Select a Category
Build Author Schematix Views 65803
OX-Metal CNC Router Mill
The OX-Metal is based on the original OX CNC mill But with a few modifications and add-ons
Build Author Sage Views 57992
Super rigid Delta printer, using 20X40 V-Slot
Build Author sgspenceley Views 53890
Linear Rail CNC Machines
A CNC build using linear rails & lead screws.
Build Author Martin.Barfoed Views 48671
Large format 1200X1500mm OX Build using Stainless Steel plates, dual belt configuration. Limit switches is a mix of micro switches and NPN Proximity switches. Electronics based on parallel break out board, Long Motor Stepper drivers (Chinese stuff) and motors controlled by Mach3. Spindel will be Kress 1050.
Build Author mytechno3d Views 47774
Maximus 3D Printer
A full scalable 3D Printer , with a big printing area. Build with openbuild parts from www.vslot-europe.com
Build Author Robert Hummel Views 44258
This will be an Aluminum OX build. Plates and all design credit goes to Mark from open builds. I may add my own touches but mainly this is to see how Aluminum plates perform
Build Author Tweakie Views 36689
Here it is my intention to show what was involved in adding a CO2 laser to my existing CNC machine.
Build Author oni305 Views 34735
Laser Engraver Control Board + Inkscape extension
This is a PCB designed to control a laser Engraver CNC
Build Author sausagePaws Views 34037
Embroidery machine with XY belt and pinion drive.
A simple Embroidery machine using an XY belt and pinion drive to drive a hoop under a standard sewing machine. Needle timing, machine power and stepper control are all provided by a PIC processor. A tablet provides the higher level formatting required for communicating with the PIC chip.
Build Author adamcooks Views 30162
Based on the work of Carl Feniak and his C-Bot. A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy. Utilizing a 300x300 build plate this derivation utilizes three lead screws, synced to a single motor via gt2 belt
Build Author Giuliano M Views 29640
H-Bot CoreXY Cube
Build Author dougsnash Views 27973
Rotary Axis OX Derivitive
A Rotary Axis CNC router based on the OX CNC Router
Build Author ymilord Views 26105
FARM OX (Four Axis Rotary Machine)
Four Axis Rotary Machine (FARM) OX. Equipped with a X,Z,A & C Axis.
Build Author Justinat Views 25224
Mini lathe CNC Conversion - Work in progress
My on going build of CNC Mini Lathe
Build Author Adam Filipowicz Views 22279
TITAN-XY (Fixed Build Plate, Quad Z Screw, CoreXY)
Super Rigid CoreXY 3D Printer
Build Author Robert Bailey Views 22155
FRANKINATOR -- My CNC Router Built Around The C-Beam Rail
I started this build about 2 weeks after the c-beam hit the store. I purchased a single bundle and ordered a TinyG to run it. where I work I have Hardware, Software and Mechanical engineers and they all got sucked into my project. they want one to do prototyping at the office, once they see mine...
Build Author UltiBots Views 22069
Mini Kossel V-Slot 3D Printer
This build is very straight forward. The design is simple. There is a great support community for Delta 3D printers.
Build Author openhardwarecoza Views 21415
Plasma cutter - 608 on steel tube version
CNC Plasma cutter: 608ZZ on steel square tube linear rollers Welded frame HDT2-15 Belt Drive Tradeweld Cut-40 Plasma cutter with converted hand torch Virtual Torch Height Control through inductive probing - open source electronics project
Build Author Giarc Views 20171
Lead Screw Driven Ox Derivative (850x1500)
Another build based on the original OX design with a cutting area will be about 26" (680mm) x 50" (1300mm) and driven by lead screws.
Build Author runninfarmer Views 19902
Build Author Peter Oakes Views 19778
The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build
I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.
