spindle clamps)

    Thank you for reading this so-far.
     
  6. Grantman

    Grantman Well-Known
    Builder

    Joined:
    Apr 10, 2017
    Messages:
    23
    Likes Received:
    8
    Wouldn't the BOM be identical save the rail lengths?
     
  7. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder

    Joined:
    Dec 20, 2013
    Messages:
    1,292
    Likes Received:
    519
    No, there are 2 Y-axis rails. But if you take the XL BOM and subtract the 1000mm cbeam and screw with its end plates, bearings, collars, washers, and coupler and one of the Y-axis gantry plate assemblies you should be pretty close.
     
    Map and DanW like this.
  8. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder

    Joined:
    Dec 20, 2013
    Messages:
    1,292
    Likes Received:
    519
    Yes, but as it is designed for a 60mm width it will set slightly off center on the 80mm width of the C-beam Z axis. Cutting area will just reach 20mm closer to one side than the other which is not a big deal.
     
  9. Ryan Lock

    Ryan Lock Master
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    269
    Likes Received:
    105
    I will work out the BOM, and come up with a price and send it over. I may offer it, only issue Openbuilds don't offer a small C-Beam bundle with the XL plates either, and we get our C-Beam machines from them.

    The XL Would be accurate enough, but is a big machine.
     
  10. DanW

    DanW Well-Known
    Builder

    Joined:
    Mar 1, 2017
    Messages:
    10
    Likes Received:
    1
    Thats great. I Look forward to it! I don't understand why a gantry plate is an issue. I can see you offer those plates.
     
  11. Rick 2.0

    Rick 2.0 OpenBuilds Team
    Staff Member Moderator Builder

    Joined:
    Dec 20, 2013
    Messages:
    1,292
    Likes Received:
    519
    Based on what Ryan is saying, it has to do with breaking up prepackaged kits. There's a lot more difference than just a gantry plate. Wheels are different, there's more/different plates, bolts, shims, washers, etc,. (I just didn't realize as can be seen with my questions above that he gets them already prepackaged.)
     
  12. Map

    Map New
    Builder

    Joined:
    May 12, 2017
    Messages:
    3
    Likes Received:
    0
    Thanks for the evaluation! As you said I'm not too worried about the "20mm closer to one side" issue.
     
  13. Map

    Map New
    Builder

    Joined:
    May 12, 2017
    Messages:
    3
    Likes Received:
    0
    This would be great. I look forward to it and thanks for your work.

    You said the "The XL Would be accurate enough" for PCB's. Then I will seriously consider it but I still would like a smaller machine as I would have less of a hassle to make room for it in my already crowded space.
     
  14. Ryan Lock

    Ryan Lock Master
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    269
    Likes Received:
    105
    Hi,

    I have attached the BOM for a C-Beam XL Small. I believe it to be correct, but i couldn't say 100% until i built one. We do get them in bundles from Openbuilds, but also re-package them ourselves to make sure everything is there, and put part labels on everything. With the XL we also cut, square and tap all the extrusions, and file the cast corners where needed, should save you a good chunk of time.

    For the Small XL it would be £630 Inc VAT. This would be without the motors and shipping.

    Ryan
     

    Attached Files:

    Paul Stoller likes this.
  15. DanW

    DanW Well-Known
    Builder

    Joined:
    Mar 1, 2017
    Messages:
    10
    Likes Received:
    1
    That's great! Thank you. How long would it take to ship it? Anyone tried using Bosch 1400 pot router? I Wouldn't want to buy a new router if I don't have to.
     
  16. Ryan Lock

    Ryan Lock Master
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    269
    Likes Received:
    105
    Hi,

    3-5days it should be.

    Ryan
     
  17. DanW

    DanW Well-Known
    Builder

    Joined:
    Mar 1, 2017
    Messages:
    10
    Likes Received:
    1
    Thank you. Could you also help me with controller board and motors?Nema 23 175 torque? Would dewalt mount work with Makita RT0701C? Dewalt or Makita? Or I can use my Bosch?

    thank you
     
  18. Ryan Lock

    Ryan Lock Master
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    269
    Likes Received:
    105
    We sell the xPro controller which is widely used on here. Them size motors would be ok for this size machine. The Makita is a smaller router than the Dewalt and Bosch, but we do have adaptors for it,
     
  19. DanW

    DanW Well-Known
    Builder

    Joined:
    Mar 1, 2017
    Messages:
    10
    Likes Received:
    1
    I think I'll take 265 oz. Can I have a link to that adapter please?
     
  20. DanW

    DanW Well-Known
    Builder

    Joined:
    Mar 1, 2017
    Messages:
    10
    Likes Received:
    1
    Small XL kit
    Nema 23 265.oz
    Makita RT0700cx4
    XPro CNC v3 (I've never really liked Arduino but I dont see anything more suitable. I like the fact that I can use Xbee - Raspberry Pi.) If anyone would suggest a different board I'll have a look.
    Power supply 24V 350W
    Adaptor for makita?
    Is this all I need? Any fans, cables etc?
     
  21. Ryan Lock

    Ryan Lock Master
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    269
    Likes Received:
    105
    Hi Dan,

    That is pretty much it, you would need an adapter Makita but we have loads 3D Printed :)

    Ryan
     
  22. DanW

    DanW Well-Known
    Builder

    Joined:
    Mar 1, 2017
    Messages:
    10
    Likes Received:
    1
    This is it. I bought the kit. I'll be building it next weekend hopefully. I'll document and post the build here, so if anyone's interested - keep your fingers crossed.
    Thanks for help!
     
    Ryan Lock likes this.
  23. Ryan Lock

    Ryan Lock Master
    Builder

    Joined:
    Oct 12, 2014
    Messages:
    269
    Likes Received:
    105
    Thanks Dan! Will be great to see one built :)
     

Share This Page

  • About Us

    The OpenBuilds Team is dedicated helping you to Dream it - Build it - Share it! Collaborate on our forums and be sure to visit the Part Store for all your Building needs!
  • Like us on Facebook

  • Support Open Source FairShare Program!

    OpenBuilds FairShare Give Back Program provide resources to Open Source projects, developers and schools around the world. Invest in your future by helping others develop theirs!

    Donate to FairShare!