Select a Category
Build Author gjwest Views 18436
Time Lapse Camera Rail
This is my first go at building a simple Time lapse camera rail system using as much pre-existing hardware and software as I could.
Build Author Mark Carew Views 31059
V-Slot™ X -Y Stage Hidden Acme Rod Example
An X-Y Stage created from two self contained acme screw linear actuators. This build was published as an example of how many of the OpenBuilds Parts can be used.
Build Author Mark Carew Views 44409
V-Slot™ Linear Actuator Build (Belt Driven)
Quick and Simple V-Slot Gantry System. This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts. You can mount this system an many ways so be sure to download the example models.
Build Author mytechno3d Views 6234
Cut To Length Machine
A Cut To Length machine controlled by computer
Build Author Iwan Müller Views 3494
This is a machine to trim and horizontal cutting hedges.
Build Author Mark Carew Views 16472
V-Slot Miter Saw Stop
A quick and simple saw stop build.
Build Author Mark Carew Views 35782
V-Slot™ Belt & Pinion Example Build
The OpenBuilds team has redefined the belt and pinion concept. By using standard OpenBuild components were able to improve on this system in ways that will save on cost and enhance its engineering capabilities.
Build Author Tweakie Views 17920
Software speed control of a brushless dc (Bldc) motor from Mach3.
Although this build is typically Mach3 related there is no reason it cannot be adapted for use with any machine control software which provides a PWM spindle control output. As an addition, an option has now been added which will enable the interface to manually control outrunner speed without the need for a PWM signal.
Build Author Rob Taylor Views 12855
DSLR Video Slider
A simple 1500mm V Slot camera slider for timelapse and possibly video with an Arduino Uno controlling a Pololu A4988 driving an OpenBuilds NEMA 17 stepper, and triggering the camera.
Build Author Mark Carew Views 38775
X Y Table OpenRail / V-Slot Build Examples
The X/Y table system is a great starting point for many CNC projects giving you the ability to move an object on the X and Y axis in a simple compact style.
Build Author Mark Carew Views 9087
V-Slot Modular Sit/Stand Desk
In this build we put together an awesome modular stand-up or sit down desk that is perfect of any home or office.
Build Author Mark Carew Views 25359
V-Slot™ Nema 23 Linear Actuator Build (Lead Screw)
Learn to build a super strong nema 23 lead driven linear actuator
Build Author Mark Carew Views 40944
C-Beam™ Linear Actuator Build
Here are a few helpful C-Beam actuator ideas that will help you get a start on your builds
Build Author The Dude Views 6990
Optical Limit + Home Switches
Optical home and limit switches for cnc, 3D printers, laser cutters, etc.
Build Author winand Views 2725
Small drill press fence
A small build using some small vslot scrap piece which shows the versatlity of the v-slot system
Build Author edward siegel Views 5335
cnc plasma table
ive got most of the wire harness made up too im using Chinese electronics for now I will upgrade later when this thing makes me some cash lol im using a ibm think center to case to hold my electronics ive got a 25' parallel cable to put some distance between the table and the computer
Build Author Cuong Vu Views 10672
Camera slider for stacking focus
This is just a small project to get use to the OpenBuild products.
Build Author Iwan Müller Views 1707
Controlbox for a CNC Router
A Controlbox for my CNC-Router, containing stepper-drivers, Planet-CNC MK3 Controller and a Controlpanel with joysticks.
Build Author The Dude Views 5568
Flexible Axis Revolving Tool-holder
Drag knife and pen holder which mounts in spindle collet.
Build Author rcKeith Views 11928
Hot Wire 4 Axis CNC Foam cutter
This build uses drawer slides and thread rod to create foam wings and fuselages by passing a hot wire through the foam which makes very accurate shapes. I built a Radio Controlled SuperVC10 using foam but did have a cnc machine then so I had to make many templates to guide the hot wire. This inspired me to build a cnc hot wire cutter. Works really well and have made several RC models with it now
Build Author north90 Views 6238
OpenSampler: OpenSource autosampler for use in laboratory
An open source autosampler to be used in laboratories for the automated analysis of gas or liquid samples.
Build Author wesner0019 Views 5564
HIGH POWER DC MOSFET (Relay)
High Power DC MOSFET
Build Author Jonathon Duerig Views 3094
CNC Glass Grinder
This is a 1-Axis CNC Glass Grinder. It uses a hobby grinder to miter a precise angle on the edge of a piece of glass.
Build Author Kyo Views 5225
V-Slot Cutting System
A System of 3d printed parts to use along with your projects aluminum extrusion to cut your pieces of v-slot to length manually.
