Select a Category
Build Author Martin.Barfoed Views 44807
Large format 1200X1500mm OX Build using Stainless Steel plates, dual belt configuration. Limit switches is a mix of micro switches and NPN Proximity switches. Electronics based on parallel break out board, Long Motor Stepper drivers (Chinese stuff) and motors controlled by Mach3. Spindel will be Kress 1050.
Build Author Savvas Views 3673
CNC Control Box with VFD etc etc
I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.
Build Author Chefson Views 4261
OX CNC Router
Ca fait 2 ans que je rêve d'une Fraiseuse CNC. Ni trop grande ni trop petite, sans avoir le budget pour en acheter une toute faite. Je suis artisan menuisier ébéniste et j'ai finalement décidé de la construire. Le projet OX m'a séduit, alors je me lance.
Build Author Giarc Views 17881
Lead Screw Driven Ox Derivative (850x1500)
Another build based on the original OX design with a cutting area will be about 26" (680mm) x 50" (1300mm) and driven by lead screws.
Build Author Gary Caruso Views 9328
OX Heavy Duty Build
OX Heavy Duty, using Chrisclub plates, for 2080 X-Y and C-beam Z
Build Author McAdam Views 1145
Need a catchy name - enlarging CNC
The aim of this build is to have a CNC that can cut a FULL sheet of wood when I need it to, but also shrink down and cut smaller sheets the rest of the time. The prototype is based on an OX cnc but soon it will be completely custom using Openbuilds Parts
Build Author Matt Barile Views 1293
Fixed Gantry Welded Steel Router
Fully welded, fixed gantry CNC router, with chinese linear motion parts, in progress
Build Author Garrettcompston Views 1848
My 2nd cnc build
My new build to upgrade from my worn out shapeoko
Build Author Anthony Bolgar Views 6038
L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes
This build is for a testing rig to use while testing out different controller boards and CAM software for milling and routing. It is in the early stages, planning is complete, parts are ordered. Awaiting parts delivery to start build. Please not the BOM only covers parts from the OpenBuilds part store. I will be posting the other required items very shortly.
Build Author LarsTveito Views 2974
Ox Stainless with ballscrews
Ox Stainless with ballscrews for motion, nema 23 steppers, LInuxcnc for control software. Using basic parts for frame from Makersupplies, and the rest sourced from ebay. Building a small router hoping it will be able to cut aluminum with decent results.
Build Author seedorff Views 2134
This is my OX. There are many like it, but this one is mine. My OX is my best friend. It is my life. I must master it as I must master my life.....
Build Author Mike Hake Views 945
Epoxy dispenser, to apply non-conductive epoxy to electronic board.
Epoxy dispenser, 2nd one, first one works great. Uses HMI to allow for operator to pull up files for different jobs. 9 prox sensors, Eot and home on all 3 axis. High quality nema23 motors with intergrated drives from applied motion. Uses programmable router for drives.
Build Author seedorff Views 925
A simple made hideaway for ugly electronics
Build Author Metalguru Views 6715
Big Ox Heavy Duty
A Heavy Duty version of the standard Big Ox build.
Build Author Michael Forte Views 809
OX CNC Build
OX CNC built using the kit from SMW3D with a Smoothieboard 5 and external motor drivers.
Build Author IndyMaker Views 4062
Ooznest Ox with 3D Printed Gantry Plates
Ooznest Ox with gantry plates and end caps 3D printed in ABS rather than aluminum.
Build Author DazTheGas Views 12921
From where Mark left off from the Ox build I am going to film the whole process of customizing the Ox.
Build Author Hackscribble Views 15296
1000mm x 750mm OX with some planned enhancements. My first venture into CNC.
Build Author Hytech2k Views 56177
Area 51 CNC Parts F-117 CNC Gear Rack Drive System
This is my journey on building a rack and pinion Ox variant called the F-117 CNC.
Build Author ANDRESCAMPA Views 1603
SUPER OX NEMA 34 1600 OZ Motors!!!
CNC OX 1500X3000
Build Author Jonathon Harms Views 1352
Schematix Ox-Metal Build
A build of Schematix's Ox-Metal design, with a 0.8kw watercooled spindle.
Build Author peter28 Views 1569
i wanted to use both the ox and the C beam C beam for the gantry because its stronger i also made the gantry 20 mm higher so i can cut thinker material i will maybe later go to rack& pinion on the 1500 mm Y axes also instead of the V wheels i will maybe go to hiwin in the furture
Build Author Martin Skov Nielsen Views 2492
Stainless OX kit
This is a 1500 X 1500 Stainless OX kit build, by a cnc novice. It is the first cnc machine i have ovned and build I got this kit from http://makersupplies.dk/20-ox-cnc-kits
Build Author James Hayes Views 2450
Pure Cbeam 900x1000
This is a pure cbeam build to maximize envelope and rigidity. All the parts used are available from open builds.
