Select a Category
Build Author Mark Carew Views 109283
C-Beam™ Machine - Plate Maker
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
Build Author Sonny Lowe Views 677
The MakerSL Customized OB Minimill
This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.
Build Author Sonny Lowe Views 793
MakerSL MSL-21 OB Minimill Enclosure
Simple enclosure for the OB Minimill
Build Author Yeo Chun Beng Views 660
First CNC Build
Building my First CNC for PCB milling. Some modification done to the original build from OpenBuild Bundle.
Build Author Mark Carew Views 11845
This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!
Build Author Beam Views 807
DIY Flywheel Camera Slider
My take on a non affordable slider.
Build Author Bud Griffin Views 1459
BF3D OX (Big Freakin' 3D OX)
This is my latest printer build. The second printer I've built using V-Slot.
Build Author Anthony Bolgar Views 792
MiniMill - A must have machine :)
The new MiniMill from Mark and Sonny is a great little machine.
Build Author Kyo Views 47620
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
Build Author Limine3D Views 3225
A cartesian build with a build dimension of 200x200x750mm. I will be using a dual extruder, heated build plate, and a screw drive for the z axis.
Build Author Tomas F Uribe Views 1987
2 1/2 axis CNC chassis. Convertible to plasma, 3D printer and welder. Currently used as router. Plotting table dim: X axis 620 mm, Y 650 mm, Z 100 mm. Created for teaching purposes, open source license, currently used for engraving ukiyo-e wood plates and printmaking
Build Author Indieflow Views 54208
A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.
Build Author Adam Filipowicz Views 2514
CNC Based on CBeam, with No custom Plates, and Z GANTRY
Build Author Chris Anderson Views 10712
Openbuilds Co2 80w Laser Cutter
Co2 80 watt openbuilds laser cutter, 1200mm laser tube, 1500x1000x500mm dimensions. Build frame first and then panels to be added.
Build Author Greg Lampman Views 3392
C-Beam Intro to CNC
Build log for my first CNC machine, a C-Beam Plate Maker
Build Author Rich Bowen Views 1568
WannaBe CNC - First time design and build
Design Change - Version 2.0 has a smaller foot print, custom gantry supports, and front and back covers. I will use standard V-Slot for gantry supports leaving me enough travel to manufacture the customer supports with this machine when completed. then update to final build. I also plan to install the controller into the front cover and power supply into the back cover. Should be nice and tidy.
Build Author J-Wahl Dezign Views 2886
1.4 meter tall build height, 300x410mm build plate cartesian
The original plan was to build a 3d printer with a 1200x1200 build platform with a 600mm build height. I was having issues getting ahold of a large enough borosilicate glass plate for the build so I decided to go for build height. I plan on using a smoothieboard for the controller. The build has currently slowed down. I was removing a broken drillbit from the linear rail mount, and it shattered and took out my eye. I am doing what I can when I can focus my eyes long enough for the build.
Build Author Eric Kiser Views 3945
Live D-bot build at MRRF 2017 (Mar 25-26)
I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.
Build Author Lumberjack Engineering Views 4814
SOLAC: Space Optimized LAser Cutter
The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.
Build Author Anthony Bolgar Views 6385
L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes
This build is for a testing rig to use while testing out different controller boards and CAM software for milling and routing. It is in the early stages, planning is complete, parts are ordered. Awaiting parts delivery to start build. Please not the BOM only covers parts from the OpenBuilds part store. I will be posting the other required items very shortly.
Build Author inhan Views 14307
openbuilds rovo c-beam (700*1000)(1000*1000)한국오픈빌드.
Open the build will create open and sharing. 오픈빌드는 만들고 오픈하고 공유합니다.
Build Author chenderson Views 3705
CRH C-BEAM Router, steel capable
C-beam based CNC router using mostly openbuilds parts.
Build Author Linkreincarnate Views 939
I have parts that are apparently not suited to a cnc router or a 3d printer. I am still trying to figure out what to make out of what I have,
Build Author beardyblair Views 10952
My build log of an adapted Sphinx design with additional height and a larger X and Y axis.
Build Author signzonepr Views 5111
HD c Beam CNC Router
24x32 Cnc Router, I used vSlot c Beam Extrusion and Wheels!
Build Author Hytech2k Views 25756
Triple Shot R-P-M Area 51 CNC Parts
We wanted to create a rapid prototyping machine with excellent 3D printing, laser cutting and engraving, and light CNC router work capabilities.
Build Author dodgenet Views 1853
Budget 1500mm OpenBuilds V-Slot Deltabot Build
This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.
