Select a Category
Build Author Mark Carew Views 652715
OpenBuilds OX CNC Machine
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
Build Author Carl Feniak Views 170626
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
Build Author Ryan Lock Views 73260
Ooznest OX CNC Machine
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
Build Author Indieflow Views 55328
A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.
Build Author Sage Views 57999
Super rigid Delta printer, using 20X40 V-Slot
Build Author Mark Carew Views 112619
C-Beam™ Machine - Plate Maker
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
Build Author sebf34 Views 12762
OX Based cnc 3000 x 1500 Double belt
OX Based CNC
Build Author Metalguru Views 2725
C-Beam XL with Aluminum Bed
C-Beam XL with v-slot aluminum bed for fixturing.
Build Author winand Views 13240
YAOR (Yet Another Openbuilds Router)
Yet Another Openbuilds Router, my version :-)
Build Author Peter Oakes Views 19821
The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build
I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.
Build Author PhotoSgt85 Views 5715
C-Beam Machine XL
Overview of my experience building the C-Beam Machine XL from OpenBuilds, along with updates as I move along and get it going. My application is for creating plates needed for lab functions, 19 rack bay covers, and whatever else arises.
Build Author Richard Long Views 5280
Solid basics CNC router
This build focuses on the basics to provide a good foundation to further enhance the ability to achieve tight tolerances
Build Author Mark Carew Views 39774
V-Slot™ Belt & Pinion Example Build
The OpenBuilds team has redefined the belt and pinion concept. By using standard OpenBuild components were able to improve on this system in ways that will save on cost and enhance its engineering capabilities.
Build Author HPB Views 13139
A simple XY laser engraver/cutter
A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.
Build Author Craig Views 5231
Inspired by the Crawlbot
Building a couple of CNC's based on the Crawlbot
Build Author Iwan Müller Views 4047
This is a machine to trim and horizontal cutting hedges.
Build Author Sonny Lowe Views 12845
MakerSL MSL-5 Cantilevered 3D Printer
This is a simple cantilevered 3D Printer. It is designed around the OB V-Slot linear rails. I am trying to simplify this as much as possible, all rails will be 250mm long and only one will require cutting (it will be cut in half). The printer will use all OB wheels and gantry plates where applicable, all other plates can be either Laser Cut or 3D Printed (files will be provided for both). I am not set on electronic as of yet, but plan to use a single control board...no Arduino/Ramps control.
Build Author Mark Carew Views 50667
V-Slot™ Mini V Linear Actuator Build
Learn to build the V-SLOT Mini V Modular linear Actuator System and create all kinds of cool machines!
Build Author Sonny Lowe Views 3297
MakerSL MSL-8 OB Vise
Small Machining Vise designed around 20x80 Openbuilds Rail System
Build Author Sheepdog Views 18633
Griffin Delta Printer
Designed from the ground up as a low cost, highly scalable delta printer. This printer has been built as small as carry on luggage size, up to an 18in wide print surface and is capable of larger. Approximate cost is low to mid $500 range start to finish, including electronics for a basic model.
Build Author M^3 Views 13152
M Cubed CNC Mill
A no-nonsense CNC mini mill to get the job done.
Build Author UltiBots Views 5494
Machined Aluminum MagBall Carriages
Machined Aluminum MagBall Carriages
Build Author Nugz Views 9562
Angus : A Slightly "Beefier" OX
This is where I will share my attempt at building a slightly "beefier" OpenBuilds OX CNC Machine using commonly available parts in the spirit of OPENBUILDS and Open Source in general. I have a tendancy to over-build things so I will be balancing that tendacy against budget constraints and common sense as much as possible.
Build Author Mark Carew Views 33666
This SphereBot is based on the EggBot which is an open-source art robot (drawbot) that can draw on spherical or egg-shaped objects.
Build Author Sonny Lowe Views 1393
The MakerSL Customized OB Minimill
This is my interpretation of the OB Minimill, what I've changed so far, and what may continue to change as my requirements change.
Build Author mike125 Views 9796
Cheetah 1.1 CNC Router
I hope to have a working prototype built soon.
Build Author Bud Griffin Views 2447
BF3D OX (Big Freakin' 3D OX)
This is my latest printer build. The second printer I've built using V-Slot.
Build Author Mark Carew Views 48582
C-Beam™ Linear Actuator Build
Here are a few helpful C-Beam actuator ideas that will help you get a start on your builds
Build Author David Bunch Views 6912
Delta 3d Printer using 3/4" Electrical Metal Tubing (EMT) for Horizontals & 2060 V-Slot for the Verticals and adding a tetrahedron at the top.
