Select a Category
Build Author Mark Carew Views 627185
OpenBuilds OX CNC Machine
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
Build Author Kyo Views 42891
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
Build Author Robert Hummel Views 43368
This will be an Aluminum OX build. Plates and all design credit goes to Mark from open builds. I may add my own touches but mainly this is to see how Aluminum plates perform
Build Author sgspenceley Views 51184
Linear Rail CNC Machines
A CNC build using linear rails & lead screws.
Build Author GinoTheCop Views 19554
Building a larger C-BEAM CNC Machine with no previous experience.
Build Author Schematix Views 55057
OX-Metal CNC Router Mill
The OX-Metal is based on the original OX CNC mill But with a few modifications and add-ons
Build Author Carl Feniak Views 161037
A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy.
Build Author sausagePaws Views 33087
Embroidery machine with XY belt and pinion drive.
A simple Embroidery machine using an XY belt and pinion drive to drive a hoop under a standard sewing machine. Needle timing, machine power and stepper control are all provided by a PIC processor. A tablet provides the higher level formatting required for communicating with the PIC chip.
Build Author Robert Hummel Views 106327
With such great success/attention my laser got, I ended up with a good friend that would like to dabble in stencil art and so I have decided to share my build with him and you here :) I will be using all the same electronics as in my previous build except the driver boards I will be using are the famous reprap 4988's they are more easy to come by and cost less. I will also be using open builds mini v wheels/v groove extrusion just so I can get a feel for their versatile products
Build Author Martin.Barfoed Views 44916
Large format 1200X1500mm OX Build using Stainless Steel plates, dual belt configuration. Limit switches is a mix of micro switches and NPN Proximity switches. Electronics based on parallel break out board, Long Motor Stepper drivers (Chinese stuff) and motors controlled by Mach3. Spindel will be Kress 1050.
Build Author Ryan Lock Views 70460
Ooznest OX CNC Machine
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
Build Author mytechno3d Views 46929
Maximus 3D Printer
A full scalable 3D Printer , with a big printing area. Build with openbuild parts from www.vslot-europe.com
Build Author skarab Views 40836
Much4 - LaserV printed version
By following the way of Robert Hummel, I drew a version of its exellent Laser V to use NEMA17 and easily printable parts.
Build Author Marshall Peck Views 43517
Voxel OX - Extendable 3D Printer and CNC Platform
An open source 3D printer design with a sturdy V-Slot frame.
Build Author Robert Hummel Views 30377
890KV OX RC spindle
This build is intended as a light alternative to the Dremel rotary tool.
Build Author Indieflow Views 52421
A lightweight, portable, accurate 3D Printer that has a good sized print area and small overall footprint that is easy to build, with easy to source components. The design is OpenSource allowing those with the capability to make their own parts get up and running.
Build Author Sage Views 57394
Super rigid Delta printer, using 20X40 V-Slot
Build Author Mark Carew Views 77832
ROUTY CNC Router (V-Slot Belt & Pinion)
A cool little CNC router build that uses the V-Slot belt & pinion drive and stock parts.
Build Author Mark Carew Views 106316
C-Beam™ Machine - Plate Maker
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
Build Author semperfikurt Views 11548
Beefed-up and customized OX build
My Machine is based on the OX CNC designed by Mark Carew as well as the ooznest kit, and it incorporates a bunch of my own details and revisions to increase performance and robustness. It has become way more beastly than I originally planned!
Build Author ahayden Views 10712
C-Beam Prefab Untitled
The C-Beam Prefab Untitled is designed as the cartesian compliment to the C-Beam XL. With the exception of requiring a couple more 1000mm C-Beams and lead screws, the build requires a minimum of additional parts. The primary intention of the build is to maximize the cutting envelope while still staying within the sweet spot for C-beam rigidity. This design can easily be modified and allows for further custom structural components to be cut with the initial build platform.
Build Author Hytech2k Views 56216
Area 51 CNC Parts F-117 CNC Gear Rack Drive System
This is my journey on building a rack and pinion Ox variant called the F-117 CNC.
Build Author Robert Hummel Views 18091
Stinger V Micro Mill
While building my OX AI I found myself with left over v slot and thought to myself, what do I need that I can build using them? Well since I make a lot of my own PCB boards for projects I figured a micro PCB mill would fit the bill ;) With inspiration from the OX and OX AI I give you the Stinger V :)
Build Author Savvas Views 7759
C-Beam Lead Screw CNC Mountain
I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.
Build Author Moag Views 32290
C-Beam Machine XLarge
A rigid and wide format, plate and carving CNC.
Build Author Metalguru Views 6731
Big Ox Heavy Duty
A Heavy Duty version of the standard Big Ox build.
