Welcome to Our Community

Unlock hidden features. Sign Up for Free Today!

InDoreXY

Apr 16, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

A Large CoreXY build that can just barely get in through a doorway, aiming for under $1000. Build Volume approximately 18in x 24in x 26in.

Solid basics CNC router

May 26, 2017 at 2:25 PM
Category
Other Style CNC Mills
Build Progress
Build in Progress...

This build focuses on the basics to provide a good foundation to further enhance the ability to achieve tight tolerances

Salmon Sphinx 1.0

May 26, 2017 at 11:09 AM
Category
Cartesian Style CNC
Build Progress
Build in Progress...

A tribute build based on Kyo's wonderful CBeam Sphinx. My hope is to improve on that build slightly, but to be honest, I'll probably just screw it up. I'll use this build to publicly document my failures.

Dragon Plasma cutter

May 11, 2017
Category
Plasma Cutter Builds
Build Progress
Build in Progress...

Inspired by MetalGuru's idea : The plasma too cutter . If you have to cut small to medium sheet of steel with a plasma , this build may be for you

Openbuilds C-beam

May 24, 2017 at 5:21 PM
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This is a build supported by Ooznest by a team of girls in Year 8 (12/13 years old) to machine model F1 cars for the F1 in Schools competition.

OX CNC Router

Apr 28, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Ca fait 2 ans que je rêve d'une Fraiseuse CNC. Ni trop grande ni trop petite, sans avoir le budget pour en acheter une toute faite. Je suis artisan menuisier ébéniste et j'ai finalement décidé de la construire. Le projet OX m'a séduit, alors je me lance.

M3D Squared

May 23, 2017 at 6:42 PM
Category
Cartesian Style Bots
Build Progress
Build in Progress...

A cartesian build with a build dimension of 200x200x750mm. I will be using a dual extruder, heated build plate, and a screw drive for the z axis.

Stainless OX

May 22, 2017 at 4:11 PM
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Large format 1200X1500mm OX Build using Stainless Steel plates, dual belt configuration. Limit switches is a mix of micro switches and NPN Proximity switches. Electronics based on parallel break out board, Long Motor Stepper drivers (Chinese stuff) and motors controlled by Mach3. Spindel will be Kress 1050.

Openbuilds Co2 80w Laser Cutter

Apr 28, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Co2 80 watt openbuilds laser cutter, 1200mm laser tube, 1500x1000x500mm dimensions. Build frame first and then panels to be added.

FFF 3D printer 2x2x2m

Apr 24, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

The 3D printer will be able to print 2x2x2m components and not just in PLA or ABS. It's not just a DIY printer but I'm trying to apply engineering formulas to make it. I'm going to apply the state of art for 3D printing and scannering existing.

CNC Control Box with VFD etc etc

May 19, 2017
Category
Everything Else
Build Progress
Build in Progress...

I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.

C-Beam based modular Resin Printer

Aug 10, 2016
Category
Resin Style Bots
Build Progress
Build in Progress...

The build is based on a 500mm C-Beam and the SeeMeCNC FlexVat. The C-Beam is both the linear motion and a structural element of the design. The frame that holds the 45 degree first surface mirror and the build vat can slide up and down the C-Beam to accommodate projectors with lenses at different elevations.

Dogmeat's Custom C-Beam XL

Apr 21, 2017
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

I love the C-Beam XL concept, this build is my custom version with the goal of increasing rigidity for metal milling.

CoreXY Cubish

Aug 28, 2016
Category
H-Bot and Core XY
Build Progress
Build in Progress...

A dual extrusion CoreXY printer with a 290 X 290mm build volume built entirely out of 2020 aluminum extrusion and using openbuilds mini-carriages for motion.

LCD Based SLA Resin Printer

May 3, 2016
Category
Resin Style Bots
Build Progress
Build in Progress...

SLA resin printer based on a gen3/4 iPad Retina display. The design intent is to create a printer with the highest resolution possible with a lower cost of entry compared to DLP projector based SLA printers.

Table saw fence and guide

May 5, 2017
Category
Furniture Builds
Build Progress
Build in Progress...

The idea was to build a proof of concept table saw fence similar to a thru-rip or accusquare fences which retail for 400$, with the added option to motorize the positioning.

Mini D-Bot

May 11, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

A smaller version of a standard D-bot. Smaller to fit better in my workable area and to fit my vision for the printer.