Build Author openhardwarecoza Views 19576
openBuilds FreeBURN-2-Mini V-slot CO2 Laser (40-50w)
A new mini version of the http://openbuilds.com/builds/openbuilds-freeburn-1-v-slot-co2-laser-60-100w.1001/ FreeBurn CO2 Lasercutter
Build Author Keith Davis Views 19456
A compact, enclosed Core XY design, based on off-the-shelf parts.
Build Author Tweakie Views 19343
Software speed control of a brushless dc (Bldc) motor from Mach3.
Although this build is typically Mach3 related there is no reason it cannot be adapted for use with any machine control software which provides a PWM spindle control output. As an addition, an option has now been added which will enable the interface to manually control outrunner speed without the need for a PWM signal.
Build Author Brian Slee Views 18849
Ultimo is the ultimate multi tool for the person who's serious about prototyping new ideas. A Delta Robot frame supports 3d printing up to 450mm in diameter, a powerful CNC Mill, and 50 amp plasma cutter for processing steel plate. And that's just a start.....wait till you see some of the other attachments we are currently working on incorporating.
Build Author Robert Hummel Views 18527
Stinger V Micro Mill
While building my OX AI I found myself with left over v slot and thought to myself, what do I need that I can build using them? Well since I make a lot of my own PCB boards for projects I figured a micro PCB mill would fit the bill ;) With inspiration from the OX and OX AI I give you the Stinger V :)
Build Author Mark Carew Views 18052
V-Slot Miter Saw Stop
A quick and simple saw stop build.
Build Author Steven Bloom Views 18007
This is my first CNC build. The Sea-OX is a machine built out of three 1000mm C-Beams. I plan to have a Y length of 1000mm and a X length of 650mm. The Z should have the ability to move approximately 100mm.
Build Author evilc66 Views 17386
LCD Based SLA Resin Printer
SLA resin printer based on a gen3/4 iPad Retina display. The design intent is to create a printer with the highest resolution possible with a lower cost of entry compared to DLP projector based SLA printers.
Build Author JOSH.PIERCE Views 17150
CoreXY W/ Fixed Build Plate & Enclosure
Building a Core XY printer with a fixed build plate from off the shelf parts.
Build Author mytechno3d Views 17133
A low cost and easy to build laser cutter based on 2.8w laser diode .
Build Author Hackscribble Views 15987
1000mm x 750mm OX with some planned enhancements. My first venture into CNC.
Build Author Steven Bloom Views 15527
BAFP 3D Printer
A New Core XY Printer build. BAFP stands for Big And Fast Printer. It will be awesome !!
Build Author DazTheGas Views 14719
Been using the Ox now since 2015, so decided I should move on to C-Beam :-)
Build Author Mark Carew Views 13617
This OpenBuilds Mini Mill is a great go-to desktop sized CNC milling plate / part maker and 3D carving machine!
Build Author DazTheGas Views 13406
From where Mark left off from the Ox build I am going to film the whole process of customizing the Ox.
Build Author Johnnycatt Views 13299
Lathe 4" x 40"
This is a lathe. I do not plan on making parts for NASA, but I want to be able to turn, face and bore things like wood, brass, aluminum and plastics.
Build Author James Gao Views 13252
An OX-inspired mini desktop mill. Designed in OpenSCAD, these parts are fully parametric and can be customized to your liking.
Build Author gwandad Views 13177
OX TWO in ONE
What I'm doing is pretty self explanatory. I've put a few pictures up
Build Author M^3 Views 13135
M Cubed CNC Mill
A no-nonsense CNC mini mill to get the job done.
Build Author UltiBots Views 12833
Kossel 250 V-Slot
This build is very straight forward. The design is simple. There is a great support community for Delta 3D printers.
Build Author Sonny Lowe Views 12833
MakerSL MSL-5 Cantilevered 3D Printer
This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.
Build Author Kyo Views 12794
This is Adamantine, a all aluminum lead screw driven 3d printer. I wanted to have a printer that would not be effected by the heat or humidity I have here as my current wood frame printer is.