Build Author DistortedDesigns Views 20833
Project Death Star - DistortedDesigns Laser Engraver
2 watt Laser Engraver, Simple, Fairly Low Cost, and Portable
Build Author sebf34 Views 11732
OX Based cnc 3000 x 1500 Double belt
OX Based CNC
Build Author Hytech2k Views 13071
Florida Ox 2x4 Area 51 CNC Parts Original Build
2x4 Ox with Vac table
Build Author Motions Views 27647
Charging Ox CNC Machine
A heavily modified Ox CNC build to replace SO2.
Build Author evilc66 Views 16104
LCD Based SLA Resin Printer
SLA resin printer based on a gen3/4 iPad Retina display. The design intent is to create a printer with the highest resolution possible with a lower cost of entry compared to DLP projector based SLA printers.
Build Author Hackscribble Views 15318
1000mm x 750mm OX with some planned enhancements. My first venture into CNC.
Build Author beardyblair Views 10358
My build log of an adapted Sphinx design with additional height and a larger X and Y axis.
Build Author Serge E. Views 42759
myOX : a 4' x 2' OX CNC with potential
This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM
Build Author Dollarz81 Views 4468
C-Beam XXLarge "Tank"
This is a modified build C-Beam XLarge. 1000mm C-Beam used for X and Y axis, and the Y Axis moves the X bridge, not the material being worked.
Build Author Glenn Weston Views 8596
"The Moagie Mill" My C-Beam XLarge
My Experiences building the C-Beam X Large. Maybe you can pick up a few pointers from my ramblings and experiences if you are considering building this machine.
Build Author alex_b Views 6496
TACIT RONIN CNC - Flood Coolant Enabled C-Beam
The TACIT RONIN CNC is a fully enclosed C-Beam platform intended for flood coolant cutting of Carbon Fiber and G10 composites.
Build Author Moag Views 9271
Moag's CNC Mill
A design in progress, to 3D carve two-part Aluminium injection moulds for Soft Plastic Lures and Lead Jigs, so I can prototype some of the concepts rattling around in my head. All Openbuilds parts where possible, 1000x500mm footprint, 0.8kw Water-cooled Spindle?, High Torque Stepper?,Smoothieboard?, I still have no idea. As a newbie to the CNC world, any wisdom would be welcome to take this from just a idea into reality so I can start playing with all this awesome stuff. Thanks in advance
Build Author Cuong Vu Views 17258
It took me 18 long nights to build it
Build Author MattiasN Views 15945
MyCNC(1000mm x 1500mm)
My CNC project
Build Author oni305 Views 33849
Laser Engraver Control Board + Inkscape extension
This is a PCB designed to control a laser Engraver CNC
Build Author Paul Stoller Views 7379
C-Beam Machine - MyFirstCNC
This is my first foray into CNC machines, after much review I decided on the C-Beam machine as it seemed easy to work with and will enabled me to build more and larger machines as I gain knowledge. I am planning on building the machine largely unmodified from the reference design. I will be building the machine an axis at a time as I need to spread out costs over time.
Build Author Tweakie Views 35967
Here it is my intention to show what was involved in adding a CO2 laser to my existing CNC machine.
Build Author Keith Davis Views 15351
A quiet, 8inx8in build area, Cartesian printer with permanently level bed. This is a compact, solid, inexpensive printer that will reliably print any type filament for thousands of hours while you sleep, fish, or play ball in the park.
Build Author Mark Carew Views 47003
Phlatprinter foam cutting CNC machines are awesome space saving mills that use a rotary axis as a sheet feed.
Build Author ymilord Views 24394
FARM OX (Four Axis Rotary Machine)
Four Axis Rotary Machine (FARM) OX. Equipped with a X,Z,A & C Axis.
Build Author mytechno3d Views 10024
Maximus Evolution (Still another XL 3D Printer )
Maximus Evolution : 380mm x 400mm XL 3D Printer
Build Author Mark Carew Views 41860
X Y Table OpenRail / V-Slot Build Examples
The X/Y table system is a great starting point for many CNC projects giving you the ability to move an object on the X and Y axis in a simple compact style.
Build Author Ronald van Arkel Views 24890
Routy GT2 290 BSX CNC Router, Low Cost and Good!
The Routy GT2 300 BSX CNC Router is a Low Cost CNC build. It performs the same as the larger Routy's from OpenBuilds but doesn't break the bank!
Build Author gjwest Views 20024
Time Lapse Camera Rail
This is my first go at building a simple Time lapse camera rail system using as much pre-existing hardware and software as I could.
Build Author gwandad Views 8682
C Beam Rotary
I've used the good work of Openbuilds & expanded it to suit.
