Select a Category
Build Author Mark Carew Views 628007
OpenBuilds OX CNC Machine
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
Build Author Kyo Views 43086
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
Build Author GinoTheCop Views 19638
Building a larger C-BEAM CNC Machine with no previous experience.
Build Author Schematix Views 55430
OX-Metal CNC Router Mill
The OX-Metal is based on the original OX CNC mill But with a few modifications and add-ons
Build Author Mark Carew Views 77913
ROUTY CNC Router (V-Slot Belt & Pinion)
A cool little CNC router build that uses the V-Slot belt & pinion drive and stock parts.
Build Author Mark Carew Views 106487
C-Beam™ Machine - Plate Maker
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
Build Author ahayden Views 10731
C-Beam Prefab Untitled
The C-Beam Prefab Untitled is designed as the cartesian compliment to the C-Beam XL. With the exception of requiring a couple more 1000mm C-Beams and lead screws, the build requires a minimum of additional parts. The primary intention of the build is to maximize the cutting envelope while still staying within the sweet spot for C-beam rigidity. This design can easily be modified and allows for further custom structural components to be cut with the initial build platform.
Build Author Motions Views 27662
Charging Ox CNC Machine
A heavily modified Ox CNC build to replace SO2.
Build Author Hackscribble Views 15340
1000mm x 750mm OX with some planned enhancements. My first venture into CNC.
Build Author beardyblair Views 10393
My build log of an adapted Sphinx design with additional height and a larger X and Y axis.
Build Author Serge E. Views 42784
myOX : a 4' x 2' OX CNC with potential
This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM
Build Author Mark Carew Views 47029
Phlatprinter foam cutting CNC machines are awesome space saving mills that use a rotary axis as a sheet feed.
Build Author Ronald van Arkel Views 24903
Routy GT2 290 BSX CNC Router, Low Cost and Good!
The Routy GT2 300 BSX CNC Router is a Low Cost CNC build. It performs the same as the larger Routy's from OpenBuilds but doesn't break the bank!
Build Author uwsdandt Views 3361
This is a build supported by Ooznest by a team of girls in Year 8 (12/13 years old) to machine model F1 cars for the F1 in Schools competition.
Build Author dcorb Views 11675
Steel Frame CNC Router
A scratch built steel frame CNC Router.
Build Author winand Views 13018
YAOR (Yet Another Openbuilds Router)
Yet Another Openbuilds Router, my version :-)
Build Author Matt Nelson Views 5847
I'm building an OX CNC router. It will be the larger size of 750x 1000mm. This should give me a working area of about 22"x30".
Build Author Peter Oakes Views 18110
The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build
I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.
Build Author Slewratesarego Views 11870
The RAT. A form ply and aluminium hybrid.
A hybrid of form ply and aluminium. 835x1260x100mm working envelope.
Build Author Dexter Oddwick Views 2024
Black Rabbit 1500
This is a router that I designed that is loosely based on the Openbuilds Ox, but designed to be heavy duty, rigid, and yet quick and agile.
Build Author Steve B Views 10634
OX PPR - Portable Plasma/Router
PPR = Portable Plasma/Router. A ~30x30"work area with leadscrews. Work surface is below support members. Can be placed ONTO cutting surface.
Build Author SlyClockWerkz Views 10786
1000mm X 1500mm OX CNC -- Fiber/Garolite
Building the full size OX.
Build Author Julius Views 10573
OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative
1000x1000mm Ballscrew driven OX Derivative. Dewalt 611 spindle and TB6600 Drivers.
Build Author Hytech2k Views 25467
Triple Shot R-P-M Area 51 CNC Parts
We wanted to create a rapid prototyping machine with excellent 3D printing, laser cutting and engraving, and light CNC router work capabilities.
Build Author Brian Popp Views 4019
Salmon Sphinx 1.0
A tribute build based on Kyo's wonderful CBeam Sphinx. My hope is to improve on that build slightly, but to be honest, I'll probably just screw it up. I'll use this build to publicly document my failures.