CO2 Tube life expectancy experiment - Sponsored in part by Openbuilds

May 11, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Hypothesis - Running CO2 laser tubes at high amperage may shoirten tube life in number of hours, but will be made up for by the increase in actual inches engraved/cut using the higher power. This is a long term experiment, so the build status will remain as "Build in progress" until the experiment has been completed.

UK40OB

Oct 4, 2016
Category
Laser Cutter Builds
Build Progress
Build in Progress...

Modifying the K40 laser cuter stock gantry in favor of OpenBuilds superior and smoother movement. Also will provide me a better level control for easier beam alignment.

Warnke CNC Router

May 7, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

A blend of modular aluminum and steel bracketry built to yield fine cuts in hardwood and aluminum. An open table with a shiftable pin-fixture concept will allow the operator to shift longer than Y-travel work-pieces, such as doors, along the Y-axis of the table. This machine has a 44" (X) by 24" (Y) by 8" (Z) travel with water cooled VFD spindle motor, t-slot ext work table, cable carriers, side guards n dual y drives. Total weight (w/base-stand) is about 600lbs.

Lead Screw Driven Ox Derivative (850x1500)

Apr 26, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Another build based on the original OX design with a cutting area will be about 26" (680mm) x 50" (1300mm) and driven by lead screws.

CoreXY 3D build one

Apr 19, 2017
Category
3D PRINTER BUILDS
Build Progress
Build in Progress...

an 8020 build with 1010 extrusion (1") Square tubing Rough size is 24x24x36 (600x600x900) The expected usable print area 21.5x21.5X32"roughly (510x510x760) An XY 3D printer with 3 extruders and 3 Z-axis 0.9 degree motors the table (Z-AXIS) will lift up to the XY Carriage on 3 12mm linear rod and 3 8mm Lead screw's Corexy designs complete and Z-axis build is started don’t have a 3D cad system yet so building my prototypes on a pcb layout tool

DTG OX

Jan 29, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

From where Mark left off from the Ox build I am going to film the whole process of customizing the Ox.

SOLAC: Space Optimized LAser Cutter

Mar 9, 2017
Category
Laser Cutter Builds
Build Progress
Build in Progress...

The Space Optimized LAser Cutter is a 40 watt CO2 laser cutter that supports a maximum part volume of 24" x 16" x 6.25". It consists of a V-slot frame + brackets/mounts designed to be 3D printed on a consumer desktop printer. Total cost of the machine is ~ $1,400 USD.

1.4 meter tall build height, 300x410mm build plate cartesian

Mar 26, 2017
Category
Cartesian Style Bots
Build Progress
Build in Progress...

The original plan was to build a 3d printer with a 1200x1200 build platform with a 600mm build height. I was having issues getting ahold of a large enough borosilicate glass plate for the build so I decided to go for build height. I plan on using a smoothieboard for the controller. The build has currently slowed down. I was removing a broken drillbit from the linear rail mount, and it shattered and took out my eye. I am doing what I can when I can focus my eyes long enough for the build.

Ultimo

Jul 26, 2014
Category
Delta Mills / Stewart Platforms
Build Progress
Build in Progress...

Ultimo is the ultimate multi tool for the person who's serious about prototyping new ideas. A Delta Robot frame supports 3d printing up to 450mm in diameter, a powerful CNC Mill, and 50 amp plasma cutter for processing steel plate. And that's just a start.....wait till you see some of the other attachments we are currently working on incorporating.

Schreibotics Fabricator MkII

Apr 14, 2017
Category
Resin Style Bots
Build Progress
Build in Progress...

It all started after my prusa i3 build inspired me to experiment with resin 3D printers because I want to learn if they are worth it and if I can design my own printer.

Triple C-Bot

Aug 14, 2015
Category
3D PRINTER BUILDS
Build Progress
Build in Progress...

Based on the work of Carl Feniak and his C-Bot. A robust Core XY style 3D printer that has a clean parallel belt implementation and whose dimensions are adaptable to meet builder's needs. The use of open builds V-slot and other open hardware make customization easy. Utilizing a 300x300 build plate this derivation utilizes three lead screws, synced to a single motor via gt2 belt

Ox Stainless with ballscrews

Mar 8, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

Ox Stainless with ballscrews for motion, nema 23 steppers, LInuxcnc for control software. Using basic parts for frame from Makersupplies, and the rest sourced from ebay. Building a small router hoping it will be able to cut aluminum with decent results.

