Select a Category
Build Author Ariel Yahni Views 4437
Modifying the K40 laser cuter stock gantry in favor of OpenBuilds superior and smoother movement. Also will provide me a better level control for easier beam alignment.
Build Author Venturebit Views 415
SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer
The whole system is powered by 12V / DC power. Process it into Pellets or Granules to use it with your 3D Printer or Filament Extruder. Our self-developed steppermotor Controls allows you to optimally adjust Feedrate for your Situation. Forward, Backward and Stop is integrated for easy operation. The Speed can be continuously regulated via rotary switch.
Build Author Brian Slee Views 16214
Ultimo is the ultimate multi tool for the person who's serious about prototyping new ideas. A Delta Robot frame supports 3d printing up to 450mm in diameter, a powerful CNC Mill, and 50 amp plasma cutter for processing steel plate. And that's just a start.....wait till you see some of the other attachments we are currently working on incorporating.
Build Author Anthony Bolgar Views 4421
L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes
This build is for a testing rig to use while testing out different controller boards for use with LaserWeb v3. It will also be used to test LaserWeb v3 as a CNC router/mill software in the near future. It is in the early stages, planning is complete, parts are ordered. Awaiting parts delivery to start build. Please not the BOM only covers parts from the OpenBuilds part store. I will be posting the other required items very shortly.
Build Author mytechno3d Views 14278
A low cost and easy to build laser cutter based on 2.8w laser diode .
Build Author Anglesachse Views 4387
Corexy, with possible head change (3d, cnc, laser)
Build Author snokid Views 1653
http://www.buildlog.net/sm_laser/drawings.html using this as a baseline.... Going to try and use all or most off the shelf parts.
Build Author Metalguru Views 2019
Dragon Portable CNC Plasma Cutter
A small portable CNC Plasma Cutter with some unique features
Build Author Yoshiya Arii Views 16063
V-Slot Laser cutter and engraver
The Smart Laser Mini is an open source such as use Raspberry pi. Easy to assemble type of desktop laser cutter and engraver. Also we used V-slot
Build Author Dave420 Views 3138
Powder coated multi CNC Z Axis plasma adapter with Prox.
Powder coated multi CNC Z Axis plasma adapter with Proximity sensor. . It can also hold a 80mm Router head/Spindle as seen in my router build.
Build Author Max_Sijbers_Mechatr... Views 2700
In the expo projects during the second year of engineering students. the project group who made this rapport made a laser cutter for the students of Fontys Hogeschool Engineering to use this machine for creating parts for their projects. The goal of Project Laser Cutter is to build a laser cutter, which is safe and can be used within the school. Also it has to be able to cut through 10 millimetres thick acrylic material or 10 millimetres thick plywood. This project will follow the V-model. This
Build Author blindflight Views 3444
This is a mount I wanted to build for a laser project using OpenBuilds part router mount.
Build Author openhardwarecoza Views 17546
openBuilds FreeBURN-2-Mini V-slot CO2 Laser (40-50w)
A new mini version of the http://openbuilds.com/builds/openbuilds-freeburn-1-v-slot-co2-laser-60-100w.1001/ FreeBurn CO2 Lasercutter
Build Author Steve B Views 8922
OX PPR - Portable Plasma/Router
PPR = Portable Plasma/Router. A ~30x30"work area with leadscrews. Work surface is below support members. Can be placed ONTO cutting surface.
Build Author Rusticalmond Views 4430
CNC Hot Wire Cutter 4 Axis for Cutting Foam Wings
My build is to allow me to cut foam wings using CNC Hot Wire Cutter.
Build Author openhardwarecoza Views 18563
Plasma cutter - 608 on steel tube version
CNC Plasma cutter: 608ZZ on steel square tube linear rollers Welded frame HDT2-15 Belt Drive Tradeweld Cut-40 Plasma cutter with converted hand torch Virtual Torch Height Control through inductive probing - open source electronics project
Build Author Sjors Views 4103
Laser cutter project by students
This build is made by students from Fontys Hogescholen Eindhoven, department Engineering. Every quarter a new group continues the work of the previous group. We have been working on the project since september 2015, and as it is a work in progress, a lot will be added later. The first months have mainly been about designing and building an XY-table on which later all the electronic components will be added and the laser.
Build Author KBill Views 7773
MIY OLY Delta Printer
Mag arm deltabot with laser cut carriages and connectors.
Build Author rcKeith Views 11218
Hot Wire 4 Axis CNC Foam cutter
This build uses drawer slides and thread rod to create foam wings and fuselages by passing a hot wire through the foam which makes very accurate shapes. I built a Radio Controlled SuperVC10 using foam but did have a cnc machine then so I had to make many templates to guide the hot wire. This inspired me to build a cnc hot wire cutter. Works really well and have made several RC models with it now
Build Author zelos Views 7299
ZelosLaser Engraver/Cutter 2.0 : Sturdy & Versatile
Zelos Laser Cutter Version 2.0 GRBL Shield with Nema 17 motors. 2 Watt laser for cutting and fine grayscale pictures built very sturdy and modular
Build Author Cameron1995 Views 4634
3 Axis MultiTool - 3D printer, CNC Mill and Plasma Cutter
So in short this build is a work in progress; it aims to make a large 3d printer, medium size CNC mill and a small plasma cutter all in one CNC unit.
Build Author Jovian Views 11756
Proteus is the Greek God of change. Besides the numerous aspect of 3D printing that this could relate to this machine like the god can change. The Build allows for an interchanging head that will allow different functionality to be quickly and easily adapted. So you could print clay, silicon, plastic, cut with a laser cutter or even attach a rotary tool
Build Author Mohsen Abbasi Views 3311
Portable Foam Cutter
A portable foam cutter to make your forms everyware using a LiPo Battery.
Build Author JCPhlux Views 9846
Large 1500x1000 Laser V
I am building a Laser cutter based off Robert Hummel's Laser V design.
Build Author mirage335 Views 7129
Multi-tool 3D printer, laser cutter, and CNC mill.