Build Author Neil Rosenberg Views 58628
The Frog: CNC Router
Frog CNC Router. Inspired by OX and "Routy". 24"x36" active working area, approx. 3" usable Z motion.
Build Author Jestah Views 4204
Small Red OX
A small router for thin plate stock
Build Author Richard Long Views 2949
Solid basics CNC router
This build focuses on the basics to provide a good foundation to further enhance the ability to achieve tight tolerances
Build Author Mark Carew Views 8649
Phlatprinter MKII Foam Cutting Machine
Build Author Ronald van Arkel Views 10372
Routy GT2 300 BSX CNC Router
This is the first project that I would like to share with you. I know the build looks familiar and it is; it’s based on kram242´s Routy. Work area is 300*500*55 mm and is NEMA17/GT2 belt driven.
Build Author RSW Views 3967
RSW's C-Beam Build
I built a CNC Router using 3/4 MDF, 1/8 aluminum angle for bearing races and various other odds and ends. I learned a lot about how not to build a CNC router. I found Openbuilds.com and decided to build a C-Beam for my first build. The long term idea is to use this machine to build custom plates for and OX type machine and a 3d printer.
Build Author Jim_H Views 4606
Jim's C-Beam Machine Build
This machine is fantastic. Teamed up with Fusion 360, Inkscape, and GrblPanel, I'm well on my way towards making at least one Christmas gift this year. I had some frustrating times during the build, mainly with getting everything to go together square, but overall it was fun. I can see that I'm going to need to be a bit creative in order to max out the work area for this machine so that I can produce the product I bought it for, but it will be able to do so much more for me as well.
Build Author John J Talavera Views 11695
CNC FOR EVERYONE!
This build was very complex due to the fact I wanted to create a low cost larger than normal CNC. I did not want a MDF or plastic body. I wanted it to be able to do more than most CNC routers this size on the market.
Build Author Jake Fry Views 6465
Another (Mostly) Stock OX
For my first Openbuilds project, I decided to put together an OX CNC Router.
Build Author kev20009 Views 5265
This Build Is Is Inspired By OOZ Nest CNC, But With Some Changes,
Build Author Steven Sampson Views 5798
A CNC router designed to handle a 4'x8' sheet, for as close to $2000 as possible. The price barrier resulted in my choice to use timing belts rather than leadscrews or rack&pinion. Build List still being updated
Build Author Nugz Views 9311
Angus : A Slightly "Beefier" OX
This is where I will share my attempt at building a slightly "beefier" OpenBuilds OX CNC Machine using commonly available parts in the spirit of OPENBUILDS and Open Source in general. I have a tendancy to over-build things so I will be balancing that tendacy against budget constraints and common sense as much as possible.
Build Author Robert.sims Views 9400
What I want to build is a unit to: rout wood, plastic and occasional aluminium . to be able to swap cutters. i.e. drragknife, laser, router, drill
Build Author Chris Anderson Views 6900
An OX build - little large than specs and plates 3D printed
Build Author chenderson Views 3313
CRH C-BEAM Router, steel capable
C-beam based CNC router using mostly openbuilds parts.
Build Author rpagewood Views 7073
C-beam Router rack and pinion
I want build a frame that is as sturdy as possibility while at the same time keeping it as compact as possible. working area will be approx 1200mm x 600mm
Build Author Jen Views 3837
My first OX build
This is the story of my experience building a 1000 x 750mm OOZNest OX CNC router
Build Author Rick 2.0 Views 998
Adjustable Router Guide Template
This project is an adjustable router guide template made with 20x60 V-slot. It was meant as a less expensive and more user friendly alternative to commercially available units.
Build Author Anthony Bolgar Views 6073
L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes
This build is for a testing rig to use while testing out different controller boards and CAM software for milling and routing. It is in the early stages, planning is complete, parts are ordered. Awaiting parts delivery to start build. Please not the BOM only covers parts from the OpenBuilds part store. I will be posting the other required items very shortly.
