Select a Category
Build Author Lumberjack Engineering Views 553
SOLAC: Space Optimized LAser Cutter
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,200 USD.
Build Author Ronald van Arkel Views 22935
Routy GT2 290 BSX CNC Router, Low Cost and Good!
The Routy GT2 300 BSX CNC Router is a Low Cost CNC build. It performs the same as the larger Routy's from OpenBuilds but doesn't break the bank!
Build Author Kyo Views 31544
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
Build Author evilc66 Views 6183
My C-Beam 3D Printer
Larger format FDM printer using C-Beam linear stages
Build Author Chris Anderson Views 3702
Openbuilds Co2 80w Laser Cutter
Co2 80 watt openbuilds laser cutter, 1200mm laser tube, 1500x1000x500mm dimensions. Build frame first and then panels to be added.
Build Author Ryan Lock Views 60470
Ooznest OX CNC Machine
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
Build Author Mark Carew Views 36115
V-Slot™ Belt & Pinion Example Build
The OpenBuilds team has redefined the belt and pinion concept. By using standard OpenBuild components were able to improve on this system in ways that will save on cost and enhance its engineering capabilities.
Build Author Linkreincarnate Views 408
I have parts that are apparently not suited to a cnc router or a 3d printer. I am still trying to figure out what to make out of what I have,
Build Author Martin Bogomolni Views 3844
Delta-Six ( Jerry426 variant )
Building a Delta-6 variant, using recycled parts from a WolfStock Delta printer.
Build Author beardyblair Views 6847
My build log of an adapted Sphinx design with additional height and a larger X and Y axis.
Build Author Indieflow Views 46969
A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.
Build Author dodgenet Views 927
Budget 1500mm OpenBuilds V-Slot Deltabot Build
This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.
Build Author Mark Carew Views 582511
OpenBuilds OX CNC Machine
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
Build Author Hytech2k Views 24528
Triple Shot R-P-M Area 51 CNC Parts
We wanted to create a rapid prototyping machine with excellent 3D printing, laser cutting and engraving, and light CNC router work capabilities.
Build Author Sonny Lowe Views 10558
MakerSL MSL-5 Cantilevered 3D Printer
This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.
Build Author Steve B Views 9979
OX PPR - Portable Plasma/Router
PPR = Portable Plasma/Router. A ~30x30"work area with leadscrews. Work surface is below support members. Can be placed ONTO cutting surface.
Build Author Mark Carew Views 98629
C-Beam™ Machine - Plate Maker
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
Build Author Ronald van Arkel Views 7097
Upgrading the C-Beam machine
So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.
Build Author Larry_AK Views 6668
Pretty much a straight OPENBUILDS OX that slowly getting some modifications.
Build Author Anthony Bolgar Views 4736
L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes
This build is for a testing rig to use while testing out different controller boards for use with LaserWeb v3. It will also be used to test LaserWeb v3 as a CNC router/mill software in the near future. It is in the early stages, planning is complete, parts are ordered. Awaiting parts delivery to start build. Please not the BOM only covers parts from the OpenBuilds part store. I will be posting the other required items very shortly.
Build Author Mark Carew Views 39066
X Y Table OpenRail / V-Slot Build Examples
The X/Y table system is a great starting point for many CNC projects giving you the ability to move an object on the X and Y axis in a simple compact style.
Build Author semperfikurt Views 10592
Beefed-up and customized OX build
My Machine is based on the OX CNC designed by Mark Carew as well as the ooznest kit, and it incorporates a bunch of my own details and revisions to increase performance and robustness. It has become way more beastly than I originally planned!
Build Author Tim Pierce Views 3287
Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)
This project shows how to use Openbuilds Vv slot extrusions and wheels to retrofit a Lulzbot Taz 4 or 5 printer. These modifications improve layer consistency, eliminate nozzle and bed sag, and allow for larger toolhead mounting. Project updates and newer accessory files may be located at http://www.thingiverse.com/piercet/designs
Build Author Sonny Lowe Views 2362
MakerSL MSL-8 OB Vise
Small Machining Vise designed around 20x80 Openbuilds Rail System
Build Author AlexLee Views 5738
In Greek mythology, Talos (/ˈteɪlɒs/; Greek: Τάλως, Talōs) was a giant man of bronze made by Hephaestus (the Greek god of fire, metalworking, craftsmen and blacksmiths) who protected Europa in Crete from pirates and invaders. He circled the island's shores three times daily.