Build Author Ronald van Arkel Views 8766
Upgrading the C-Beam machine
So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.
Build Author Savvas Views 8005
C-Beam Lead Screw CNC Mountain
I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.
Build Author mikethebomber Views 4572
A humble first time attempt at building a 3d printer from scratch
Build Author FatGut Views 1078
MY experience as a first time introduction to the CNC world!
Build Author James Hayes Views 2570
Pure Cbeam 900x1000
This is a pure cbeam build to maximize envelope and rigidity. All the parts used are available from open builds.
Build Author Jen Views 4164
My first OX build
This is the story of my experience building a 1000 x 750mm OOZNest OX CNC router
Build Author john A Views 1555
Cartesian CNC router
This project has been a steep learning curve in an unfamiliar area for me. It has been a very rewarding experience and has opened up so many more possibilities to pursue in the future.
Build Author Sonny Lowe Views 3168
MakerSL MSL-8 OB Vise
Small Machining Vise designed around 20x80 Openbuilds Rail System
Build Author kev20009 Views 2227
MY NEW CNC
This build is not based on the ox, but got my ideas and inspiration from my first build,
Build Author Martin Bogomolni Views 5620
Delta-Six ( Jerry426 variant )
Building a Delta-6 variant, using recycled parts from a WolfStock Delta printer.
Build Author crnrstndes Views 2199
My first CNC - The C-Beam Basic
I am a newbie and this is my first build. After hours and hours of research I decided on the C-Beam. I will be changing one or two things but I will basically be building this as per Mark's video.
Build Author semperfikurt Views 11881
Beefed-up and customized OX build
My Machine is based on the OX CNC designed by Mark Carew as well as the ooznest kit, and it incorporates a bunch of my own details and revisions to increase performance and robustness. It has become way more beastly than I originally planned!
Build Author Dave420 Views 4599
10 x 5 ft plazma table build
Attaching V Slot or mutable V Slot end on end to a larger steel frame table.
Build Author Mark Carew Views 27795
V-Slot™ Nema 23 Linear Actuator Build (Lead Screw)
Learn to build a super strong nema 23 lead driven linear actuator
Build Author Headlodius Views 1861
My 1st C-Beam Router
Pretty happy with the build, had some difficulty with the software loading up the settings due to me using the wrong com.
Build Author Bridge Port Views 2729
CNC Line Boring Machine
This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.
Build Author evilc66 Views 8408
My C-Beam 3D Printer
Larger format FDM printer using C-Beam linear stages
Build Author Ryan Lock Views 72127
Ooznest OX CNC Machine
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
Build Author James Archer Views 4903
Archer - An extendable all metal 3D printer
This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.
Build Author Sonny Lowe Views 12360
MakerSL MSL-5 Cantilevered 3D Printer
This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.
Build Author Tim Pierce Views 4995
Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)
This project shows how to use Openbuilds Vv slot extrusions and wheels to retrofit a Lulzbot Taz 4 or 5 printer. These modifications improve layer consistency, eliminate nozzle and bed sag, and allow for larger toolhead mounting. Project updates and newer accessory files may be located at http://www.thingiverse.com/piercet/designs
Build Author UltiBots Views 5331
Machined Aluminum MagBall Carriages
Machined Aluminum MagBall Carriages
Build Author alan richard Views 8685
An enclosed cube shaped 3D printer using CoreXY motion. Fabricated from V slot extrusion, standard extrusion, aluminium plate and acrylic sheet using basic workshop tools. Using standard RAMPS/ Reprap electronics. Technically a 'Repstrap' currently used to build a true 'Reprap'
Build Author cbordeleau Views 4648
OpenBuilds C-Beam Double Slider
This slider uses an 500mm OpenBuilds C-beam and the design is such that the effective length of the slider is slightly less then twice the length of the C-Beam. It can be used both motorized or not.
Build Author elvisbot Views 1564
Plate 'o CBEAM
I'm starting with the c-beam bundle, and I hope to end up with a pretty useful little platemaker/shallow relief carver. I'm hoping to discover how accurate and efficient it can be.
Build Author cbordeleau Views 2252
Slider Levelling Platform
3d printed V-Slot Gantry Plate leveler.
Build Author Sonny Lowe Views 2313
MakerSL MSL-7 Laser Cut Tape Dispenser
An easy simple Tape Dispenser, spawned out of necessity, and shared for the fun of it...
Build Author gavspav Views 3968
Ooznest build - 1500mm x 1000mm
Its the first build for me so its just the story of me attempting to build the kit and hopefully end up with something I can use. Hopefully without destroying anything or anyone.
