Welcome to Our Community

Some features disabled for guests. Register Today.

      1. Build Progress:
        • Build in Progress...
      Rate This Build
      0/5,
      0 votes
      This is my first build. The goal is to have a relatively strong CNC to be able to cut alu.
      As I don't own a workshop and sophisticated tools, I try to use very few custom parts.
      I want find a compromise between a strong and a cheap machine.
      Working space will be around 800x350x100mm.
      For x and z-axis I will use the metal v wheels that roll on a square steel profile (see pictures below).
      For the y-axis I use Igus linear guides (super strong, two rails and four carriges will be around 250$).
      All axis with lead screws an two anti backlash nuts.
      I didn't think about spindle and electronics so far. render2.JPG render3.JPG
      Here is a close-up of the square steel profile and the c-beam. I will glue the steel piece onto the c-beam.
      profilquadstahl.PNG

      Update 05.09.17:
      Today I got some Openbuild parts and I bought some cheap 6mm by 6mm square steel at the home improvement store. I made a small test assembly to see how it works: 20170831_164221.jpg 20170831_170027.jpg

      it wasn't even necessary to fix the square rod as it is held in place tightly by the preloaded wheels.
      For this test setup I used only four wheels (two on each side) and it already feels quite solid and the gantry runs smoothly. So the first test is a success. I ordered some better quality (stainless) rods for about 8$ each. With these it should even work better.
      I don't have any plastic wheels so I can't compare with the regular setup (plastic wheels rolling in the groove of the beam).

      I planned to glue the square rod onto the c-beam, but now i think this is not even necessary as the rod fit very well and is locked in place.


      Now, as i pushed and pulled on the test assembly to get a feel for its rigidity i became unsure if it's really going to be rigid enough for decent aluminum milling. So might have to use more wheels...
      More wheels mean more money. The metal v wheel assembly is close to 10$ each. So that will be around 100$ for the x-axis (8 wheels + rods).

      I remembered some Igus linear glide bearings being very cheap (and probably more rigid than the wheel setup). So i gave them a shot and made an all glide bearing version of my build:

      alligus.JPG alligus2.JPG

      This setup will also be around 100$ for the x-axis.

      Now, please leave your thoughts in the discussion section. Should I use the wheels or the glides? Thanks!
  • Loading...
  • Build Details

    Build License:
    • CC - Attribution - CC BY

    Inspired by

    Ox, Sphinx
  • About Us

    The OpenBuilds Team is dedicated helping you to Dream it - Build it - Share it! Collaborate on our forums and be sure to visit the Part Store for all your Maker needs.


    Support@OpenBuilds.com

  • Like us on Facebook

  • Support Open Source FairShare Program!

    OpenBuilds FairShare Give Back Program provides resources to Open Source projects, developers and schools around the world. Invest in your future by helping others develop their future.

    Donate to Open Source