Build Author Mohammed Iskandarani Views 12651
CO2 60 -130 WATT LASER ENGRAVING/CUTTING CNC WITH DSP AWC608 CONTROLLER
LASER ENGRAVING DIY 60 WATT
Build Author cameron Views 12608
As a 3rd year mechatronic engineer with a plan to print my 4th year thesis project and with no elegant backup plan, I ran into a problem, I'm gonna need a bigger printer. Loving the DeltaPrintr kickstarter, but needing it before the end of next year I have resolved to make my own.
Build Author Midgetmountain Views 12488
The aim of this OpenBot build, was to make a 3d Printer that was easy to build with minimal tools and using of the shelve parts from Openbuilds.
Build Author cureac Views 12475
Homemade plasma cnc
Build Author Kermareg Views 12474
[EN] Build of my Multiple OX CNC. It's goal is to run in 2 differents modes : router and 3D printer modes. The router mode will allows the use of a laser diode or a standard spindle. [FR] Construction d'une CNC basée sur l'OX pour des usages multiples. Deux modes principaux sont prévus : l'impression 3D et l'usinage via une defonceuses. Le mode usinage permettra à l'avenir de placerune tête laser pour effectuer quelques gravures simples. Une version française : http://kermareg.be/?page_id=103
Build Author Frank Steinhauer Views 12441
Design of a multifunctional CNC machine.
Build Author diego benavente Views 12233
kukatype 3d printer open source
im just starting and the size of this is 1.5 meter from base to end
Build Author dcorb Views 12147
Steel Frame CNC Router
A scratch built steel frame CNC Router.
Build Author Slewratesarego Views 12114
The RAT. A form ply and aluminium hybrid.
A hybrid of form ply and aluminium. 835x1260x100mm working envelope.
Build Author CubeSpawn Views 12108
CubeSpawn Ultimaker 3D Printer Module
This 3D printer is an implementation of the Ultimaker 3D printer Using the Modular approach, many of the parts from the CubeSpawn 3 axis mill translate straight across into this design, so adding new concepts should go quicker
Build Author Keith Davis Views 12085
Combines the layout factor of a CoreXY while using Cartesian logic. The design has a fixed build plate - moving an X/Y frame on the Z axis enclosed by an outer main frame.
Build Author Chris Anderson Views 11749
Openbuilds Co2 80w Laser Cutter
Co2 80 watt openbuilds laser cutter, 1200mm laser tube, 1500x1000x500mm dimensions. Build frame first and then panels to be added.
Build Author Motions Views 11673
Screaming Ox CNC Machine
Big brother of the Charging Ox CNC machine.
Build Author shauki Views 11488
Black Panther QR
The QuadRap 3D printer version based on OpenBuilds wheels. Born in https://plus.google.com/u/0/communities/103539262895202172380
Build Author dcorb Views 11473
3D Turn Table Scanner
My attempt at a 3D scanner. Still trying to convince myself it will work.
Build Author UltiBots Views 11457
UltiBots CB3030 CNC Router
The UltiBots CB3030 CNC uses C-Beam, V-Slot and an extruded aluminum T-Slot work table. This allows 6mm T-Nuts, step clamps and blocks to secure materials to the work surface. The all metal design makes the use of a mister possible.
Build Author Brian Views 11341
Cubic 3D Printer
I've made a 3D printer
Build Author Steve hope Views 11259
8x4 CNC build
Routy cnc upgrade.
Build Author ahayden Views 11226
C-Beam Prefab Untitled
The C-Beam Prefab Untitled is designed as the cartesian compliment to the C-Beam XL. With the exception of requiring a couple more 1000mm C-Beams and lead screws, the build requires a minimum of additional parts. The primary intention of the build is to maximize the cutting envelope while still staying within the sweet spot for C-beam rigidity. This design can easily be modified and allows for further custom structural components to be cut with the initial build platform.
Build Author MechEng Views 11137
Generic Rigid 3D Printer (Currently on 1st Revision!)