Build Author Schematix Views 54783
OX-Metal CNC Router Mill
The OX-Metal is based on the original OX CNC mill But with a few modifications and add-ons
Build Author Edgar Robles Views 1266
Sheethexapod works with basic mechanims as direct metal-metal links and joints, all movements can be done by a rc servomotor in this case towerpro model.
Build Author Jen Views 3820
My first OX build
This is the story of my experience building a 1000 x 750mm OOZNest OX CNC router
Build Author Silverrabbit2 Views 3440
Ooznest OX, Workbench, & Folding Table
An OX based unit with innovation surrounding it -- 9 drawers, workbench, folding CNC table, & portability.
Build Author anigeek65 Views 11128
OX Super "C" - Cpmpleted 11/02/16
This CNC utilizes the C-BEAM extruded aluminum for the "X", "Y", and "Z" axis. The gantry will move similar to the OX along with the "Z" except I am incorporating the C-BEAM instead of the 20x60 V-RAIL. To make the system as strong as possible I am using two C-BEAM rails back to back. The "Y" axis will encompass two sets of roller on both side of the C-BEAM extruded rails for added strength. All of the plates for this were created using the C-BEAM machine I completed several month ago.
Build Author sebf34 Views 11720
OX Based cnc 3000 x 1500 Double belt
OX Based CNC
Build Author Iwan Müller Views 2034
Controlbox for a CNC Router
A Controlbox for my CNC-Router, containing stepper-drivers, Planet-CNC MK3 Controller and a Controlpanel with joysticks.
Build Author P. ry Views 8259
Nox 1500mm x 1500mm C-Beam
C-Beam build using a double C-Beam for the X axis. 1500mm x 1500mm
Build Author Krishnakumar Views 2519
Hobby OX CNC
This "hobby OX" CNC is built for multiple purposes such as cutting and engraving various materials, laser etching and cutting, etc... Its a great platform for hobby enthusiasts like me where this machine can be used for so many different purposes effectively and efficiently!
Build Author MattiasN Views 15936
MyCNC(1000mm x 1500mm)
My CNC project
Build Author Joe 90 Views 3802
Schematix OX metal build
OX metal build from an noob
Build Author Asaku Views 3643
Hi! This build is, or at least should be, a multipurpose box (mBOX). Due to limited space I want to build something that can serve multiple purposes such as 3d printing, 3d scan, plexiglass cutting and hopefully some milling too (both wood and metal). Switching between modes should involve switching heads and worksurface (change heatbed with a wood platform and viceversa). (for the scan part I'm thinking of integrating this opensource project into the frame: http://www.freelss.org/ )
Build Author mytechno3d Views 8374
Plasma cutting table
This is our plasma cutting table , based on the famous OX CNC . Can cut up to 15 mm ( steel , stainless , aluminium ) with a really good accuracy and at a really high speed .
Build Author semperfikurt Views 11533
Beefed-up and customized OX build
My Machine is based on the OX CNC designed by Mark Carew as well as the ooznest kit, and it incorporates a bunch of my own details and revisions to increase performance and robustness. It has become way more beastly than I originally planned!
Build Author David the swarfer Views 7954
The Nguni - an OX variant
A modified OX with more X clearance, MDF plates, vacuum table
Build Author Metalguru Views 2532
Custom black and red Big Ox
Build Author nate campbell Views 2529
CrOX Carbon Reinforced OX
Modified OX with carbon fiber reinforced X and Z axes. 1500mm Y, 1000mm X and 120mm Z clearence
Build Author Dexter Oddwick Views 2015
Black Rabbit 1500
This is a router that I designed that is loosely based on the Openbuilds Ox, but designed to be heavy duty, rigid, and yet quick and agile.
Build Author Erick Sauvé Views 2900
My first build: a other OX CNC
I love to build things. I decided to build a CNC machine to help me build more things! I had a lot of fun and I learn a lot of thing in the process of building this machine. p.s. my primary language is french not english. Forgive me if I made some mistake.
Build Author Matt Nelson Views 5759
I'm building an OX CNC router. It will be the larger size of 750x 1000mm. This should give me a working area of about 22"x30".
Build Author Ryan Lock Views 70394
Ooznest OX CNC Machine
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
Build Author Rwetzler Views 3586
This is a variant of a typical OX (Mark Carew inspiration) router using C-Beams/8mm Acme rods to drive all three axis. I went with a 1000mm x 1000mm frame size. Useable space is 28" (711mm) X 26" (660mm) with a Z axis work travel of approx. 3.25" (82.5mm). A TinyG is used as a controller along with Fusion 360/Chilipper as the software for generating and running gcode files.
