Select a Category
Build Author evgeny156 Views 285
3D Printer on Prusa architecture with best parts available
Wanna quet an nice looking device done by my hands
Build Author mikev Views 2653
C-Beam Evolution MkII
The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.
Build Author Robert E. Nee Views 1677
Large cartesian gantry style 3D printer
This will be a fixed bed, v-slot implemented X,Y,Z axis gantry style 3D printer.
Build Author IndyMaker Views 4173
Ooznest Ox with 3D Printed Gantry Plates
Ooznest Ox with gantry plates and end caps 3D printed in ABS rather than aluminum.
Build Author Ronald van Arkel Views 8445
Upgrading the C-Beam machine
So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.
Build Author peter28 Views 1588
i wanted to use both the ox and the C beam C beam for the gantry because its stronger i also made the gantry 20 mm higher so i can cut thinker material i will maybe later go to rack& pinion on the 1500 mm Y axes also instead of the V wheels i will maybe go to hiwin in the furture
Build Author Metalguru Views 3403
Metalguru's C-Beam 750
This is a C-Beam build, fairly heavy duty, and 750mm x 750mm. Should be a good, sturdy machine that's relatively easy to assemble.
Build Author Mark Carew Views 48815
V-Slot™ Linear Actuator Build (Belt Driven)
Quick and Simple V-Slot Gantry System. This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts. You can mount this system an many ways so be sure to download the example models.
Build Author Moag Views 9368
Moag's CNC Mill
A design in progress, to 3D carve two-part Aluminium injection moulds for Soft Plastic Lures and Lead Jigs, so I can prototype some of the concepts rattling around in my head. All Openbuilds parts where possible, 1000x500mm footprint, 0.8kw Water-cooled Spindle?, High Torque Stepper?,Smoothieboard?, I still have no idea. As a newbie to the CNC world, any wisdom would be welcome to take this from just a idea into reality so I can start playing with all this awesome stuff. Thanks in advance
Build Author Goran crno Views 3961
New Custom CNC with C-Beam Rails
Hello all, wanted to share my custom build that I planed to do. My idea was to drill foam blocks to make molds for my projects. The CNC will be 1500-1500mm with a higher Z-Axis. So I redesigned the Gantry Plates that will be cut out at some other place. I hope you can share your opinion on my project.
Build Author Dave Ashley Views 4338
Sketchup Design of a PVC CNC I Intend to build.
Build Start to begin Feb 1st.
Build Author Jesse Jenkins Views 6067
Hedron's build with Ooznest kit and Xylotex motors
A 3-axis flying gantry (4'x4') mechanical kit is assembled. A 3D printer is used to make cable chain for tidy and cheap wire management. A BeagleBone Black development platform with Machinekit software (LinuxCNC) is configured to control a Xylotex motor driver box connected to an Openbuilds Ox direct-drive pulley and belt motion system. A vacuum dust-collection system is designed, CNC-routed and installed. A steel table is made to mount the table onto.
Build Author MikieLikesIt Views 4267
Cousin CNC OX Router
I hope to be able to cut out larger gantry plates with some modifications. I would like to do some 3D cuts in the near future. I've also read about doing some lithophane projects for Christmas.
Build Author James Gao Views 12710
An OX-inspired mini desktop mill. Designed in OpenSCAD, these parts are fully parametric and can be customized to your liking.
Build Author jkenn13 Views 7618
The purpose of this build is to create a simple, strong modular build that is rugged enough to cut out some of the softer metals along with wood and plastics. Using basic parts like the universal plates, t-nuts and v- wheels coupled with the strength of C-Beam I am sure this will deliever the desired results!!