Welcome to Our Community

Unlock hidden features. Sign Up for Free Today!

Indie i2

May 2, 2017
Category
Cartesian Style Bots
Build Progress
Build Complete!

A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.

Openbuilds Co2 80w Laser Cutter

Apr 28, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Co2 80 watt openbuilds laser cutter, 1200mm laser tube, 1500x1000x500mm dimensions. Build frame first and then panels to be added.

WannaBe CNC - First time design and build

Apr 5, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

Design Change - Version 2.0 has a smaller foot print, custom gantry supports, and front and back covers. I will use standard V-Slot for gantry supports leaving me enough travel to manufacture the customer supports with this machine when completed. then update to final build. I also plan to install the controller into the front cover and power supply into the back cover. Should be nice and tidy.

C-beam Sphinx

Mar 29, 2017
Category
Cartesian Style CNC
Build Progress
Build Complete!

A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..

1.4 meter tall build height, 300x410mm build plate cartesian

Mar 26, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

The original plan was to build a 3d printer with a 1200x1200 build platform with a 600mm build height. I was having issues getting ahold of a large enough borosilicate glass plate for the build so I decided to go for build height. I plan on using a smoothieboard for the controller. The build has currently slowed down. I was removing a broken drillbit from the linear rail mount, and it shattered and took out my eye. I am doing what I can when I can focus my eyes long enough for the build.

SOLAC: Space Optimized LAser Cutter

Mar 9, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.

L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes

Mar 9, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

This build is for a testing rig to use while testing out different controller boards and CAM software for milling and routing. It is in the early stages, planning is complete, parts are ordered. Awaiting parts delivery to start build. Please not the BOM only covers parts from the OpenBuilds part store. I will be posting the other required items very shortly.

Amazon Special

Feb 10, 2017
Category
OTHER BUILDS/PROJECTS
Build Progress
Build in Progress...

I have parts that are apparently not suited to a cnc router or a 3d printer. I am still trying to figure out what to make out of what I have,

Budget 1500mm OpenBuilds V-Slot Deltabot Build

Jan 24, 2017
Category
Delta Bots
Build Progress
Build in Progress...

This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.

Upgrading the C-Beam machine

Jan 20, 2017
Category
Other Style CNC Mills
Build Progress
Build in Progress...

So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.

Beefed-up and customized OX build

Sep 13, 2016
Category
X/Y Table Style CNC Mill
Build Progress
Build Complete!

My Machine is based on the OX CNC designed by Mark Carew as well as the ooznest kit, and it incorporates a bunch of my own details and revisions to increase performance and robustness. It has become way more beastly than I originally planned!

CNC Line Boring Machine

Aug 8, 2016
Category
Everything Else
Build Progress
Build Complete!

This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.

Ooznest OX CNC Machine

Jul 19, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.

Archer - An extendable all metal 3D printer

Jul 15, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.

MakerSL MSL-5 Cantilevered 3D Printer

Jun 23, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.

Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)

Jun 20, 2016
Category
Cartesian Style Bots
Build Progress
Build Complete!

This project shows how to use Openbuilds Vv slot extrusions and wheels to retrofit a Lulzbot Taz 4 or 5 printer. These modifications improve layer consistency, eliminate nozzle and bed sag, and allow for larger toolhead mounting. Project updates and newer accessory files may be located at http://www.thingiverse.com/piercet/designs

Core-XY Cube

Jun 15, 2016
Category
H-Bot and Core XY
Build Progress
Build Complete!

An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'

OpenBuilds C-Beam Double Slider

May 20, 2016
Category
Camera Sliders - Rigs
Build Progress
Build Complete!

This slider uses an 500mm OpenBuilds C-beam and the design is such that the effective length of the slider is slightly less then twice the length of the C-Beam. It can be used both motorized or not.

OpenBuilds OX CNC Machine

Jan 27, 2016
Category
Cartesian Style CNC
Build Progress
Build Complete!

OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!

The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build

Jan 20, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.

Wakezor

Dec 27, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I'm starting my first own build cnc machine which is inspired by routy and the ox. Were my goal was not to use the ox plates but use the standard plates available in the parts store for the design.

Talos3D

Dec 10, 2015
Category
Cartesian Style Bots
Build Progress
Build Complete!

In Greek mythology, Talos (/ˈteɪlɒs/;[1] Greek: Τάλως, Talōs) was a giant man of bronze made by Hephaestus (the Greek god of fire, metalworking, craftsmen and blacksmiths) who protected Europa in Crete from pirates and invaders. He circled the island's shores three times daily.

OX-SUMO, SUMO-OX, OXSUMO?

Nov 10, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

One meter square. Short and stout.... reminds me of a Sumo Wrestler. A temporary and adjustable configuration I have devised to cut my own plates. I have kicked around ideas for about a year and the C-Beam extrusion has made this attempt to realize my ideas irresistible. This is just one step towards bigger and better things!

Work Bench Stand

Oct 29, 2015
Category
Furniture Builds
Build Progress
Build Complete!

Here is a nice little simple build that will help to free up some extra space on your work bench. If your like me you need all the room on your work station you can use, so this is great to have.

X Y Table OpenRail / V-Slot Build Examples

Sep 28, 2015
Category
Everything Else

The X/Y table system is a great starting point for many CNC projects giving you the ability to move an object on the X and Y axis in a simple compact style.