Build Author Jasen Stengel Views 6946
GrOX (OX based router)
1000mm x 1500mm OX router using Openbuilds parts and plates by Chris Laidlaw
Build Author Catawissa_CNC Views 4806
Arctic Ox CNC Router
This is a cartesian CNC Router build that is based off the OX CNC build by Mark Carew. I am using Spark Concepts CNC xPro controller board and their 400w spindle kit.
Build Author eddyg Views 1749
OX with a Custom Electronics Case
Embarking on my first build and trying to start with a clean setup by creating an enclosure box for my controllers and power supply.
Build Author Gabriel Faber Views 6513
After completing a standard OX build, I found I didn't have enough Z-clearance and designed a set of taller gantry plates
Build Author Tim Pierce Views 4601
Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)
This project shows how to use Openbuilds Vv slot extrusions and wheels to retrofit a Lulzbot Taz 4 or 5 printer. These modifications improve layer consistency, eliminate nozzle and bed sag, and allow for larger toolhead mounting. Project updates and newer accessory files may be located at http://www.thingiverse.com/piercet/designs
Build Author Jan Turnnherr Views 2414
Ooznest OX CNC for Architecture Modell
While i achieved the desired taler Z axis this was very notable of the cost of the stiffness of the Y axis - the Y axis is now quite wobbly. i do not recommend such a big Z axis on a OX CNC machine where the requirement is a good precision.
Build Author Motions Views 11389
Screaming Ox CNC Machine
Big brother of the Charging Ox CNC machine.
Build Author roseundy Views 2902
A larger version of the OX.
Build Author Paruk Views 13618
OX 1500 x 1000 mm
Build Author Paruk Views 7527
A 3D Scanning Station
Build Author rcKeith Views 6238
Ooznest OX CNC Build
Ooznest OX CNC build
Build Author getoffmyland Views 8102
Water Buffalo - Water jet cut OX+
A modified OX based on Aluminum plates cut on a waterjet. Some new ideas and additions from other builds are included.
Build Author gavspav Views 3840
Ooznest build - 1500mm x 1000mm
Its the first build for me so its just the story of me attempting to build the kit and hopefully end up with something I can use. Hopefully without destroying anything or anyone.
Build Author evil2002usna Views 4683
Cheap Ballscrew Ox CNC Router.
Build Author Motions Views 27632
Charging Ox CNC Machine
A heavily modified Ox CNC build to replace SO2.
Build Author Serge E. Views 42724
myOX : a 4' x 2' OX CNC with potential
This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM
Build Author Colin Russon Views 3744
OX / X3 CNC / Similar Z axis / 1605 Linear Actuator
Z axes 1605 ballscrew, a comparative design proposal.
Build Author Builder+Bob Views 2509
Builder Bob's CNC
Here is the consolidation of my woodworking shop, a CNC Router!
Build Author Mark Carew Views 626681
OpenBuilds OX CNC Machine
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
Build Author Peter Oakes Views 18045
The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build
I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.
Build Author Jason Kraft Views 3246
The MULE (an OX inspired 3-axis CNC)
The Mule is a 3-axis CNC inspired by the OX CNC by Mark Carew. This machine borrows the OX's sturdy frame and upgrades the X and Y linear actuators through the use of three 500mm lead screws (as opposed to the belt system of the OX). The result is an inexpensive, sturdy, and powerful design built for cutting tough materials such as aluminum.
Build Author Kermareg Views 12038
[EN] Build of my Multiple OX CNC. It's goal is to run in 2 differents modes : router and 3D printer modes. The router mode will allows the use of a laser diode or a standard spindle. [FR] Construction d'une CNC basée sur l'OX pour des usages multiples. Deux modes principaux sont prévus : l'impression 3D et l'usinage via une defonceuses. Le mode usinage permettra à l'avenir de placerune tête laser pour effectuer quelques gravures simples. Une version française : http://kermareg.be/?page_id=103
Build Author Firetruckguy Views 6347
Nebraska 1246 x 1184
This is my first attempt at a CNC anything build
Build Author Steve Marsh Views 2467
Dust Shoe for Colt router and OxCarve
A simple 3D printed dust shoe for the cnc router. 2 parts held together with magnets for easy bit changes.
Build Author azarock Views 4005
Square shaped OX for doing general purpose engraving and cutting into wood, acrylic, and aluminum.
Build Author zann68 Views 3954
OX CNC 4'x4'
Out with the Old in with the New. Trying to build a nice clean setup that myself and my sons can use and enjoy.
Build Author Gary Bonard Views 2980
This is my second Ox with a working area of 14" x 14" x 5" I wanted to build a small sturdy potable CNC router and this OxZilla has the nice upgrades !