C-Beam Prefab Untitled

Sep 24, 2016
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The C-Beam Prefab Untitled is designed as the cartesian compliment to the C-Beam XL. With the exception of requiring a couple more 1000mm C-Beams and lead screws, the build requires a minimum of additional parts. The primary intention of the build is to maximize the cutting envelope while still staying within the sweet spot for C-beam rigidity. This design can easily be modified and allows for further custom structural components to be cut with the initial build platform.

WannaBe CNC - First time design and build

Apr 5, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

Design Change - Version 2.0 has a smaller foot print, custom gantry supports, and front and back covers. I will use standard V-Slot for gantry supports leaving me enough travel to manufacture the customer supports with this machine when completed. then update to final build. I also plan to install the controller into the front cover and power supply into the back cover. Should be nice and tidy.

C-Beam to C-Beam XL Upgrade

Dec 27, 2016
Category
X/Y Table Style CNC Mill
Build Progress
Build in Progress...

This is my first public build. Please be kind. We upgraded our C-Beam to the C-Cbeam X-Large. I want to give special thanks to Moag and the OpenBuilds team for making this happen.

Makerparts.ca Prusa i3Pro 300

Mar 12, 2016
Category
Cartesian Style Bots
Build Progress
Build in Progress...

Concept for a Prusa i3 made from Cbeam Extrusion. X & Y using GT2 Belts, Z using Acme Screws Goal is to build a simple. and very Solid Printer Single Z Motor to keep the Z Screws in Sync. (Might require Geared Nema 17) 12" x 12" x 12" Build volume Nema 17's

Stinger V Micro Mill

May 24, 2014
Category
Cartesian Style CNC
Build Progress
Build in Progress...

While building my OX AI I found myself with left over v slot and thought to myself, what do I need that I can build using them? Well since I make a lot of my own PCB boards for projects I figured a micro PCB mill would fit the bill ;) With inspiration from the OX and OX AI I give you the Stinger V :)

C-Beam Machine Build

Mar 13, 2017
Category
CNC ROUTER BUILDS
Build Progress
Build in Progress...

This is my first CNC router build. I want to gain basic CNC building experience so I can go on to build other items such as a frosting or pancake printer.

OX AI

Jan 24, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This will be an Aluminum OX build. Plates and all design credit goes to Mark from open builds. I may add my own touches but mainly this is to see how Aluminum plates perform

Live D-bot build at MRRF 2017 (Mar 25-26)

Mar 21, 2017
Category
H-Bot and Core XY
Build Progress
Build in Progress...

I will be attending the 2017 Midwest RepRap Festival (MRRF) with a small team of printer enthusiasts with a goal to fully assemble a Core-XY D-bot onsite during the event. This is our first attempt at building a D-bot and we will be learning things as we go. Our hope is to have the entire machine assembled, wired, and functional (at least to the setup and testing phase) before the end of the show. Please attend and watch us in person or visit our feed channel during/after the event.

Need a catchy name - enlarging CNC

Mar 27, 2017
Category
Cartesian Style CNC
Build Progress
Build in Progress...

The aim of this build is to have a CNC that can cut a FULL sheet of wood when I need it to, but also shrink down and cut smaller sheets the rest of the time. The prototype is based on an OX cnc but soon it will be completely custom using Openbuilds Parts

Sea-OX

Dec 29, 2015
Category
Cartesian Style CNC
Build Progress
Build in Progress...

This is my first CNC build. The Sea-OX is a machine built out of three 1000mm C-Beams. I plan to have a Y length of 1000mm and a X length of 650mm. The Z should have the ability to move approximately 100mm.

SCoreXY

Dec 7, 2016
Category
H-Bot and Core XY
Build Progress
Build in Progress...

Currently I have Velleman/3Drag K8200 modified and CNC machine self built and wanted to use both to make new 3D printer. After looking at different designs I liked Voron a lot and have decided to go that way. Currently I have ordered majority of parts and build shall start soon. I don't plan to rush it as I am usually 2 months home and 2 off.

Loading...
Loading Build images...
  • About Us

    The OpenBuilds Team is dedicated helping you to Dream it - Build it - Share it! Collaborate on our forums and be sure to visit the Part Store for all your Building needs!
  • Like us on Facebook

  • Support Open Source FairShare Program!

    OpenBuilds FairShare Give Back Program provide resources to Open Source projects, developers and schools around the world. Invest in your future by helping others develop theirs!

    Donate to FairShare!