Build Author Ronald van Arkel Views 6961
Promoveo Study Builds
Build Author Silverrabbit2 Views 3445
Ooznest OX, Workbench, & Folding Table
An OX based unit with innovation surrounding it -- 9 drawers, workbench, folding CNC table, & portability.
Build Author Steven Bloom Views 17785
This is my first CNC build. The Sea-OX is a machine built out of three 1000mm C-Beams. I plan to have a Y length of 1000mm and a X length of 650mm. The Z should have the ability to move approximately 100mm.
Build Author Chris Anderson Views 9134
Openbuilds Co2 80w Laser Cutter
Co2 80 watt openbuilds laser cutter, 1200mm laser tube, 1500x1000x500mm dimensions. Build frame first and then panels to be added.
Build Author Adam Filipowicz Views 21504
TITAN-XY (Fixed Build Plate, Quad Z Screw, CoreXY)
Super Rigid CoreXY 3D Printer
Build Author uwsdandt Views 3183
This is a build supported by Ooznest by a team of girls in Year 8 (12/13 years old) to machine model F1 cars for the F1 in Schools competition.
Build Author Midgetmountain Views 12193
The aim of this OpenBot build, was to make a 3d Printer that was easy to build with minimal tools and using of the shelve parts from Openbuilds.
Build Author James Gao Views 12651
An OX-inspired mini desktop mill. Designed in OpenSCAD, these parts are fully parametric and can be customized to your liking.
Build Author Metalguru Views 2363
C-Beam XL with Aluminum Bed
C-Beam XL with v-slot aluminum bed for fixturing.
Build Author EvanBruner Views 8096
Vertek CNC - 1000mm x 750mm Linear Rail on C Beam
C beam gantry with steel guide rails!
Build Author dougsnash Views 26448
Rotary Axis OX Derivitive
A Rotary Axis CNC router based on the OX CNC Router
Build Author Tweakie Views 13162
Tool position setting Part II.
The method used for tool position setting is a matter of personal choice but this is what I do.
Build Author dcorb Views 11657
Steel Frame CNC Router
A scratch built steel frame CNC Router.
Build Author JOSH.PIERCE Views 16437
CoreXY W/ Fixed Build Plate & Enclosure
Building a Core XY printer with a fixed build plate from off the shelf parts.
Build Author winand Views 13014
YAOR (Yet Another Openbuilds Router)
Yet Another Openbuilds Router, my version :-)
Build Author Keith Davis Views 12548
A Cartesian printer using bushings for the Z axis instead of wheels or linear bearings. The design also synchronizes two Z axis screws with a timing belt for a level lift. The ratio of the drive pulley and Z axis pulleys produce .005 lift per full step on a 200 step motor, eliminating layer resolution "drift" caused by microstepping.
Build Author runninfarmer Views 19428
Build Author Matt Nelson Views 5785
I'm building an OX CNC router. It will be the larger size of 750x 1000mm. This should give me a working area of about 22"x30".
Build Author Makerparts Views 6339
Makerparts.ca Prusa i3Pro 300
Concept for a Prusa i3 made from Cbeam Extrusion. X & Y using GT2 Belts, Z using Acme Screws Goal is to build a simple. and very Solid Printer Single Z Motor to keep the Z Screws in Sync. (Might require Geared Nema 17) 12" x 12" x 12" Build volume Nema 17's
Build Author openhardwarecoza Views 20776
Plasma cutter - 608 on steel tube version
CNC Plasma cutter: 608ZZ on steel square tube linear rollers Welded frame HDT2-15 Belt Drive Tradeweld Cut-40 Plasma cutter with converted hand torch Virtual Torch Height Control through inductive probing - open source electronics project
Build Author Peter Oakes Views 18072
The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build
I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.
Build Author John Mueller Views 10182
Small Mill type CNC machine, using C-Beams and V-Slot rail, bundle packs as a starter point. I needed a smallish desktop machine to fit a pretty narrow use case for my business, but the machine itself has larger applications to the OB community. Currently I will run the Dewalt 611 router on the Z axis, but have plans to add in a brushless RC style motor. So this design does have room to go either way easily.
Build Author P. ry Views 8272
Nox 1500mm x 1500mm C-Beam
C-Beam build using a double C-Beam for the X axis. 1500mm x 1500mm
Build Author AK-Creation Views 2222
Reference sensor for CNC Tools
For the x and y Axis you set the zero point with a limit switch, but how can you get the zero position for the z Axis? You have different thickness of material to mill and when you change the tool, you have also a other z Axis positon. With the Sensor, you can define the zero position of the piece automaticly.
Build Author Tweakie Views 18849
Software speed control of a brushless dc (Bldc) motor from Mach3.