Build Author Bmoz Views 9618
Ox with Gecko Controller and CNC Linux
This build is the documentation of someone with no experience building the OX cnc machine with a Gecko G540 controller and CNClinux
Build Author Priit Paat Views 2128
My ox build
Build Author Gary Bonard Views 3000
The Ox That Wood
This is my story about my need for a CNC router on a budget that wound up in the $5K range !!! but I have a good belt drive Ox
Build Author Steve B Views 10619
OX PPR - Portable Plasma/Router
PPR = Portable Plasma/Router. A ~30x30"work area with leadscrews. Work surface is below support members. Can be placed ONTO cutting surface.
Build Author andrew Adsit Views 4653
OX 1000mm Y Axis Upgrade
Expands y-axis to 1000mm. 1/2 day build.
Build Author skape Views 3347
Zebu ( OX clone with Brasil materials)
An OX clone with alternative parts.
Build Author alex_b Views 7110
RONIN OX | The G10/Carbon Fiber Hogger
The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.
Build Author evildean Views 6055
OX-SUMO, SUMO-OX, OXSUMO?
One meter square. Short and stout.... reminds me of a Sumo Wrestler. A temporary and adjustable configuration I have devised to cut my own plates. I have kicked around ideas for about a year and the C-Beam extrusion has made this attempt to realize my ideas irresistible. This is just one step towards bigger and better things!
Build Author Dave Hylands Views 4733
My build of the OX kit from SMW3D.com
Build Author Dominic Ross Views 5886
Beaver's OX 1500
OX 1500mm x 1500mm w/1.5Kw Water Cooled Spindle & VFD ran by a Gecko G540 & Mach3
Build Author Raed Al Nuaimi Views 4195
Aluminium Router From Dubai
Another modification on the OX
Build Author Bear Views 7195
ANOTHER OX!~ Huge Thanks to Marc Carew and Open Builds. The primary reason I am building this CNC mill is to aid in my homemade snowboard creation. I am going to try and document as much of everything as I can and post it here to help others going a similar route. I know from past projects that taking the time to document each step can be tedious when you want to charge ahead but I will try! I hoping to get feedback on my design choices and set up as I am a complete newbie to CNC.
Build Author Knut Bøje Views 2175
My OX cnc upgrade.
Build Author robbell Views 8313
OX-Based Self-Contaned HVLP Spray Booth
A CNC HVLP spray booth based on OX.
Build Author John Eriksson Views 3415
Vic Aussie Ox
Dove in and ordered the kit from Makerstore in Melbourne. While awaiting for the order watched videos and sourced steppers and controllers from China. Had some fun with the 4 axis TB6600 controller board. Ran into a few problems with the build, but after stripping and restarting looks like I am on track.
Build Author robbell Views 2613
Cancelled - Modified OX CNC for Mitre Cutting (Picture Framing)
Creating a CNC mitre (45°) cutter, for picture frame cutting. Starting with an OX, but inverting various parts and adding a material table, with a stepper-controlled measuring guide.
Build Author Steve hope Views 10896
8x4 CNC build
Routy cnc upgrade.
Build Author openhardwarecoza Views 4440
Pocket Ox (Sheetmetal)
Small CNC - made with some custom lasercut+bent sheetmetal parts + Openbuilds V Slot
Build Author Neil Rosenberg Views 58531
The Frog: CNC Router
Frog CNC Router. Inspired by OX and "Routy". 24"x36" active working area, approx. 3" usable Z motion.
Build Author DrDitto Views 5137
Ooznest Moded CNC
Modded OX with full nema23 4 point support
Build Author jajohnsen Views 2178
This build is based of Ooznest 's OX CNC Mechanical kit (500x750) with a few mods if all goes as planned.
Build Author Calamari Views 3425
First Ooznest OX
The ooznest OX CNC Machine is based on the OX CNC Machine designed by Mark Carew of Openbuilds, and incorporates many upgrades from the Openbuilds community. Mark Carew based the OX on the Routy, which was in turn based on the Shapeoko
Build Author Robert.sims Views 9387
What I want to build is a unit to: rout wood, plastic and occasional aluminium . to be able to swap cutters. i.e. drragknife, laser, router, drill
Build Author CWidt Views 5431
OpenBuilds CAndC - CNC Machine
A new derivative of the famous OX CNC, with increases strength, rigidity, and accuracy.
Build Author Nickies Views 2290
This will be an OX based machine which I've designed to make the best use of my materials, be as precise as the design allows and operate as quietly as possible. I live in an apartment complex so space and noise are two important factors for me. Therefore the machine needs to do as much as possible while using little space and not annoy the neighbours.
Build Author James Gao Views 12641
An OX-inspired mini desktop mill. Designed in OpenSCAD, these parts are fully parametric and can be customized to your liking.