Select a Category
Build Author Polymergraphy Views 882
Skyggen 3D Printer
GT2 belt-driven Cartesian 3D Printer on an OpenBuilds Extrusion gantry, developed through Autodesk Fusion 360.
Build Author Joortiz1 Views 1084
Norm Inverted - Cartesian
As a tinkerer and hobbyist I need a reliable quality printer on a budget... Meaning I'm not looking to buy a: Prusa, Zortrax or LulzBot because of the added cost their marketing adds. I can definitely build a machine of hopefully equal quality at a lower cost that is not impacted by the marked-up priced from a large reputable manufacturer. I will need to dedicate time and more time for design shakedowns to ensure I produce a quality machine. Bare with me on this build... Thanks!
Build Author Elmo Clarity Views 3881
A TrueUp Glide modified to use 20x40 V-Slot with a 300x300 bed.
Build Author Bud Griffin Views 3398
BF3D OX (Big Freakin' 3D OX)
This is my latest printer build. The second printer I've built using V-Slot.
Build Author Marshall Peck Views 48492
Voxel OX - Extendable 3D Printer and CNC Platform
An open source 3D printer design with a sturdy V-Slot frame
Build Author Gary Monroe Views 3093
C-Beam Desktop On Rails
My attempt at a Desktop CNC using C-Beam and Open-Rail with Steel Wheel bearings and LeadScrew Drive.
Build Author mikev Views 4776
C-Beam Evolution MkII
The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.
Build Author FancyKiddo Views 4290
Triangular CNC Milling Machine
A wonky build to eliminate slop on a long Z axis
Build Author runninfarmer Views 3338
Mid range build.
Build Author J-Wahl Dezign Views 3489
1.4 meter tall build height, 300x410mm build plate cartesian
The original plan was to build a 3d printer with a 1200x1200 build platform with a 600mm build height. I was having issues getting ahold of a large enough borosilicate glass plate for the build so I decided to go for build height. I plan on using a smoothieboard for the controller. The build has currently slowed down. I was removing a broken drillbit from the linear rail mount, and it shattered and took out my eye. I am doing what I can when I can focus my eyes long enough for the build.
Build Author techmod Views 4093
This is going to be a more or less detailed how to build BetterBot. Pictures and more (decent) text are to be added.
Build Author Martin Skov Nielsen Views 3019
Stainless OX kit
This is a 1500 X 1500 Stainless OX kit build, by a cnc novice. It is the first cnc machine i have ovned and build I got this kit from http://makersupplies.dk/20-ox-cnc-kits
Build Author Bob K Views 5631
Dream to practical
This is my journey from a dream machine to a practical (for me) machine. This is a Cartesian style frame that can change tool heads quickly. The first version will have milling and 3D printing tool heads. Later on I'll add a drag knife tool head.
Build Author Joe 90 Views 4533
Schematix OX metal build
OX metal build from an noob
Build Author ahayden Views 11741
C-Beam Prefab Untitled
The C-Beam Prefab Untitled is designed as the cartesian compliment to the C-Beam XL. With the exception of requiring a couple more 1000mm C-Beams and lead screws, the build requires a minimum of additional parts. The primary intention of the build is to maximize the cutting envelope while still staying within the sweet spot for C-beam rigidity. This design can easily be modified and allows for further custom structural components to be cut with the initial build platform.
Build Author soup3y Views 2183
This build will hopefully be 18x18x24 build space using RAMPS 1.4 with Marlin firmware. Using NEMA 17 motors and belts to drive the X and Y axis, lead screws for the Z axis. The build plate will be heated with a delrin Y carriage for the glass and heatbed. Z axis motors will be top mounted. Possibly and ATX power supply.
Build Author James Archer Views 5512
Archer - An extendable all metal 3D printer
This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.
Build Author Jasen Stengel Views 7340
GrOX (OX based router)
1000mm x 1500mm OX router using Openbuilds parts and plates by Chris Laidlaw
Build Author griso Views 4666
Over 840 parts. Of whom around 450 are screws and nuts, more than 100 parts are printed on a 3D printer, the frame consists of about 60 components. There is nearly 40 electrical components connected with tens of meters of wires, most of them sleeved.
