Select a Category
Build Author Fabio Orsi Views 1765
147 RepStrap 002
This project is focused on developing a low-cost, portable and open-source FDM 3D Printer.
Build Author recoush Views 2166
CoreXY 3D build one
an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool
Build Author schwabelectronics Views 2829
Vertical Drill Mill
Mill drill using a dremel and some 3d printed parts
Build Author MikeBardsley Views 4607
Fast, Large build area, CoreXY design
Build Author mrtinkerer Views 10605
V-slot and MDF DeltaBot
This is a deltabot 3D printer build using CNC routed MDF and v-slot rails. Full description found in instructables.com.
Build Author Keteland Views 6157
MULIMATERIAL 3D PRINTER (in progress)
ELECTRONICS - ARDUINO Mega 2560 + RAMPS 1.4 + power supply 12V - Leadshine DM 5042 external driver + Power supply 36V + NEMA 23 stepper motor SOFTWARE - Repetier Host to communicate with the Ramps - ARDUINO to upload the firmware (Marlin) MECANIC - V-Slots rails 40x40 + home-made plates - everything goes fine on the side of the build
Build Author nicklogan Views 10520
A Rostock style delta bot with the parts which are typically 3D printed made from medium density fiberboard (MDF). It uses a home made hot end.
Build Author Gamekiller77 Views 1832
Atlas Delta Bot
The idea here is to build a nice large delta bot from the parts ground on the one builds part store. Other parts that are sources out side of this will be detailed. I have a simple BOM I started that I will upload later.
Build Author Sam Dobbie Views 3969
A fully aluminium printer made from off the shelf components, no printed parts.
Build Author Sheepdog Views 18995
Griffin Delta Printer
Designed from the ground up as a low cost, highly scalable delta printer. This printer has been built as small as carry on luggage size, up to an 18in wide print surface and is capable of larger. Approximate cost is low to mid $500 range start to finish, including electronics for a basic model.