Build Author stargeezer Views 4960
OXilla - a 3ft x 3ft CNC Router/Mill - Goals are strength, power and speed
This will be an ongoing log as I build this machine. Name change by popular demand - at least a couple of us. :)
Build Author Jonathon Harms Views 1374
Schematix Ox-Metal Build
A build of Schematix's Ox-Metal design, with a 0.8kw watercooled spindle.
Build Author RandyF Views 1280
Large C-Beam Sphinx style CNC Build
Started my build of a large Sphinx style cnc Router. I wanted one to handle the Dollar Tree Foam Board (DTFB) so I am making this to handle 2' X 3'. This is my first endeavor for a CNC so I am learning as I go but there is one thing for sure.
Build Author mike125 Views 9634
Cheetah 1.1 CNC Router
I hope to have a working prototype built soon.
Build Author evildean Views 6059
OX-SUMO, SUMO-OX, OXSUMO?
One meter square. Short and stout.... reminds me of a Sumo Wrestler. A temporary and adjustable configuration I have devised to cut my own plates. I have kicked around ideas for about a year and the C-Beam extrusion has made this attempt to realize my ideas irresistible. This is just one step towards bigger and better things!
Build Author Laurence Carroll Views 7591
C-Beam Double X
Per the special notes its a variant of the C-Beam, Machine.... I have noticed that alot of people build a CNC router to cut parts for other larger CNC machines.. eg Delta Printers etc....plus this will enable me to cut parts for model RC plans UAV's etc...
Build Author AndersFaust Views 6793
(R)OX CNC [FR/EN]
Another (R)OX CNC something like build, in French please ! Pics Heavy !
Build Author Robert Bailey Views 21818
FRANKINATOR -- My CNC Router Built Around The C-Beam Rail
I started this build about 2 weeks after the c-beam hit the store. I purchased a single bundle and ordered a TinyG to run it. where I work I have Hardware, Software and Mechanical engineers and they all got sucked into my project. they want one to do prototyping at the office, once they see mine...
Build Author Eric Foster Views 4169
CoreXY Table with Symmetric Lead Screw Z axis, Build volume: 293mm x 290.75mm x 223.83mm
Build Author Ryan McCormick Views 5426
C-Beam Machine Bundle
Short description of my assembly and use of the C-Beam bundle from the Open Builds Part Store.
Build Author Jasen Stengel Views 6957
GrOX (OX based router)
1000mm x 1500mm OX router using Openbuilds parts and plates by Chris Laidlaw
Build Author Iwan Müller Views 11449
CNC Router (Non OX)
My own Design (not an OX Derivative) using standard Parts.
Build Author Jesse Jenkins Views 6045
Hedron's build with Ooznest kit and Xylotex motors
A 3-axis flying gantry (4'x4') mechanical kit is assembled. A 3D printer is used to make cable chain for tidy and cheap wire management. A BeagleBone Black development platform with Machinekit software (LinuxCNC) is configured to control a Xylotex motor driver box connected to an Openbuilds Ox direct-drive pulley and belt motion system. A vacuum dust-collection system is designed, CNC-routed and installed. A steel table is made to mount the table onto.
Build Author Frank Steinhauer Views 12295
Design of a multifunctional CNC machine.
Build Author BismarckDon Views 3200
Custom OX Build
Inspired by the original OX by Mark Carew, this is my Custom OX. Many small changes, additions, and upgrades. Build is in progress and this post will be updated regularly with photos. Enjoy!
Build Author Rwetzler Views 3597
This is a variant of a typical OX (Mark Carew inspiration) router using C-Beams/8mm Acme rods to drive all three axis. I went with a 1000mm x 1000mm frame size. Useable space is 28" (711mm) X 26" (660mm) with a Z axis work travel of approx. 3.25" (82.5mm). A TinyG is used as a controller along with Fusion 360/Chilipper as the software for generating and running gcode files.
Build Author richthorn Views 5283
I have been looking for a good solid kit to build off of for some time and when I saw the Ox buildlog I knew I had to have one. Ordered most of the pieces from Open Builds and started planning. Had a nice gentleman named Chris cut the required plates from 6061 aluminum for me (he sells them on eBay now if you're interested) and got to work.
