Current Status: Working out a couple kinks on the endstops
- Develop proper body parts to hold the corners, currently using 90 degree brackets.
- Expand the printer, currently not utilizing all of the default print bed.
- Possibly add an extrusion (currently using the AirTripper)
Began in July 2017, CAD done using Autodesk Fusion 360. Going to upload the STLs here and the list of build materials. Tried to source everything I can through openbuilds for consistency, a few self printed parts and remnants from the Mendelmax used where applicable.
This build began back from the Mendelmax 1.5 printer I had been using for a couple years now. Moving the entire print bed for the Y-axis was so much mass that it caused vibrations in my prints, which spurred me to trying to CAD my own cartesian printer.
Additionally, I had already started slowly replacing the smooth rods commonly used on the Mendel design for the X/Y Axes into Openbuilds extrusion, and found quicker/lighter movement, and a lower noise volume compared to the linear bearings rattling (I live in a studio).
Not doing any fancy core-xy here (maybe convert this in the future to it, not sure), but have found this to so far resolve my problems.
The extrusion cuts may not be ideal for most, was trying to reuse all of the extrusions I had from the Mendelmax and a few leftover from another side project, so feel free to tweak those numbers.
Skyggen 3D Printer
GT2 belt-driven Cartesian 3D Printer on an OpenBuilds Extrusion gantry, developed through Autodesk Fusion 360.
- Build License:
- CC - Attribution NonCommercial - CC BY NC
Reason for this BuildI kept trying to cut weight on the bed for the Mendelmax design so I could run it faster, and eventually gave up for this gantry-style which I find to be a much lighter operation. I feel the stationary bed improves layer adhesion.
Inspired byUbermeisters inspired me a lot to build this, he mentored me for a long time and I always wanted to rise to his level.
Qty Part Name Part Link Comments 2 20x20 V-Slot Linear Rail, 420mm (Y Axis) http://openbuildspartstore.com/v-slot-linear-rail/ Link Cut to 420mm, and pay for the anodized black because it's that cool. 1 20x20 V-Slot Linear Rail, 450mm (X Axis) http://openbuildspartstore.com/v-slot-linear-rail/ Link Cut to 450mm, and pay for the anodized black because it's that cool. 4 20x20 V-Slot Linear Rail, 290mm (Chassis) http://openbuildspartstore.com/v-slot-linear-rail/ Link Cut to 290mm, I know that's a weird dimension, leftover extrusion I had at the time. 6 20x20 V-Slot Linear Rail, 300mm (Chassis/ Z Axis) http://openbuildspartstore.com/v-slot-linear-rail/ Link Cut to 300mm 2 20x20 V-Slot Linear Rail, 340mm (Chassis) http://openbuildspartstore.com/v-slot-linear-rail/ Link Cut to 340mm 3 Mini V Gantry from Openbuilds http://openbuildspartstore.com/mini-v-gantry-set/ Link 1 is used for X-Axis, 2 are used for Y-Axis 2 20mm V-Slot Gantry Set from Openbuilds http://openbuildspartstore.com/v-slot-gantry-set/ Link 2 for the Z-Axis, feel free to substitute Mini V Gantry here if you'd like.