Rigid 3d printer with more than enough room for dual extruders. Easily expandable platform.
Build Author Steve B Views 10880
OX PPR - Portable Plasma/Router
PPR = Portable Plasma/Router. A ~30x30"work area with leadscrews. Work surface is below support members. Can be placed ONTO cutting surface.
Build Author JCPhlux Views 10875
Large 1500x1000 Laser V
I am building a Laser cutter based off Robert Hummel's Laser V design.
Build Author Keith Davis Views 10754
A Prusa i3 design running on Open Build's mini V wheels
Build Author John Mueller Views 10717
Small Mill type CNC machine, using C-Beams and V-Slot rail, bundle packs as a starter point. I needed a smallish desktop machine to fit a pretty narrow use case for my business, but the machine itself has larger applications to the OB community. Currently I will run the Dewalt 611 router on the Z axis, but have plans to add in a brushless RC style motor. So this design does have room to go either way easily.
Build Author Max Tepermeister Views 10662
A dual extrusion CoreXY printer with a 290 X 290mm build volume built entirely out of 2020 aluminum extrusion and using openbuilds mini-carriages for motion.
Build Author mytechno3d Views 10312
Maximus Evolution (Still another XL 3D Printer )
Maximus Evolution : 380mm x 400mm XL 3D Printer
Build Author Giuliano M Views 10293
OpenBuilds OX 48x48 Aluminum
Variant on the OpenBuilds OX CNC Router, enlarged with 1500mm length beams for a cutting area of 48" x 48". Based on the original model, the larger of the two, with the addition of a third 20x60 beam on the gantry for strength. Estimated cost is around $1100, minus the router.
Build Author TomH Views 10204
H-Bot CoreXY Cube with Fixed Build Plate
Use of V-Slot for frame and rails with option to use identical 500mm uncut lengths: 8 * 20x60 x 500mm 8 * 20x40 x 500mm 7 * 20x20 x 500mm (2 cut into four identical 125mm pieces for filament holders) Use of uncut 500mm rails obtained through use of 12 joining plates for use as spacers. Alternate approach is to trim two 20x40 and 1 20x20 rail by 6-8mm each. Build volume ~400mm cubed (with dual extruders). Use of only openbuilds components! Currently in design phase...
Build Author nicklogan Views 10188
A Rostock style delta bot with the parts which are typically 3D printed made from medium density fiberboard (MDF). It uses a home made hot end.
Build Author CubeSpawn Views 10186
CubeSpawn 3 Axis Mill Module
Small Form factor based 3 axis Gantry style mill, Removeable mechanical module. Removable Electronics. with a removable machine pallet, for automation.
Build Author Bmoz Views 10033
Ox with Gecko Controller and CNC Linux
This build is the documentation of someone with no experience building the OX cnc machine with a Gecko G540 controller and CNClinux
Build Author Teflon4 Views 9977
TZ C-Beam Machine Plate Maker
A Modified and augmented Ooznest C-Beam Machine Plate Maker.
Build Author dddman Views 9977
Prusa i3 (Acrylic frame with OB rods)
The Prusa i3 (iteration 3) is the newest and most current 3D Printer design by RepRap Core Developer Prusajr (source: http://reprap.org/wiki/Prusa_i3)
Build Author Ariel Yahni Views 9933
Modifying the K40 laser cuter stock gantry in favor of OpenBuilds superior and smoother movement. Also will provide me a better level control for easier beam alignment.
Build Author Said Views 9888
Here is my Project A CNC 3000 mm by 1500 mm, with a 2.2kW spindle collet ER25 and 4 stepper motor nema 23 425oz-in. The purpose being to have a large work surface for a minimum cost.
Build Author mike125 Views 9793
Cheetah 1.1 CNC Router
I hope to have a working prototype built soon.