Although this build is typically Mach3 related there is no reason it cannot be adapted for use with any machine control software which provides a PWM spindle control output. As an addition, an option has now been added which will enable the interface to manually control outrunner speed without the need for a PWM signal.
Build Author AK-Creation Views 10773
Designer Jeans with a Laser
I install the third extension on my cnc router and ask me, what can I do with a laser? So I make some test and find out - >>It is possible to engrave jeans clothes<<. Create your own Designer Jeans with a Laser!
Build Author UltiBots Views 10318
UltiBots CB3030 CNC Router
The UltiBots CB3030 CNC uses C-Beam, V-Slot and an extruded aluminum T-Slot work table. This allows 6mm T-Nuts, step clamps and blocks to secure materials to the work surface. The all metal design makes the use of a mister possible.
Build Author Mark Carew Views 17600
V-Slot Miter Saw Stop
A quick and simple saw stop build.
Build Author PhotoSgt85 Views 5258
C-Beam Machine XL
Overview of my experience building the C-Beam Machine XL from OpenBuilds, along with updates as I move along and get it going. My application is for creating plates needed for lab functions, 19 rack bay covers, and whatever else arises.
Build Author maverickccie Views 4604
D-BOT With Mods
What a way to learn about 3D printing
Build Author Keith Davis Views 11491
Combines the layout factor of a CoreXY while using Cartesian logic. The design has a fixed build plate - moving an X/Y frame on the Z axis enclosed by an outer main frame.
Build Author Mark Carew Views 38492
V-Slot™ Belt & Pinion Example Build
The OpenBuilds team has redefined the belt and pinion concept. By using standard OpenBuild components were able to improve on this system in ways that will save on cost and enhance its engineering capabilities.
Build Author Johnnycatt Views 12655
Lathe 4" x 40"
This is a lathe. I do not plan on making parts for NASA, but I want to be able to turn, face and bore things like wood, brass, aluminum and plastics.
Build Author Slewratesarego Views 11864
The RAT. A form ply and aluminium hybrid.
A hybrid of form ply and aluminium. 835x1260x100mm working envelope.
Build Author Ariel Yahni Views 7998
Modifying the K40 laser cuter stock gantry in favor of OpenBuilds superior and smoother movement. Also will provide me a better level control for easier beam alignment.
Build Author Filipe Jose Views 12639
The name of the printer is G&C Printer from Good & Cheap Printer. My goal was to design an printer that was good print quality and was cheap. The total cost of the printer is about 490€.
Build Author Dexter Oddwick Views 2017
Black Rabbit 1500
This is a router that I designed that is loosely based on the Openbuilds Ox, but designed to be heavy duty, rigid, and yet quick and agile.
Build Author Joe 90 Views 3817
Schematix OX metal build
OX metal build from an noob
Build Author mytechno3d Views 8385
Plasma cutting table
This is our plasma cutting table , based on the famous OX CNC . Can cut up to 15 mm ( steel , stainless , aluminium ) with a really good accuracy and at a really high speed .
Build Author UltiBots Views 21635
Mini Kossel V-Slot 3D Printer
This build is very straight forward. The design is simple. There is a great support community for Delta 3D printers.
Build Author Steve B Views 10626
OX PPR - Portable Plasma/Router
PPR = Portable Plasma/Router. A ~30x30"work area with leadscrews. Work surface is below support members. Can be placed ONTO cutting surface.
Build Author SlyClockWerkz Views 10770
1000mm X 1500mm OX CNC -- Fiber/Garolite
Building the full size OX.
Build Author Jon Norris Views 8510
I'm building a machine specifically for doing 4th axis work on woodwind instruments.
Build Author Iwan Müller Views 3824
This is a machine to trim and horizontal cutting hedges.
Build Author north90 Views 6800
OpenSampler: OpenSource autosampler for use in laboratory
An open source autosampler to be used in laboratories for the automated analysis of gas or liquid samples.
Build Author Keith Davis Views 5421
This is a simple, yet rugged design, weighing only 6 lbs and with 13x13x14" volume with a 8x8x6" build area. While assembly is pretty simple, the small size and rigidity of the design make shipping assembled printers attractive.
Build Author anigeek65 Views 11150
OX Super "C" - Cpmpleted 11/02/16
This CNC utilizes the C-BEAM extruded aluminum for the "X", "Y", and "Z" axis. The gantry will move similar to the OX along with the "Z" except I am incorporating the C-BEAM instead of the 20x60 V-RAIL. To make the system as strong as possible I am using two C-BEAM rails back to back. The "Y" axis will encompass two sets of roller on both side of the C-BEAM extruded rails for added strength. All of the plates for this were created using the C-BEAM machine I completed several month ago.
Build Author mytechno3d Views 16638
A low cost and easy to build laser cutter based on 2.8w laser diode .