Select a Category
Build Author Martin.Barfoed Views 52189
Large format 1200X1500mm OX Build using Stainless Steel plates, dual belt configuration. Limit switches is a mix of micro switches and NPN Proximity switches. Electronics based on parallel break out board, Long Motor Stepper drivers (Chinese stuff) and motors controlled by Mach3. Spindel will be Kress 1050.
Build Author Huub65 Views 2839
My C Beam - NEMA 17 - GRBL- Arduino project
Cbeam machine. Using small stepper motors (NEMA 17) and Arduino controller. Try to get this working in de upcoming month.
Build Author Mark Carew Views 29656
V-Slot™ Nema 23 Linear Actuator Build (Lead Screw)
Learn to build a super strong nema 23 lead driven linear actuator
Build Author THE LINK Views 1177
2020 First build.
Probably cheapest DIY build youl see.
Build Author Hisha Views 1885
Routy based build
Routy based build using 1000mm Y axis beams and 500mm X axis beams. Using a 20x80 Z axis to use the OpenBuilds router mount.
Build Author 3D Meister Views 1434
Camera slider with rotation prototype
I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.
Build Author Matt Barile Views 1895
Fixed Gantry Welded Steel Router
Fully welded, fixed gantry CNC router, with chinese linear motion parts, in progress
Build Author Lumberjack Engineering Views 5708
SOLAC: Space Optimized LAser Cutter
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
Build Author taratata2016 Views 2153
Panther 3D printer
After use of the i3 Prusa 200x200x180, the volume increases to 300x300x450 on the V-Slot and driven by a Megatronics V3
Build Author BeTrue3D Views 7702
High Quality CoreXY with focus on quality and optimized printarea versus physical size of the printer.
Build Author Ronald van Arkel Views 9473
Upgrading the C-Beam machine
So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.
Build Author ANDRESCAMPA Views 2275
SUPER OX NEMA 34 1600 OZ Motors!!!
CNC OX 1500X3000
Build Author Steven Sampson Views 6364
A CNC router designed to handle a 4'x8' sheet, for as close to $2000 as possible. The price barrier resulted in my choice to use timing belts rather than leadscrews or rack&pinion. Build List still being updated
Build Author Dexter Oddwick Views 2664
Black Rabbit 1500
This is a router that I designed that is loosely based on the Openbuilds Ox, but designed to be heavy duty, rigid, and yet quick and agile.
Build Author Julius Views 11858
OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative
1000x1000mm Ballscrew driven OX Derivative. Dewalt 611 spindle and TB6600 Drivers.
Build Author Bridge Port Views 3701
CNC Line Boring Machine
This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.
Build Author Rwetzler Views 4417
This is a variant of a typical OX (Mark Carew inspiration) router using C-Beams/8mm Acme rods to drive all three axis. I went with a 1000mm x 1000mm frame size. Useable space is 28" (711mm) X 26" (660mm) with a Z axis work travel of approx. 3.25" (82.5mm). A TinyG is used as a controller along with Fusion 360/Chilipper as the software for generating and running gcode files.
Build Author Richard Gouge Views 4298
C-Beam Big Mouth
My first build was with the basic C-Beam Build. I soon found the z clearance a little constricting So I added 2 500 mm actuators to support the x axis rail . I also left off the front and back y axis support rails for easy cleaning. I mounted the base of the machine to 1/2" mdf with 10/32 screws and blind nuts.
Build Author Keteland Views 6155
MULIMATERIAL 3D PRINTER (in progress)
ELECTRONICS - ARDUINO Mega 2560 + RAMPS 1.4 + power supply 12V - Leadshine DM 5042 external driver + Power supply 36V + NEMA 23 stepper motor SOFTWARE - Repetier Host to communicate with the Ramps - ARDUINO to upload the firmware (Marlin) MECANIC - V-Slots rails 40x40 + home-made plates - everything goes fine on the side of the build
Build Author Dantheman Views 3933
This unit is made with openbuild v-rail and c-beam. using direct drive with lead screws. Nema23 motors
Build Author Gary Bonard Views 3293
This is my second Ox with a working area of 14" x 14" x 5" I wanted to build a small sturdy potable CNC router and this OxZilla has the nice upgrades !
Build Author zelos Views 9018
ZelosLaser Engraver/Cutter 2.0 : Sturdy & Versatile
Zelos Laser Cutter Version 2.0 GRBL Shield with Nema 17 motors. 2 Watt laser for cutting and fine grayscale pictures built very sturdy and modular
Build Author MikieLikesIt Views 4545
Cousin CNC OX Router
I hope to be able to cut out larger gantry plates with some modifications. I would like to do some 3D cuts in the near future. I've also read about doing some lithophane projects for Christmas.
Build Author Michael Burns Views 5496
My Little OX
This build has been an educational experience. Software and hardware alike.
Build Author sgspenceley Views 56431
Linear Rail CNC Machines
A CNC build using linear rails & lead screws.
Build Author M^3 Views 13563
M Cubed CNC Mill
A no-nonsense CNC mini mill to get the job done.
Build Author andrew Views 14325
This small desktop machine is built inside a 300mm cube of 20mm extrusion. Work area is 14cm by 14cm. I used 400 step nema17 motors all around.
Build Author Sheepdog Views 18994
Griffin Delta Printer
Designed from the ground up as a low cost, highly scalable delta printer. This printer has been built as small as carry on luggage size, up to an 18in wide print surface and is capable of larger. Approximate cost is low to mid $500 range start to finish, including electronics for a basic model.