Build Author Moag Views 9766
Moag's CNC Mill
A design in progress, to 3D carve two-part Aluminium injection moulds for Soft Plastic Lures and Lead Jigs, so I can prototype some of the concepts rattling around in my head. All Openbuilds parts where possible, 1000x500mm footprint, 0.8kw Water-cooled Spindle?, High Torque Stepper?,Smoothieboard?, I still have no idea. As a newbie to the CNC world, any wisdom would be welcome to take this from just a idea into reality so I can start playing with all this awesome stuff. Thanks in advance
Build Author Jason Moyer Views 9583
Delta 3d Printer
I am going to use this as a build log for my delta 3d printer build. I have access to a MakerBOT to print some of the parts. I am still finishing up a few of the design elements but the idea is to have a rigid unit to eliminate deflection in components and maintain accuracy.
Build Author Nugz Views 9558
Angus : A Slightly "Beefier" OX
This is where I will share my attempt at building a slightly "beefier" OpenBuilds OX CNC Machine using commonly available parts in the spirit of OPENBUILDS and Open Source in general. I have a tendancy to over-build things so I will be balancing that tendacy against budget constraints and common sense as much as possible.
Build Author David Arroyo Views 9354
Using a Raspberry Pi, Arduino and a Protoneer CNC Shield to create an Open Source CNC router controller. It will be equipped with a touch screen to control the on board processor. The touch screen will run a user interface that has buttons for added functionality. There will be a camera for monitoring progress from inside my office. The control box will also feature a way to power the vacuum and spindle/router . I will also be able to monitor room temp as well as Pi CPU temps and averages.
Build Author gwandad Views 9296
C Beam Rotary
I've used the good work of Openbuilds & expanded it to suit.
Build Author Troy Proffitt Views 9112
Double D-Bot 400mm x 400mm x 600mm
Based on D-Bot but used more metal bracing / openbuild plates instead of plastic parts. Also size was increased.
Build Author Paruk Views 9053
A 3D Scanning Station
Build Author Robert Hummel Views 9009
DIY anodizing power supply
How to make your own anodizing power supply on a budget
Build Author lenne0815 Views 9001
Hurricane - Large 80cm x 80cm x 80cm cm build space project
Huge - Fast - Affordable
Build Author Ronald van Arkel Views 8968
Upgrading the C-Beam machine
So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.
Build Author Brian Popp Views 8965
Salmon Sphinx 1.0
A tribute build based on Kyo's wonderful CBeam Sphinx. My hope is to improve on that build slightly, but to be honest, I'll probably just screw it up. I'll use this build to publicly document my failures.
Build Author Mark Carew Views 8964
Phlatprinter MKII Foam Cutting Machine
Build Author cureac Views 8929
CNC Rotary Table Rotational Axis, A Axis B Axis 4th 5th Axis CNC Dividing Head
This is my first major project.
Build Author nidal Views 8679
Simple cartesian style CNC. Uses ACME screws for all 3 axes, 20x40 v-slots and should have 50cm x 50cm x 50cm work volume.
Build Author robbell Views 8672
OX-Based Self-Contaned HVLP Spray Booth
A CNC HVLP spray booth based on OX.
Build Author evilc66 Views 8641
My C-Beam 3D Printer
Larger format FDM printer using C-Beam linear stages
Build Author Savvas Views 8585
C-Beam Lead Screw CNC Mountain
I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.
Build Author Keith Davis Views 8577
A completely belt driven cartesian design with a center mounted X motor. This is a very compact, rugged design.
Build Author JCPhlux Views 8525
Large Core XY 3d Printer W/fixed build plate
Build Author nlfawcett Views 8509
Longhorn OX (Under Construction and In Progress)
I ran across the OX and knew it was the one I wanted to build. Some of the things I wanted to include was make it bigger and a little more solid than what the original plans called for. So here is where I am at so far. It will have a cutting area of 48" x 48". The waste board support frame will have more support rails. The Y axis will have (3) 20mm x 60mm rails instead of the original (2) that is called for. 1/4" aluminum OX plates. And a few more odds and ends.