Build Author ACASTELLINI Views 3966
1500 x 1500 mm OpenBuild CNC
1500 x 1500 mm OpenBuild CNC
Build Author evil2002usna Views 4831
Cheap Ballscrew Ox CNC Router.
Build Author Dave Ashley Views 5222
My Second CNC
In short...this was a fun project.
Build Author Dave Ashley Views 4424
Sketchup Design of a PVC CNC I Intend to build.
Build Start to begin Feb 1st.
Build Author Mark Carew Views 642841
OpenBuilds OX CNC Machine
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
Build Author Peter Oakes Views 19129
The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build
I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.
Build Author azarock Views 4130
Square shaped OX for doing general purpose engraving and cutting into wood, acrylic, and aluminum.
Build Author zann68 Views 4102
OX CNC 4'x4'
Out with the Old in with the New. Trying to build a nice clean setup that myself and my sons can use and enjoy.
Build Author jjcolletta Views 5165
Voxel OX Based Build
Building upon the great work done by Marshall Peck and others. I have started a new build.
Build Author Wakez Views 3086
I'm starting my first own build cnc machine which is inspired by routy and the ox. Were my goal was not to use the ox plates but use the standard plates available in the parts store for the design.
Build Author Gary Bonard Views 3107
The Ox That Wood
This is my story about my need for a CNC router on a budget that wound up in the $5K range !!! but I have a good belt drive Ox
Build Author Steve B Views 10784
OX PPR - Portable Plasma/Router
PPR = Portable Plasma/Router. A ~30x30"work area with leadscrews. Work surface is below support members. Can be placed ONTO cutting surface.
Build Author AlexLee Views 7007
In Greek mythology, Talos (/ˈteɪlɒs/; Greek: Τάλως, Talōs) was a giant man of bronze made by Hephaestus (the Greek god of fire, metalworking, craftsmen and blacksmiths) who protected Europa in Crete from pirates and invaders. He circled the island's shores three times daily.
Build Author Keith Davis Views 11830
Combines the layout factor of a CoreXY while using Cartesian logic. The design has a fixed build plate - moving an X/Y frame on the Z axis enclosed by an outer main frame.
Build Author JakeWyman Views 2836
C-Beam on X, Y and Z Attempting to use internal channel first go around
C-Beam build using the small C-Beam gantry plates only.
Build Author evildean Views 6172
OX-SUMO, SUMO-OX, OXSUMO?
One meter square. Short and stout.... reminds me of a Sumo Wrestler. A temporary and adjustable configuration I have devised to cut my own plates. I have kicked around ideas for about a year and the C-Beam extrusion has made this attempt to realize my ideas irresistible. This is just one step towards bigger and better things!
Build Author Kaarbble Views 6937
Kaarbble Nylon Bot
We plan experiment on nylon 3 D printing;
Build Author Mark Carew Views 4364
Work Bench Stand
Here is a nice little simple build that will help to free up some extra space on your work bench. If your like me you need all the room on your work station you can use, so this is great to have.
Build Author winand Views 9566
YAOP (Yet Another Openbuilds Printer)
Yet Another Openbuilds Printer, my version :-P
Build Author Sam Dobbie Views 3715
A fully aluminium printer made from off the shelf components, no printed parts.
Build Author KBill Views 8584
MIY OLY Delta Printer
Mag arm deltabot with laser cut carriages and connectors.
Build Author Mark Carew Views 47906
C-Beam™ Linear Actuator Build
Here are a few helpful C-Beam actuator ideas that will help you get a start on your builds
Build Author Mark Carew Views 42711
X Y Table OpenRail / V-Slot Build Examples
The X/Y table system is a great starting point for many CNC projects giving you the ability to move an object on the X and Y axis in a simple compact style.
Build Author Ronald van Arkel Views 25147
Routy GT2 290 BSX CNC Router, Low Cost and Good!
The Routy GT2 300 BSX CNC Router is a Low Cost CNC build. It performs the same as the larger Routy's from OpenBuilds but doesn't break the bank!
Build Author Mark Carew Views 33524
V-Slot™ X -Y Stage Hidden Acme Rod Example
An X-Y Stage created from two self contained acme screw linear actuators. This build was published as an example of how many of the OpenBuilds Parts can be used.
Build Author Mark Carew Views 39247
V-Slot™ Belt & Pinion Example Build
The OpenBuilds team has redefined the belt and pinion concept. By using standard OpenBuild components were able to improve on this system in ways that will save on cost and enhance its engineering capabilities.