Build Author asb_79 Views 6765
Versabot - All metal 3D printer
An all metal construction cartesian style 3D printer with a very rigid frame that has the flexibility to function as a desktop milling station or laser cutter with appropriate user designed attachments. Design is scaleable to suit any size requirement. All axis are leadscrew driven. V-Slot and Mini V-wheels have been utilised for the linear rails.
Build Author Mark Carew Views 33906
V-Slot™ X -Y Stage Hidden Acme Rod Example
An X-Y Stage created from two self contained acme screw linear actuators. This build was published as an example of how many of the OpenBuilds Parts can be used.
Build Author griso Views 4305
Over 840 parts. Of whom around 450 are screws and nuts, more than 100 parts are printed on a 3D printer, the frame consists of about 60 components. There is nearly 40 electrical components connected with tens of meters of wires, most of them sleeved.
Build Author cbordeleau Views 4842
OpenBuilds C-Beam Double Slider
This slider uses an 500mm OpenBuilds C-beam and the design is such that the effective length of the slider is slightly less then twice the length of the C-Beam. It can be used both motorized or not.
Build Author James Archer Views 5060
Archer - An extendable all metal 3D printer
This is an all metal build using OpenBuilds V-Slot linear rails to produce a high quality and cost effective 3D printer. The printer is designed to be scalable for your desired build area and can utilize high quality hotends with 16mm groove mounts such as E3D.
Build Author winand Views 9692
YAOP (Yet Another Openbuilds Printer)
Yet Another Openbuilds Printer, my version :-P
Build Author Jonathon Duerig Views 3839
Archivist Quill Book Scanner
This is a book scanner built out of aluminum extrusion. It is designed to get high quality scans without harming the book. It is not automated. You still have to turn the pages yourself.
Build Author Colin Russon Views 5576
Lead screw based Foam Cutter that can easily be adapted to full belt / pinion drive and to CNC.
Build Author UltiBots Views 7798
Metal MagBall Carriage
UltiBots LLC designs and packages DeltaBot 3D printers using quality components. Our kits are V-Slot based. Print results are impressive. The Metal MagBall Carriage was designed to be ridged, compact, and simple.
Build Author Yoshiya Arii Views 19139
V-Slot Laser cutter and engraver
The Smart Laser Mini is an open source such as use Raspberry pi. Easy to assemble type of desktop laser cutter and engraver. Also we used V-slot
Build Author mikev Views 4037
C-Beam Evolution MkII
The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.
Build Author Mark Carew Views 50462
V-Slot™ Linear Actuator Build (Belt Driven)
Quick and Simple V-Slot Gantry System. This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts. You can mount this system an many ways so be sure to download the example models.
Build Author Kyo Views 5992
V-Slot Cutting System
A System of 3d printed parts to use along with your projects aluminum extrusion to cut your pieces of v-slot to length manually.
Build Author tonkajeep34 Views 11577
DIY GoPro Camera Slider
A compact portable DIY camera slider for time lapse photography using a GoPro.
Build Author TomH Views 10212
H-Bot CoreXY Cube with Fixed Build Plate
Use of V-Slot for frame and rails with option to use identical 500mm uncut lengths: 8 * 20x60 x 500mm 8 * 20x40 x 500mm 7 * 20x20 x 500mm (2 cut into four identical 125mm pieces for filament holders) Use of uncut 500mm rails obtained through use of 12 joining plates for use as spacers. Alternate approach is to trim two 20x40 and 1 20x20 rail by 6-8mm each. Build volume ~400mm cubed (with dual extruders). Use of only openbuilds components! Currently in design phase...
Build Author nidal Views 8685
Simple cartesian style CNC. Uses ACME screws for all 3 axes, 20x40 v-slots and should have 50cm x 50cm x 50cm work volume.
Build Author Brian Views 11348
Cubic 3D Printer
I've made a 3D printer
Build Author Kyo Views 4396
A Workbench idea built from V-slot and openbuilds parts.
Build Author dodgenet Views 2019
Budget 1500mm OpenBuilds V-Slot Deltabot Build
This 1500mm tall Delta is a work in progress. The triangle corners are water jetted from 1" 6061 Aluminum, and are welded to 1" square tubing. The 1500mm OpenBuilds 20x20 V-Slot extrusions are held into the corner brackets by two stainless steel set screws per bracket. This printer will need to be reinforced with wall brackets due to the combination of height/materials.
Build Author Mark Carew Views 10050
V-Slot Modular Sit/Stand Desk
In this build we put together an awesome modular stand-up or sit down desk that is perfect of any home or office.