Build Author JordanMoss Views 3524
OX based lead screw Machine
Initial design for my CNC mill\router based around C beams
Build Author d0rk1e Views 4548
OXford (OX fortified)
150x75 cm OX with additional Y axis supports and hopefully a working double belt system
Build Author Paruk Views 13628
OX 1500 x 1000 mm
Build Author lanciere Views 4223
Modified OX CNC Router (1000x750 mm)
An OX Router I'd like to modify to improve the frame rigidity and resolve some alignment problems
Build Author Larry_AK Views 7152
Pretty much a straight OPENBUILDS OX that slowly getting some modifications.
Build Author Dave Zahn Views 8310
Aluminum OX build with some modifications
This is my OX CNC mill. It has been a labor of love for over a year now! I hope you find it interesting and inspiring! I also hope that it gives some of you more experienced CNC builders a different perspective and some ideas!
Build Author jkalberer41 Views 2743
Expanded Routy using 290 build instructions
Using the Routy290 build and an awful lot of help from puntoMX, this machine has been expanded in the X and Y axis. My first build, I'm learning a lot about all of this. I've had to disassemble parts of this thing many times due to forgetfulness, but that's ok. Also, I've forgotten to take constant pictures throughout the build.
Build Author Joey Selzler Views 5663
My JGro CNC becomes an OpenBuild Project
This is the story of my progression from the JGRO cnc router design to using the OpenBuild system. In the process I think I have learned some things about cnc routers and the accuracy required to make a good build.
Build Author Charles Roseberry Views 2342
C-Beam basic package doubled in size.
Build Author mikev Views 2531
C-Beam Evolution MkII
The C-Beam Evolution is an evolving machine. The MkII is inspired by Kyo's C-Beam Spinx but currently uses my own design of plates made of 8mm acrylic (X-axis ends) and 6mm polycarbonate (Y axis ends). The plates were made on the MkI but I hope to be able to make 6mm aluminium plates on the MkII for the MkIII.
Build Author signzonepr Views 4820
HD c Beam CNC Router
24x32 Cnc Router, I used vSlot c Beam Extrusion and Wheels!
Build Author Chefson Views 4610
OX CNC Router
Ca fait 2 ans que je rêve d'une Fraiseuse CNC. Ni trop grande ni trop petite, sans avoir le budget pour en acheter une toute faite. Je suis artisan menuisier ébéniste et j'ai finalement décidé de la construire. Le projet OX m'a séduit, alors je me lance.
Build Author Jovian Views 13038
Proteus is the Greek God of change. Besides the numerous aspect of 3D printing that this could relate to this machine like the god can change. The Build allows for an interchanging head that will allow different functionality to be quickly and easily adapted. So you could print clay, silicon, plastic, cut with a laser cutter or even attach a rotary tool
Build Author Builder+Bob Views 2520
Builder Bob's CNC
Here is the consolidation of my woodworking shop, a CNC Router!
Build Author sgspenceley Views 16342
Aluminium OX - Canada
Document my OX build process. I will also be sharing SolidWorks parts files & assemblies.
Build Author dougsnash Views 4507
Another OX CNC Router
An OX CNC router using Blue OX Solutions gantry plates, a Bosch Colt router, and most of the remaining parts coming from Openbuilds parts store. Table has about 22"x55" cutting capacity and I am planning on a combination T-Slot and vacuum hold down system.
Build Author Barry Danks Views 2956
TAZ C-Beam CnC Router by RC-CnC
C-Beam inspired CnC Router (1000x750) Approx 90mm of Z travel
Build Author Colin Tree Views 3526
The first criteria was portability, the second was cutting out a sheet of ply, the third was the ability to shape a foam surfboard blank, but the main criteria was a small budget.
Build Author Cleyton Alencar Views 1872
C-Beam Machine upgrade to 1000mm x 1000mm
This built is to convert an existing 500x500 C-Beam Machine into 1000x1000. Inspired by several builds including C-Beam Machine : (http://www.openbuilds.com/builds/c-beam%E2%84%A2-machine-plate-maker.2020/) and Gino's build : (http://www.openbuilds.com/builds/c-beam-gtc.3250/)
Build Author Donald D. Parker Views 2971
BABE - CanUSA Blue OX, bigger than the average OX
This is a basic description of my OX-like build of Babe, Paul Bunyan's Blue Ox. It is a work in progress. The idea has been germinating for about 4 years, with several twists and turns and false starts along the way.