Build Author Bridge Port Views 2143
CNC Line Boring Machine
This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.
Build Author jjcolletta Views 6867
First 3d build
I am building a simple home brewed printer. I have a background in industrial automation so I figured how hard could this be. The mechanical build was pretty smooth as was the electrical side. Now just getting plastic out the hotend is my stopping point.
Build Author Mark Carew Views 25521
V-Slot™ Nema 23 Linear Actuator Build (Lead Screw)
Learn to build a super strong nema 23 lead driven linear actuator
Build Author inhan Views 11454
openbuilds rovo c-beam (700*1000)(1000*1000)한국오픈빌드
Open the build will create open and sharing. 오픈빌드는 만들고 오픈하고 공유합니다.
Build Author evil2002usna Views 4132
Cheap Ballscrew Ox CNC Router.
Build Author alan richard Views 6222
An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'
Build Author Mark Carew Views 41396
C-Beam™ Linear Actuator Build
Here are a few helpful C-Beam actuator ideas that will help you get a start on your builds
Build Author inhan Views 10953
Openbuilds rovo laser mini(오픈빌드)
laser mini 20 * 40 OPENBUILDS base frame.(크기 412x455mm) laser mini 20*40 기본프레임입니다. 기존 여러부품을 사용한 제품보다 부품수를 줄이면서 최소한의 단가를 뽑을려고 디자인했습니다.. 기존대비 부품수 절반에 단가도 절반을 줄이면서 최적의성능을 내려합니다.
Build Author jjcolletta Views 4364
Voxel OX Based Build
Building upon the great work done by Marshall Peck and others. I have started a new build.
Build Author Peter Oakes Views 15616
The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build
I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.
Build Author James Archer Views 3384
Archer - An extendable all metal 3D printer
This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.
Build Author UltiBots Views 4167
Machined Aluminum MagBall Carriages
Machined Aluminum MagBall Carriages
Build Author Mark Carew Views 9128
V-Slot Modular Sit/Stand Desk
In this build we put together an awesome modular stand-up or sit down desk that is perfect of any home or office.
Build Author Sonny Lowe Views 1666
MakerSL MSL-7 Laser Cut Tape Dispenser
An easy simple Tape Dispenser, spawned out of necessity, and shared for the fun of it...
Build Author Robert Hummel Views 29353
890KV OX RC spindle
This build is intended as a light alternative to the Dremel rotary tool.
Build Author Robert Hummel Views 16904
Stinger V Micro Mill
While building my OX AI I found myself with left over v slot and thought to myself, what do I need that I can build using them? Well since I make a lot of my own PCB boards for projects I figured a micro PCB mill would fit the bill ;) With inspiration from the OX and OX AI I give you the Stinger V :)
Build Author Iwan Müller Views 10756
CNC Router (Non OX)
My own Design (not an OX Derivative) using standard Parts.
Build Author The Dude Views 7038
Optical Limit + Home Switches
Optical home and limit switches for cnc, 3D printers, laser cutters, etc.
Build Author Ronald van Arkel Views 9879
Routy GT2 300 BSX CNC Router
This is the first project that I would like to share with you. I know the build looks familiar and it is; it’s based on kram242´s Routy. Work area is 300*500*55 mm and is NEMA17/GT2 belt driven.
Build Author zann68 Views 3546
OX CNC 4'x4'
Out with the Old in with the New. Trying to build a nice clean setup that myself and my sons can use and enjoy.
Build Author evildean Views 5725
OX-SUMO, SUMO-OX, OXSUMO?
One meter square. Short and stout.... reminds me of a Sumo Wrestler. A temporary and adjustable configuration I have devised to cut my own plates. I have kicked around ideas for about a year and the C-Beam extrusion has made this attempt to realize my ideas irresistible. This is just one step towards bigger and better things!
Build Author Wakez Views 2741
I'm starting my first own build cnc machine which is inspired by routy and the ox. Were my goal was not to use the ox plates but use the standard plates available in the parts store for the design.