V-Slot™ X -Y Stage Hidden Acme Rod Example

Sep 17, 2015
Category
Everything Else

An X-Y Stage created from two self contained acme screw linear actuators. This build was published as an example of how many of the OpenBuilds Parts can be used.

V-Slot™ Belt & Pinion Example Build

Sep 17, 2015
Category
Everything Else

The OpenBuilds team has redefined the belt and pinion concept. By using standard OpenBuild components were able to improve on this system in ways that will save on cost and enhance its engineering capabilities.

Openbuilds rovo laser mini(오픈빌드)

Sep 16, 2015
Category
Laser Cutter Builds
Build Progress
Build Complete!

laser mini 20 * 40 OPENBUILDS base frame.(크기 412x455mm) laser mini 20*40 기본프레임입니다. 기존 여러부품을 사용한 제품보다 부품수를 줄이면서 최소한의 단가를 뽑을려고 디자인했습니다.. 기존대비 부품수 절반에 단가도 절반을 줄이면서 최적의성능을 내려합니다.

My Belt & Pinion Drive CNC Router

Aug 28, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

My CNC Router design and inspiration came from the Routy CNC project. I modified some of the aspects of the Routy build, but left the original XY dimensions intact. The build has been very enjoyable thus far and am nearing completion of all wiring in preparation for my first test run!

Persnickety Plate Maker

Aug 13, 2015
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

My very first attempt at a CNC build. Based on the OpenBuilds C-Beam Machine, small tweaks will be made to tailor it for my goals: machining G10, aluminum & some carbon fiber for use with multirotor and motorcycle parts. I am looking forward to the day when I am comfortable enough to bring the ideas in my head to the tip of the end mill in a smooth fashion...

Routy GT2 300 BSX CNC Router

Jun 24, 2015
Category
Cartesian Style CNC
Build Progress
Build Complete!

This is the first project that I would like to share with you. I know the build looks familiar and it is; it’s based on kram242´s Routy. Work area is 300*500*55 mm and is NEMA17/GT2 belt driven.

Custom OX Build

Apr 27, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Inspired by the original OX by Mark Carew, this is my Custom OX. Many small changes, additions, and upgrades. Build is in progress and this post will be updated regularly with photos. Enjoy!

Longhorn OX (Under Construction and In Progress)

Mar 30, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I ran across the OX and knew it was the one I wanted to build. Some of the things I wanted to include was make it bigger and a little more solid than what the original plans called for. So here is where I am at so far. It will have a cutting area of 48" x 48". The waste board support frame will have more support rails. The Y axis will have (3) 20mm x 60mm rails instead of the original (2) that is called for. 1/4" aluminum OX plates. And a few more odds and ends.

OPENBUILDS Korea (ROVO 1000)

Feb 7, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I am very grateful to Mark Carew with passion and imagination. Therefore, the machine is good, but making the website there too daedanhaeseo The end of the same either way to invisible homework. Thank you for allowing openbuilds team submitted to the challenge once again for those with a passion that I feel like in Korea, I want to be a great help.

OX AI

Jan 24, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will be an Aluminum OX build. Plates and all design credit goes to Mark from open builds. I may add my own touches but mainly this is to see how Aluminum plates perform

First 3d build

Dec 16, 2014
Category
Cartesian Style Bots
Build Progress
Build Complete!

I am building a simple home brewed printer. I have a background in industrial automation so I figured how hard could this be. The mechanical build was pretty smooth as was the electrical side. Now just getting plastic out the hotend is my stopping point.

Angus : A Slightly "Beefier" OX

Dec 1, 2014
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This is where I will share my attempt at building a slightly "beefier" OpenBuilds OX CNC Machine using commonly available parts in the spirit of OPENBUILDS and Open Source in general. I have a tendancy to over-build things so I will be balancing that tendacy against budget constraints and common sense as much as possible.

Stinger V Micro Mill

May 24, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

While building my OX AI I found myself with left over v slot and thought to myself, what do I need that I can build using them? Well since I make a lot of my own PCB boards for projects I figured a micro PCB mill would fit the bill ;) With inspiration from the OX and OX AI I give you the Stinger V :)

Remix of Sage's Delta-Six

May 6, 2014
Category
Delta Bots
Build Progress
Build in Progress...

I'm looking to build a large build-volume, accurate, steady 3D printer with the eventual aim of swapping in a diode laser to allow for use as a cutter for printing/cutting parts out of balsa sheet for building model aircraft.

Aluminum Ox

Mar 15, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

I have been looking for a good solid kit to build off of for some time and when I saw the Ox buildlog I knew I had to have one. Ordered most of the pieces from Open Builds and started planning. Had a nice gentleman named Chris cut the required plates from 6061 aluminum for me (he sells them on eBay now if you're interested) and got to work.

Loading...
Loading Build images...
  • About Us

    The OpenBuilds Team is dedicated helping you to Dream it - Build it - Share it! Collaborate on our forums and be sure to visit the Part Store for all your Building needs!
  • Like us on Facebook

  • Support Open Source FairShare Program!

    OpenBuilds FairShare Give Back Program provide resources to Open Source projects, developers and schools around the world. Invest in your future by helping others develop theirs!

    Donate to FairShare!