Build Author Sonny Lowe Views 13537
MakerSL MSL-5 Cantilevered 3D Printer
This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.
Build Author PaulS Views 10139
UltiFaker 2 Go
This is a breakdown of how I designed the UltiFaker 2 Go as well as how I machined and assembled it. I'll include a complete BOM and all of the drawings and prices.
Build Author Tazilla Views 6340
This build is inspired by the Lulzbot Taz printers and makes use of the new OpenBuilds C-Beam
Build Author Keith Davis Views 9754
OneZ gets it's name from it's most unique feature - only motor for the Z axis while maintaining the stability of two bearing guides for the Z axis. Reduction to one Z motor eliminates need for auto bed leveling.
Build Author azarock Views 4364
Square shaped OX for doing general purpose engraving and cutting into wood, acrylic, and aluminum.
Build Author zann68 Views 4353
OX CNC 4'x4'
Out with the Old in with the New. Trying to build a nice clean setup that myself and my sons can use and enjoy.
Build Author AlexLee Views 7341
In Greek mythology, Talos (/ˈteɪlɒs/; Greek: Τάλως, Talōs) was a giant man of bronze made by Hephaestus (the Greek god of fire, metalworking, craftsmen and blacksmiths) who protected Europa in Crete from pirates and invaders. He circled the island's shores three times daily.
Build Author Sam Dobbie Views 3967
A fully aluminium printer made from off the shelf components, no printed parts.
Build Author Mike Andrews Views 5854
Monster - a multiple material 3D printer with 20"(X) X 14"(Y) X ~20"(Z)
A Laut3k derivative that goes for volume and large number of print materials at the same time. Using OpenBuild linear motion systems to get away from belt drives.
Build Author Justin Butler Views 3992
My Belt & Pinion Drive CNC Router
My CNC Router design and inspiration came from the Routy CNC project. I modified some of the aspects of the Routy build, but left the original XY dimensions intact. The build has been very enjoyable thus far and am nearing completion of all wiring in preparation for my first test run!
Build Author Neil G. Views 6939
STEAM crane printer
The STEAM Crane 3d printer uses the new C-Beam linear rail. It is being developed for an after school / summer camp program for kids. All of the electronics are housed in the base and the wiring is routed down the channels of the c-beam. This is done to contain as much of the loose wiring as possible, hopefully keeping it safer for kids.
Build Author Darren Ditto Views 6943
V 1.4 - Bright Box Cartesian Printer - *BUILD PROGRESS PICTURES
Cartesian Printer, 200mm x 200mm x 380mm build area, enclosed, belt and pinion movement, heated bed, Raspberry Pi, Pi Cam, OctoPrint
Build Author Fisher Views 3442
My first custom build, using vslot rails for Z and Y and 8mm rails for X. Currently printing parts for this using my Prusa I3. The build volume will be roughly 300mm^3, X and Y are belt driven with 8mm acme lead screws for Z. Will be uploading more info shortly as i continue to build the printer.
Build Author nidal Views 8837
Simple cartesian style CNC. Uses ACME screws for all 3 axes, 20x40 v-slots and should have 50cm x 50cm x 50cm work volume.
Build Author DiggerJ Views 4939
Pink Panther - MendelMax variant
Taller and wider MendelMax 1.5 spinoff
Build Author Larry_AK Views 7548
Pretty much a straight OPENBUILDS OX that slowly getting some modifications.
Build Author Pol Feliu Views 5530
Batxillerat Research Project: Design and construction of a CNC
I'm working on a cartesian cnc router for my school research project
Build Author Jeremy Views 7039
Ez3D - Phoenix 3D Printer Build
This is my 1st submission to openbuilds.com and my 1st venture into building a 3D Printer. The Phoenix 3d Printer is a kit from Ez3D, a company based out of Colorado, started and backed by successful Kick-starter and IndieGogo campaigns. The Phoenix 3d Printer kit is currently backlogged 10 to 12 weeks which means quite a wait. I will be chronicling my experience with this kit as I get it done.