Select a Category
Build Author Bradles Views 875
Linear Rail derivative with ball screw
basic start to design of cnc machine
Build Author Savvas Views 757
Halloumi CNC Machine - Acetal Plates
I built the original machine using plywood plates, and always intended to upgrade those parts to more durable ones. I decided to go with acetal as it's a lot easier to cut than aluminium. I used fusion 360 to model and rebuild the original machine. Once I have assembled everything and feel confident it all works I will release the plate designs here.
Build Author Mark Carew Views 59665
V-Slot™ Nema 17 Lead Screw / ACME Driven Actuators
Example model of lead screw driven actuators for your next project!
Build Author evgeny156 Views 2480
3D Printer on Prusa architecture with best parts available
Wanna quet an nice looking device done by my hands
Build Author Marshall Peck Views 48509
Voxel OX - Extendable 3D Printer and CNC Platform
An open source 3D printer design with a sturdy V-Slot frame
Build Author Limine3D Views 4302
A cartesian build with a build dimension of 200x200x750mm. I will be using a dual extruder, heated build plate, and a screw drive for the z axis.
Build Author mikev Views 4787
C-Beam Evolution MkII
The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.
Build Author Giarc Views 21511
Lead Screw Driven Ox Derivative (850x1500)
Another build based on the original OX design with a cutting area will be about 26" (680mm) x 50" (1300mm) and driven by lead screws.
Build Author recoush Views 2167
CoreXY 3D build one
an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool
Build Author LarsTveito Views 3833
Ox Stainless with ballscrews
Ox Stainless with ballscrews for motion, nema 23 steppers, LInuxcnc for control software. Using basic parts for frame from Makersupplies, and the rest sourced from ebay. Building a small router hoping it will be able to cut aluminum with decent results.
Build Author noursbricoleur Views 8597
in construction ! chassis vslot 80x20 & 20x20 & 60x80 (Z) home made plates with whells polycarbonate build volume environ, 750x300x200 2 ed3d v6 volcano nozzles 0.8mm & 0.6 + titan extrudeurs rumba bord + auto levelling ip camera home made heat bed aluminium 5mm + glass + heat air chamber 6 doors plexiglass......
Build Author BeTrue3D Views 7711
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
Build Author kylesmth Views 1918
Lead screw printer
High quality e3d parts with a minimalist design
Build Author sgspenceley Views 2255
LinearRail - 3D Printer
I have re-purposed many of the parts from my Linear OX build. I'm using MGN 12 linear rails on all three axis, 5 start lead screws on the Z axis and I'm going to experiment with 5 start lead screw on the X axis. The frame plates are made from 1/8" laser cut mild steel, & open builds extrusion.
Build Author Simon Rafferty Views 3255
A Rigid Delta Printer using C-Beam screw actuators
Build Author Julius Views 11865
OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative
1000x1000mm Ballscrew driven OX Derivative. Dewalt 611 spindle and TB6600 Drivers.
Build Author evil2002usna Views 5095
Cheap Ballscrew Ox CNC Router.
Build Author Colin Russon Views 4124
OX / X3 CNC / Similar Z axis / 1605 Linear Actuator
Z axes 1605 ballscrew, a comparative design proposal.
Build Author Jason Kraft Views 3576
The MULE (an OX inspired 3-axis CNC)
The Mule is a 3-axis CNC inspired by the OX CNC by Mark Carew. This machine borrows the OX's sturdy frame and upgrades the X and Y linear actuators through the use of three 500mm lead screws (as opposed to the belt system of the OX). The result is an inexpensive, sturdy, and powerful design built for cutting tough materials such as aluminum.
Build Author Steve B Views 11073
OX PPR - Portable Plasma/Router
PPR = Portable Plasma/Router. A ~30x30"work area with leadscrews. Work surface is below support members. Can be placed ONTO cutting surface.
Build Author laurie Views 6088
Delta 3D Printer
This is a Delta build using 1610 ballscrews from China
Build Author adamcooks Views 31116
Based on the work of Carl Feniak and his C-Bot. A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy. Utilizing a 300x300 build plate this derivation utilizes three lead screws, synced to a single motor via gt2 belt
Build Author Kyo Views 6973
This is Fina; My Lautr3k inspired build.
Build Author sgspenceley Views 56468
Linear Rail CNC Machines
A CNC build using linear rails & lead screws.
Build Author M^3 Views 13566
M Cubed CNC Mill
A no-nonsense CNC mini mill to get the job done.
Build Author Jason Farley Views 5767
Hybrid OX (Ball Screw, Linear Guides, Ect.)
Planning my first build. Hope to achieve a larger format yet rigid design.
Build Author Philippe Bergeron Views 6394
My first 3D printer: Absolute3Dr
You are about to read the evolution of my 3d Printer build.
Build Author vogtmrk Views 5889
OX 1500x1500 Dual Drive
Ox inspired 1500 x 1500 CNC with belt and pinion drive and lead screw drive options.
Build Author asb_79 Views 6888
Versabot - All metal 3D printer
An all metal construction cartesian style 3D printer with a very rigid frame that has the flexibility to function as a desktop milling station or laser cutter with appropriate user designed attachments. Design is scaleable to suit any size requirement. All axis are leadscrew driven. V-Slot and Mini V-wheels have been utilised for the linear rails.