Select a Category
Build Author changedsoul Views 683
First CoreXY Build
First CoreXY. Simple Square build, hopes for faster movements.
Build Author Roberts Kristins Views 1134
Core XY My-BOT 500 x 500 x 1000
My first construction after many years buys ready devices.
Build Author Shortyski13 Views 3840
A Large CoreXY build that can just barely get in through a doorway, aiming for under $1000. Build Volume approximately 18in x 24in x 26in.
Build Author Max Tepermeister Views 12621
A dual extrusion CoreXY printer with a 290 X 290mm build volume built entirely out of 2020 aluminum extrusion and using openbuilds mini-carriages for motion.
Build Author Giuliano M Views 31061
H-Bot CoreXY Cube
Build Author Giuliano M Views 4191
CoreXY cube with 600x600x800 volume.
Build Author evolver56k Views 1847
The Artist Formerly Known as Prints
Work in progress large volume CoreXY printer
Build Author Matt Barile Views 1895
Fixed Gantry Welded Steel Router
Fully welded, fixed gantry CNC router, with chinese linear motion parts, in progress
Build Author Eric Kiser Views 4499
Live D-bot build at MRRF 2017 (Mar 25-26)
I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.
Build Author Dmknerr Views 1477
Server Rack Printer
My first project build. Concept build to use an existing 7.5 ft tall server rack as the frame. This ptoject may never be completed.
Build Author Mike Hake Views 1248
Epoxy dispenser, to apply non-conductive epoxy to electronic board.
Epoxy dispenser, 2nd one, first one works great. Uses HMI to allow for operator to pull up files for different jobs. 9 prox sensors, Eot and home on all 3 axis. High quality nema23 motors with intergrated drives from applied motion. Uses programmable router for drives.
Build Author techmod Views 4095
This is going to be a more or less detailed how to build BetterBot. Pictures and more (decent) text are to be added.
Build Author BeTrue3D Views 7706
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
Build Author Tom West Views 4628
Hlidskjalf, CoreXYU (dual X-carriage)
Dual X-Carriage CoreXY. Not impossible, but probably the only one. Use the link to Thingiverse "Hlidskjalf" for parts and downloads.
Build Author Power Playground Views 1774
This is my own modified version of the D-Bot printer. I wanted to spec this printer to be able to print exotic materials at high accuracy with little to no compromises and maximum reliability.
Build Author Aleksandar Views 6265
Currently I have Velleman/3Drag K8200 modified and CNC machine self built and wanted to use both to make new 3D printer. After looking at different designs I liked Voron a lot and have decided to go that way. Currently I have ordered majority of parts and build shall start soon. I don't plan to rush it as I am usually 2 months home and 2 off.
Build Author MikeBardsley Views 4607
Fast, Large build area, CoreXY design
Build Author uran Views 5459
TesseractXY (MendelMax 1.5 version)
History about making 3d printer.
Build Author sergeysapiro78 Views 2165
Zen3D Atlantis 3D printer, H-Bot mechanics
H-Bot mechanics 3D printer. Build volume - 300x300x300mm dimensions: 560x500x500mm
Build Author Bon Thomassen Views 7269
D-Bot CoreXY printer
A CoreXY D-Bot 3d printer using gantries as wheel-carriages.
Build Author Lindsey Lewis Views 3971
CORE XY 3D Printer
This is an inexpensive build, large volume 2225 cubic inch, CORE XY 3D printer providing decent speed with precise and repeatable precision with expandable features.
Build Author Carl Feniak Views 176574
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
Build Author alan richard Views 10068
An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'
Build Author Adam Filipowicz Views 23071
TITAN-XY (Fixed Build Plate, Quad Z Screw, CoreXY)
Super Rigid CoreXY 3D Printer
Build Author runninfarmer Views 20322
Build Author JOSH.PIERCE Views 17766
CoreXY W/ Fixed Build Plate & Enclosure
Building a Core XY printer with a fixed build plate from off the shelf parts.
Build Author Nwrgordon Views 8661
An easy Epic Win for novice engineers new to the RepRap project www.3distributed.com
Build Author Sjors Views 4995
Laser cutter project by students
This build is made by students from Fontys Hogescholen Eindhoven, department Engineering. Every quarter a new group continues the work of the previous group. We have been working on the project since september 2015, and as it is a work in progress, a lot will be added later. The first months have mainly been about designing and building an XY-table on which later all the electronic components will be added and the laser.