Build Author Dave420 Views 3317
Dave's Z axis and powder coated.
I just did my first Powder coat paint job on a Z Axis with 9inchs of travel for the DIY CNC Plasma Cutter, Mill Head, Router, Engraver, Laser Head, Water Jet Cutter Machine. 2 different Z Axis ride plates and a 80mm Router/Mill Head/Spindle clamp. Baked on finish in a old oven i had.
Build Author angelo Views 7347
TABLE OX Router/3D-Printer
Build Author Rakmup Views 21109
CNC Router Lathe
Steel square tube frame with dual feed gantry and indexing lathe section. Will have 36" x 30" x 6" travel.
Build Author PCBman Views 2165
This is a design for a desktop CNC machine. It may be a router or laser. I am undecided as to the final design.
Build Author RogueGeek Views 8099
Yet Another Ox Build
This build log will chronicle the construction of my oversize (1000mm X 1500mm) OX router.
Build Author edward siegel Views 5834
cnc plasma table
ive got most of the wire harness made up too im using Chinese electronics for now I will upgrade later when this thing makes me some cash lol im using a ibm think center to case to hold my electronics ive got a 25' parallel cable to put some distance between the table and the computer
Build Author Rick Holder Views 1071
Gantry Type CNC with Makita Router
The machine has met and exceeded my expectations on repeatability and accuracy. Cost was approx £600 including the Windows tablet.
Build Author raykholo Views 2820
ROUX - A Routy-OX Hybrid
ROUX is a 2'x4' CNC that can be easily handbuilt without an existing mill and removes the need to buy generic plates for the Routy. A simpler, more refined machine.
Build Author Justin Butler Views 3579
My Belt & Pinion Drive CNC Router
My CNC Router design and inspiration came from the Routy CNC project. I modified some of the aspects of the Routy build, but left the original XY dimensions intact. The build has been very enjoyable thus far and am nearing completion of all wiring in preparation for my first test run!
Build Author John J Talavera Views 6791
CNC FOR EVERYONE TITAN CNC ROUTER
www.cncforeveryone.com TITAN CNC ROUTER is the perfect PCB milling machine or for smaller projects. Don't be fooled by its small size it is capable of routing with the big boys...!
Build Author Dave Ashley Views 4323
Sketchup Design of a PVC CNC I Intend to build.
Build Start to begin Feb 1st.
Build Author Catawissa_CNC Views 4823
Arctic Ox CNC Router
This is a cartesian CNC Router build that is based off the OX CNC build by Mark Carew. I am using Spark Concepts CNC xPro controller board and their 400w spindle kit.
Build Author Narvick Views 4526
CNC MILLING ROUTER
CNC MILLING ROUTER
Build Author Garrettcompston Views 1875
My 2nd cnc build
My new build to upgrade from my worn out shapeoko
Build Author Justinat Views 3429
Router / Plasma Prototype Build
this is my first attempt at a CNC Table
Build Author Duane Views 3221
Little Big OX
A complete CNC newbie is tackling a mighty challenge, Not only is he making a CNC router, He's going to try and upsize it.
Build Author john A Views 1452
Cartesian CNC router
This project has been a steep learning curve in an unfamiliar area for me. It has been a very rewarding experience and has opened up so many more possibilities to pursue in the future.
Build Author Dave420 Views 3855
Powder coated multi CNC Z Axis plasma adapter with Prox.
Powder coated multi CNC Z Axis plasma adapter with Proximity sensor. . It can also hold a 80mm Router head/Spindle as seen in my router build.
Build Author Will Murphy Views 2896
Murphy OX-CNC Dreamin
I am in the design phase of my CNC. I would like to thank everyone who has placed resources on the site. I am using it to the up most! I will update as I continue the design and share my progress.