Build Author raykholo Views 2940
ROUX - A Routy-OX Hybrid
ROUX is a 2'x4' CNC that can be easily handbuilt without an existing mill and removes the need to buy generic plates for the Routy. A simpler, more refined machine.
Build Author Justin Butler Views 3820
My Belt & Pinion Drive CNC Router
My CNC Router design and inspiration came from the Routy CNC project. I modified some of the aspects of the Routy build, but left the original XY dimensions intact. The build has been very enjoyable thus far and am nearing completion of all wiring in preparation for my first test run!
Build Author evgeny156 Views 1614
3D Printer on Prusa architecture with best parts available
Wanna quet an nice looking device done by my hands
Build Author Kaarbble Views 7006
Kaarbble Nylon Bot
We plan experiment on nylon 3 D printing;
Build Author MechEng Views 11143
Generic Rigid 3D Printer (Currently on 1st Revision!)
Rigid 3d printer with more than enough room for dual extruders. Easily expandable platform.
Build Author Mark Carew Views 4486
Work Bench Stand
Here is a nice little simple build that will help to free up some extra space on your work bench. If your like me you need all the room on your work station you can use, so this is great to have.
Build Author Jason Kraft Views 3435
The MULE (an OX inspired 3-axis CNC)
The Mule is a 3-axis CNC inspired by the OX CNC by Mark Carew. This machine borrows the OX's sturdy frame and upgrades the X and Y linear actuators through the use of three 500mm lead screws (as opposed to the belt system of the OX). The result is an inexpensive, sturdy, and powerful design built for cutting tough materials such as aluminum.
Build Author evil2002usna Views 4913
Cheap Ballscrew Ox CNC Router.
Build Author Jonathon Duerig Views 1702
Chrysalis: An Enclosure for TAZ 6 3d Printers
Aluminum-framed enclosure for TAZ 6 3d Printer made with Makerlink.
Build Author Bobnet Views 11389
Oversize ShapeOko as a 3D printer.
Converting a ShapeOKO into a 3D printer.
Build Author cbordeleau Views 2336
Slider Levelling Platform
3d printed V-Slot Gantry Plate leveler.
Build Author Mike Andrews Views 5670
Monster - a multiple material 3D printer with 20"(X) X 14"(Y) X ~20"(Z)
A Laut3k derivative that goes for volume and large number of print materials at the same time. Using OpenBuild linear motion systems to get away from belt drives.
Build Author Martin Bogomolni Views 5799
Delta-Six ( Jerry426 variant )
Building a Delta-6 variant, using recycled parts from a WolfStock Delta printer.
Build Author Robert E. Nee Views 3068
Large cartesian gantry style 3D printer
This will be a fixed bed, v-slot implemented X,Y,Z axis gantry style 3D printer.
Build Author JCPhlux Views 8538
Large Core XY 3d Printer W/fixed build plate
Build Author boubouexpress Views 4691
3D Drucker sparkcube V1.1XL V-Slot™ Mini V Linear Actuator Bundle
sparkcube V1.1XL edit V-slot mini v linear
Build Author Bobnet Views 7246
Rackmount + OpenRail
OpenRail attached to a 19" rackmount 15U box.
Build Author JerryD Views 661
1500x1000mm Adjustable Height
I have the demand to cut/etch tall pieces of material. For this reason, I have designed a machine with 500mm uprights with adjustable gantry height. This way I can raise/lower the sled and z-axis as needed. I've also chosen to use a linear C-channel assembly for the Z axis with the plate mounted to the gantry instead of the other way around. This will allow for maximum range of the z-axis. The parts list/BOM does not include motors/belts/pulleys or electronics.
Build Author Pol Feliu Views 5348
Batxillerat Research Project: Design and construction of a CNC
I'm working on a cartesian cnc router for my school research project
Build Author Robert J Rissell Views 2609
Remix of Sage's Delta-Six
I'm looking to build a large build-volume, accurate, steady 3D printer with the eventual aim of swapping in a diode laser to allow for use as a cutter for printing/cutting parts out of balsa sheet for building model aircraft.
Build Author zann68 Views 4187
OX CNC 4'x4'
Out with the Old in with the New. Trying to build a nice clean setup that myself and my sons can use and enjoy.
Build Author eddiejr Views 2813
Eddie's Build of Niko's (gianakop) Egg Painter
This is my build of Niko's (gianakop) Egg Painter. Egg decorating is something many Christians do for Easter Sunday and the Easter (Paschal) Season that follows. This will be my initial use for the build, but also with minimal modification to be able to write/paint on other round objects like Christmas ornaments, coffee mugs, etc. Many people also decorate eggs for purely secular reasons.