Build Author Keith Davis Views 12623
Combines the layout factor of a CoreXY while using Cartesian logic. The design has a fixed build plate - moving an X/Y frame on the Z axis enclosed by an outer main frame.
Build Author Mash172 Views 4756
XYZ Factory Bot
Very large format build platform designed really for printing multiple items in one session ether all the same or different. Longer term I would like to have multiple X axis on the Y axis rail. bit of a slicer challenge though.
Build Author Jesse Jenkins Views 6454
Hedron's build with Ooznest kit and Xylotex motors
A 3-axis flying gantry (4'x4') mechanical kit is assembled. A 3D printer is used to make cable chain for tidy and cheap wire management. A BeagleBone Black development platform with Machinekit software (LinuxCNC) is configured to control a Xylotex motor driver box connected to an Openbuilds Ox direct-drive pulley and belt motion system. A vacuum dust-collection system is designed, CNC-routed and installed. A steel table is made to mount the table onto.
Build Author JCPhlux Views 8859
Large Core XY 3d Printer W/fixed build plate
Build Author Filipe Jose Views 13600
The name of the printer is G&C Printer from Good & Cheap Printer. My goal was to design an printer that was good print quality and was cheap. The total cost of the printer is about 490€.
Build Author michel pet Views 4686
core xy smoothie
i had som left over parts and i dit like to test the corexy control so this is wat i came up with. sorry bad englich.
Build Author Keith Davis Views 7674
A CoreXY/Bowden design with a belt driven Z axis. This is a box design without the front end of the box, making the print area and maintenance, like changing a nozzle, easily accessible.
Build Author Mark Carew Views 44229
X Y Table OpenRail / V-Slot Build Examples
The X/Y table system is a great starting point for many CNC projects giving you the ability to move an object on the X and Y axis in a simple compact style.
Build Author Mark Carew Views 34569
V-Slot™ X -Y Stage Hidden Acme Rod Example
An X-Y Stage created from two self contained acme screw linear actuators. This build was published as an example of how many of the OpenBuilds Parts can be used.
Build Author adamcooks Views 31110
Based on the work of Carl Feniak and his C-Bot. A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy. Utilizing a 300x300 build plate this derivation utilizes three lead screws, synced to a single motor via gt2 belt
Build Author Eric Foster Views 4516
CoreXY Table with Symmetric Lead Screw Z axis, Build volume: 293mm x 290.75mm x 223.83mm
Build Author ymilord Views 7865
Small Portable PCB CNC Machine (CoreXY)
This is a small CNC mill/router specifically for manufacture PCBs. This is based on the corexy gantry setup. The plan is to have a small, light self-contained machine that can be used and easily but away when it's job is done.
Build Author Anglesachse Views 5452
Corexy, with possible head change (3d, cnc, laser)
Build Author TomH Views 10453
H-Bot CoreXY Cube with Fixed Build Plate
Use of V-Slot for frame and rails with option to use identical 500mm uncut lengths: 8 * 20x60 x 500mm 8 * 20x40 x 500mm 7 * 20x20 x 500mm (2 cut into four identical 125mm pieces for filament holders) Use of uncut 500mm rails obtained through use of 12 joining plates for use as spacers. Alternate approach is to trim two 20x40 and 1 20x20 rail by 6-8mm each. Build volume ~400mm cubed (with dual extruders). Use of only openbuilds components! Currently in design phase...
Build Author runninfarmer Views 8133
Build Author M^3 Views 13564
M Cubed CNC Mill
A no-nonsense CNC mini mill to get the job done.
Build Author Keith Davis Views 20201
A compact, enclosed Core XY design, based on off-the-shelf parts.
Build Author Imko van Beckhoven Views 14914
OKMI 3d Printer
OKMI 3d Printer based on CoreXY
Build Author sausagePaws Views 35080
Embroidery machine with XY belt and pinion drive.
A simple Embroidery machine using an XY belt and pinion drive to drive a hoop under a standard sewing machine. Needle timing, machine power and stepper control are all provided by a PIC processor. A tablet provides the higher level formatting required for communicating with the PIC chip.