Select a Category
Build Author mikethebomber Views 2470
A humble first time attempt at building a 3d printer from scratch
Build Author Troy Proffitt Views 4609
Double D-Bot 400mm x 400mm x 600mm
Based on D-Bot but used more metal bracing / openbuild plates instead of plastic parts. Also size was increased.
Build Author Eric Kiser Views 975
Live D-bot build at MRRF 2017 (Mar 25-26)
I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.
Build Author Carl Feniak Views 147530
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
Build Author techmod Views 2518
This is going to be a more or less detailed how to build BetterBot. Pictures and more (decent) text are to be added.
Build Author dodgenet Views 867
Budget 1500mm OpenBuilds V-Slot Deltabot Build
This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.
Build Author Keith Davis Views 10875
A quiet, 8inx8in build area, Cartesian printer with permanently level bed. This is a compact, solid, inexpensive printer that will reliably print any type filament for thousands of hours while you sleep, fish, or play ball in the park.
Build Author kallibaba Views 583
Linear Rail for Dobot Magician
This is a simpel build of a Linear rail for the Dobot Magician.
Build Author Giarc Views 1739
Another slight variation of Niko's Eggbot using Openbuilds V-slot and other 3d printed parts.
Build Author Venturebit Views 667
SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer
The whole system is powered by 12V / DC power. Process it into Pellets or Granules to use it with your 3D Printer or Filament Extruder. Our self-developed steppermotor Controls allows you to optimally adjust Feedrate for your Situation. Forward, Backward and Stop is integrated for easy operation. The Speed can be continuously regulated via rotary switch.
Build Author adamcooks Views 26716
Based on the work of Carl Feniak and his C-Bot. A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy. Utilizing a 300x300 build plate this derivation utilizes three lead screws, synced to a single motor via gt2 belt
Build Author Jose A. Molina Views 2216
Remote Controlled Robot Spider(Teaching Tool)
This Project is meant to teach introductory robotics and arduino styled micro-controllers to HS and MS students.
Build Author Power Playground Views 904
This is my own modified version of the D-Bot printer. I wanted to spec this printer to be able to print exotic materials at high accuracy with little to no compromises and maximum reliability.
Build Author kallibaba Views 2266
XY base for play with GRBL and vvvv
GRBL, vvvv, drawbot, penchanger, custom plates
Build Author Tim Pierce Views 3235
Openbuilds V slot Rail extrusion retrofits for Lulzbot 4/5 Taz Printers (X, Y and Z axis)
This project shows how to use Openbuilds Vv slot extrusions and wheels to retrofit a Lulzbot Taz 4 or 5 printer. These modifications improve layer consistency, eliminate nozzle and bed sag, and allow for larger toolhead mounting. Project updates and newer accessory files may be located at http://www.thingiverse.com/piercet/designs
Build Author Kaarbble Views 6360
Kaarbble Nylon Bot
We plan experiment on nylon 3 D printing;
Build Author MikeBardsley Views 2432
Fast, Large build area, CoreXY design
Build Author runninfarmer Views 6947
Build Author mrtinkerer Views 8890
V-slot and MDF DeltaBot
This is a deltabot 3D printer build using CNC routed MDF and v-slot rails. Full description found in instructables.com.
Build Author Keith Davis Views 3815
This is a simple, yet rugged design, weighing only 6 lbs and with 13x13x14" volume with a 8x8x6" build area. While assembly is pretty simple, the small size and rigidity of the design make shipping assembled printers attractive.
Build Author sergeysapiro78 Views 1234
Zen3D Atlantis 3D printer, H-Bot mechanics
H-Bot mechanics 3D printer. Build volume - 300x300x300mm dimensions: 560x500x500mm
Build Author Bon Thomassen Views 3542
D-Bot CoreXY printer
A CoreXY D-Bot 3d printer using gantries as wheel-carriages.
Build Author runninfarmer Views 7342
A minimum parts build with belt driven Z-axis.
Build Author UltiBots Views 4057
Machined Aluminum MagBall Carriages
Machined Aluminum MagBall Carriages
Build Author Sheepdog Views 17422
Griffin Delta Printer
Designed from the ground up as a low cost, highly scalable delta printer. This printer has been built as small as carry on luggage size, up to an 18in wide print surface and is capable of larger. Approximate cost is low to mid $500 range start to finish, including electronics for a basic model.
Build Author Midgetmountain Views 11509
The aim of this OpenBot build, was to make a 3d Printer that was easy to build with minimal tools and using of the shelve parts from Openbuilds.