Build Author inhan Views 12329
Openbuilds rovo laser mini(오픈빌드)
laser mini 20 * 40 OPENBUILDS base frame.(크기 412x455mm) laser mini 20*40 기본프레임입니다. 기존 여러부품을 사용한 제품보다 부품수를 줄이면서 최소한의 단가를 뽑을려고 디자인했습니다.. 기존대비 부품수 절반에 단가도 절반을 줄이면서 최적의성능을 내려합니다.
Build Author Keith Davis Views 10655
A Prusa i3 design running on Open Build's mini V wheels
Build Author Justin Butler Views 3713
My Belt & Pinion Drive CNC Router
My CNC Router design and inspiration came from the Routy CNC project. I modified some of the aspects of the Routy build, but left the original XY dimensions intact. The build has been very enjoyable thus far and am nearing completion of all wiring in preparation for my first test run!
Build Author motopreserve Views 6139
Persnickety Plate Maker
My very first attempt at a CNC build. Based on the OpenBuilds C-Beam Machine, small tweaks will be made to tailor it for my goals: machining G10, aluminum & some carbon fiber for use with multirotor and motorcycle parts. I am looking forward to the day when I am comfortable enough to bring the ideas in my head to the tip of the end mill in a smooth fashion...
Build Author Iwan Müller Views 11626
CNC Router (Non OX)
My own Design (not an OX Derivative) using standard Parts.
Build Author inhan Views 3297
openbuilds rovo 1000mmx1000mm(rovo x)(korea)
Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.
Build Author Ronald van Arkel Views 10536
Routy GT2 300 BSX CNC Router
This is the first project that I would like to share with you. I know the build looks familiar and it is; it’s based on kram242´s Routy. Work area is 300*500*55 mm and is NEMA17/GT2 belt driven.
Build Author Darren Ditto Views 6665
V 1.4 - Bright Box Cartesian Printer - *BUILD PROGRESS PICTURES
Cartesian Printer, 200mm x 200mm x 380mm build area, enclosed, belt and pinion movement, heated bed, Raspberry Pi, Pi Cam, OctoPrint
Build Author John foale Views 9717
Guitar shop CNC
Great bit of kit time will tell if it is up to the job
Build Author nidal Views 8606
Simple cartesian style CNC. Uses ACME screws for all 3 axes, 20x40 v-slots and should have 50cm x 50cm x 50cm work volume.
Build Author BismarckDon Views 3291
Custom OX Build
Inspired by the original OX by Mark Carew, this is my Custom OX. Many small changes, additions, and upgrades. Build is in progress and this post will be updated regularly with photos. Enjoy!
Build Author TomH Views 10092
H-Bot CoreXY Cube with Fixed Build Plate
Use of V-Slot for frame and rails with option to use identical 500mm uncut lengths: 8 * 20x60 x 500mm 8 * 20x40 x 500mm 7 * 20x20 x 500mm (2 cut into four identical 125mm pieces for filament holders) Use of uncut 500mm rails obtained through use of 12 joining plates for use as spacers. Alternate approach is to trim two 20x40 and 1 20x20 rail by 6-8mm each. Build volume ~400mm cubed (with dual extruders). Use of only openbuilds components! Currently in design phase...
Build Author nlfawcett Views 8423
Longhorn OX (Under Construction and In Progress)
I ran across the OX and knew it was the one I wanted to build. Some of the things I wanted to include was make it bigger and a little more solid than what the original plans called for. So here is where I am at so far. It will have a cutting area of 48" x 48". The waste board support frame will have more support rails. The Y axis will have (3) 20mm x 60mm rails instead of the original (2) that is called for. 1/4" aluminum OX plates. And a few more odds and ends.
Build Author Hytech2k Views 3991
Micro Ox 2 x 2
Micro Ox Build
Build Author SvenderMeister Views 4128
This is a cnc router with 3 axis and a kress 1050 motor. Its 140x120cm and a homebuild with your help!
Build Author Chris Anderson Views 6998
An OX build - little large than specs and plates 3D printed
Build Author M^3 Views 12938
M Cubed CNC Mill
A no-nonsense CNC mini mill to get the job done.
Build Author inhan Views 7926
OPENBUILDS Korea (ROVO 1000)
I am very grateful to Mark Carew with passion and imagination. Therefore, the machine is good, but making the website there too daedanhaeseo The end of the same either way to invisible homework. Thank you for allowing openbuilds team submitted to the challenge once again for those with a passion that I feel like in Korea, I want to be a great help.