Build Author Robert Hummel Views 40359
This will be an Aluminum OX build. Plates and all design credit goes to Mark from open builds. I may add my own touches but mainly this is to see how Aluminum plates perform
Build Author motopreserve Views 5688
Persnickety Plate Maker
My very first attempt at a CNC build. Based on the OpenBuilds C-Beam Machine, small tweaks will be made to tailor it for my goals: machining G10, aluminum & some carbon fiber for use with multirotor and motorcycle parts. I am looking forward to the day when I am comfortable enough to bring the ideas in my head to the tip of the end mill in a smooth fashion...
Build Author JakeWyman Views 2519
C-Beam on X, Y and Z Attempting to use internal channel first go around
C-Beam build using the small C-Beam gantry plates only.
Build Author Mark Carew Views 3778
Work Bench Stand
Here is a nice little simple build that will help to free up some extra space on your work bench. If your like me you need all the room on your work station you can use, so this is great to have.
Build Author winand Views 8840
YAOP (Yet Another Openbuilds Printer)
Yet Another Openbuilds Printer, my version :-P
Build Author Sam Dobbie Views 3182
A fully aluminium printer made from off the shelf components, no printed parts.
Build Author KBill Views 7953
MIY OLY Delta Printer
Mag arm deltabot with laser cut carriages and connectors.
Build Author nlfawcett Views 7943
Longhorn OX (Under Construction and In Progress)
I ran across the OX and knew it was the one I wanted to build. Some of the things I wanted to include was make it bigger and a little more solid than what the original plans called for. So here is where I am at so far. It will have a cutting area of 48" x 48". The waste board support frame will have more support rails. The Y axis will have (3) 20mm x 60mm rails instead of the original (2) that is called for. 1/4" aluminum OX plates. And a few more odds and ends.
Build Author Mark Carew Views 31186
V-Slot™ X -Y Stage Hidden Acme Rod Example
An X-Y Stage created from two self contained acme screw linear actuators. This build was published as an example of how many of the OpenBuilds Parts can be used.
Build Author inhan Views 7229
OPENBUILDS Korea (ROVO 1000)
I am very grateful to Mark Carew with passion and imagination. Therefore, the machine is good, but making the website there too daedanhaeseo The end of the same either way to invisible homework. Thank you for allowing openbuilds team submitted to the challenge once again for those with a passion that I feel like in Korea, I want to be a great help.
Build Author Justin Butler Views 3281
My Belt & Pinion Drive CNC Router
My CNC Router design and inspiration came from the Routy CNC project. I modified some of the aspects of the Routy build, but left the original XY dimensions intact. The build has been very enjoyable thus far and am nearing completion of all wiring in preparation for my first test run!
Build Author winand Views 12592
YAOR (Yet Another Openbuilds Router)
Yet Another Openbuilds Router, my version :-)
Build Author John foale Views 9317
Guitar shop CNC
Great bit of kit time will tell if it is up to the job
Build Author M^3 Views 11812
M Cubed CNC Mill
A no-nonsense CNC mini mill to get the job done.
Build Author BismarckDon Views 2943
Custom OX Build
Inspired by the original OX by Mark Carew, this is my Custom OX. Many small changes, additions, and upgrades. Build is in progress and this post will be updated regularly with photos. Enjoy!
Build Author Hytech2k Views 3594
Micro Ox 2 x 2
Micro Ox Build
Build Author RogueGeek Views 7829
Yet Another Ox Build
This build log will chronicle the construction of my oversize (1000mm X 1500mm) OX router.
Build Author Nugz Views 8796
Angus : A Slightly "Beefier" OX
This is where I will share my attempt at building a slightly "beefier" OpenBuilds OX CNC Machine using commonly available parts in the spirit of OPENBUILDS and Open Source in general. I have a tendancy to over-build things so I will be balancing that tendacy against budget constraints and common sense as much as possible.
Build Author Pol Feliu Views 4829
Batxillerat Research Project: Design and construction of a CNC
I'm working on a cartesian cnc router for my school research project
Build Author Robert J Rissell Views 2262
Remix of Sage's Delta-Six
I'm looking to build a large build-volume, accurate, steady 3D printer with the eventual aim of swapping in a diode laser to allow for use as a cutter for printing/cutting parts out of balsa sheet for building model aircraft.