Build Author UltiBots Views 6733
Metal MagBall Carriage
UltiBots LLC designs and packages DeltaBot 3D printers using quality components. Our kits are V-Slot based. Print results are impressive. The Metal MagBall Carriage was designed to be ridged, compact, and simple.
Build Author eddiejr Views 2104
Eddie's Build of Niko's (gianakop) Egg Painter
This is my build of Niko's (gianakop) Egg Painter. Egg decorating is something many Christians do for Easter Sunday and the Easter (Paschal) Season that follows. This will be my initial use for the build, but also with minimal modification to be able to write/paint on other round objects like Christmas ornaments, coffee mugs, etc. Many people also decorate eggs for purely secular reasons.
Build Author blindflight Views 2318
After seeing different egg bots designs, I decided to incorporate my own design.
Build Author gianakop Views 17647
Niko’s Egg-painter robot (OpenBuilds)
This EggBot design has a perfect functionality (the same as the original EggBot professional), a perfect cable and microcontroller arrangement, and a perfect cost as it uses a minimum list of parts (with one V-Slot Linear Rail size20mm x 80mm and length 500mm you can build 3 EggBots!)
Build Author Mark Carew Views 28556
This SphereBot is based on the EggBot which is an open-source art robot (drawbot) that can draw on spherical or egg-shaped objects.
Build Author mirage335 Views 2893
Portable, high-speed, low-cost advanced multi-tool desktop factory derived from LulzBot Taz and TazMega.
Build Author JCPhlux Views 7449
Large Core XY 3d Printer W/fixed build plate
Build Author TomH Views 9412
H-Bot CoreXY Cube with Fixed Build Plate
Use of V-Slot for frame and rails with option to use identical 500mm uncut lengths: 8 * 20x60 x 500mm 8 * 20x40 x 500mm 7 * 20x20 x 500mm (2 cut into four identical 125mm pieces for filament holders) Use of uncut 500mm rails obtained through use of 12 joining plates for use as spacers. Alternate approach is to trim two 20x40 and 1 20x20 rail by 6-8mm each. Build volume ~400mm cubed (with dual extruders). Use of only openbuilds components! Currently in design phase...
Build Author Arunkumar Views 2922
Polar Bot which used to depress buttons
Build Author UltiBots Views 11858
Kossel 250 V-Slot
This build is very straight forward. The design is simple. There is a great support community for Delta 3D printers.
Build Author Filipe Jose Views 11501
The name of the printer is G&C Printer from Good & Cheap Printer. My goal was to design an printer that was good print quality and was cheap. The total cost of the printer is about 490€.
Build Author mirage335 Views 3993
Mega-sized Taz machine. Supports many tools (extrusion, laser, mill, etc) simultaneously.
Build Author KBill Views 7925
MIY OLY Delta Printer
Mag arm deltabot with laser cut carriages and connectors.
Build Author Giuliano M Views 24305
H-Bot CoreXY Cube
H-Bot with CoreXY movement, above-rail gantry and a large 400x400x400mm build volume.
Build Author Ulnad Views 7182
Delta Bot: Improved DIY 3D Printer
Build the efficient and reliable all metal structure 3D Printer. Improved significantly with new concepts for printers. Great quality and up to 400 mm/s print speed (very fast). Built with heated bed, hybrid bowden suspended extruder, and counterweight (tested printing 21 hours straight with no motors hot). Optional smart controller for computerless printing. Print any kind of thermoplastic.
Build Author nidal Views 8095
Simple cartesian style CNC. Uses ACME screws for all 3 axes, 20x40 v-slots and should have 50cm x 50cm x 50cm work volume.
Build Author pdesigns Views 10747
This is a work in progress 3D printer Dimensions are 230x230x340mm height. Print dimensions are: 135x135x160mm. Prototype has a bowden extruder with a J-head hotend. Assembly instructions: http://reprapstyle.blogspot.pt
Build Author Anglesachse Views 10652
My version of the Mug Plotter designed by Teed http://edinburghhacklab.com/ . Also used the Eibotboard from the original eggbot from evilmadscientists http://shop.evilmadscientist.com/partsmenu/188-ebb A huge thanks to Hexitex for his brilliant Four jaw chuck http://www.thingiverse.com/thing:5791
Build Author violan Views 4083
3D Printer DELTA
Delta printer, Bed size 280 cm dimeter Print Height 300 cm not tested yet the speed
Build Author Josh Mascote Views 3913
Z3D Delta Printer
Berrybot inspired delta 3d printer with a few other tweaks and modifications.
Build Author Mohsen Abbasi Views 1714
For all other builders and robotic technies!