Build Author Gerrald Views 1243
This build is to show what's possible as well with openBuilds! I use a single ArduinoMega and 5 separate stepper drivers (A4988). The LEDs are all NeoPixels. Collision 'detection' is all done within the code, so the endstops are only sensors I use in this build. I'm a self-employed video-artist and this is my first installation which just needs power and it runs (where I'm quite proud of). Normally my interactive installations take a long setup time, so this installation is a relief :)
Build Author Robert Hummel Views 7889
DIY anodizing power supply
How to make your own anodizing power supply on a budget
Build Author Makerparts Views 2129
Cbeam Digital Mitre Saw Fence
Work in progress.. but nearing completion :)
Build Author Tinker Views 3210
Kitchen Space Saver
The frame is made from all open builds parts, add the rubber feet and pads for the glass. The glass is clear 12" x 16" x 1/4" with a polished edge. A light basket slides on the countertop.
Build Author Gino Lanzi Views 779
2 GANTRY CNC HOTWIRE MACHINE
A 2 independent gantry affordable hotwire machine.
Build Author Jan Koeppen Views 2927
Touchsensor assembly machine
This is a handy machine to assemble touch sensors into display frame.
Build Author tonkajeep34 Views 10716
DIY GoPro Camera Slider
A compact portable DIY camera slider for time lapse photography using a GoPro.
Build Author AK-Creation Views 4688
Controll Board for CNC Projects
The Echinus Team change the Firmware from "Teacup" to "Marlin". I use this board in my 3D Printer and it works very good! So I write a short report.
Build Author Tweakie Views 3318
A little project for a rainy day which some, like me, may find useful.
Build Author Bridge Port Views 2105
CNC Line Boring Machine
This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.
Build Author Jonathon Duerig Views 1806
Archivist Quill Book Scanner
This is a book scanner built out of aluminum extrusion. It is designed to get high quality scans without harming the book. It is not automated. You still have to turn the pages yourself.
Build Author MTO Views 5604
Making a bellows to cover a C-beam to prevent swarf from gumming up the works.
Build Author sausagePaws Views 31160
Embroidery machine with XY belt and pinion drive.
A simple Embroidery machine using an XY belt and pinion drive to drive a hoop under a standard sewing machine. Needle timing, machine power and stepper control are all provided by a PIC processor. A tablet provides the higher level formatting required for communicating with the PIC chip.
Build Author Robert Hummel Views 29269
890KV OX RC spindle
This build is intended as a light alternative to the Dremel rotary tool.
Build Author Michael Views 41573
CNC xPRO Driver
Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)
Build Author AK-Creation Views 7011
All in One Grill -Mangal Schaschlik Döner
I create for some Years this all in one Grill. This Grill is without wellding, only fixed with screws. My Grill is 5 years old and look so, as at the first day (no moving away). The drawings and discription (sorry only in German, but with some pictures) to Download as PDF file. The unwindings to Download as DXF and GEO (Trumpf Laser) file. Have fun to build and Grill
Build Author oni305 Views 32162
Laser Engraver Control Board + Inkscape extension
This is a PCB designed to control a laser Engraver CNC
Build Author Mohsen Abbasi Views 3400
Portable Foam Cutter
A portable foam cutter to make your forms everyware using a LiPo Battery.
Build Author John J Talavera Views 4844
CNC FOR EVERYONE, THE DUCK!
www.cncforeveryone.com. the Duck is something that i think would be helpful in my shop since we already do cold casting.
Build Author M^3 Views 8924
M Cubed 3 Axis Bluetooth CNC Controller
Low cost, Bluetooth enabled, 3 axis CNC controller. GRBL 0.9 compatible.
Build Author Ken376 Views 430
Welded project cnc first try
Kind of hard to see in this pic now lining up drive s and finishing framework
Build Author Savvas Views 795
CNC Control Box with VFD etc etc
I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.
Build Author wesner0019 Views 4251
12.5" x 12" Assembled Heated Build Plate
Custom build plate for 300mm x 300mm (12"x12"). The hole pattern is for the 20x60 V Slot
Build Author Maxime Favre Views 1092
Brewery tank supports
Trying to design modular and evolutive supports for my brewery tanks.
Build Author David Arroyo Views 6888
Using a Raspberry Pi, Arduino and a Protoneer CNC Shield to create an Open Source CNC router controller. It will be equipped with a touch screen to control the on board processor. The touch screen will run a user interface that has buttons for added functionality. There will be a camera for monitoring progress from inside my office. The control box will also feature a way to power the vacuum and spindle/router . I will also be able to monitor room temp as well as Pi CPU temps and averages.
Build Author Jose A. Molina Views 1892
Reborn as the Soccer Pitch for our Robot Spider Soccer game - Robotics/Maker Club Teaching Cart
The Soccer Pitch for our Robot Spider Soccer game
Build Author mytechno3d Views 1838
DSLR ( video ) motorized slider
In order to make some nice traveling video you need a slider .
Build Author Kyo Views 3731
A Workbench idea built from V-slot and openbuilds parts.
Build Author Sonny Lowe Views 1641
MakerSL MSL-7 Laser Cut Tape Dispenser
An easy simple Tape Dispenser, spawned out of necessity, and shared for the fun of it...
Build Author JoeH Views 3660
The COTSPnP pick-and-place machine (PnP) is used to place surface-mount devices (SMDs) onto a printed circuit board and was designed and built exclusively from off-the-shelf (COTS) components, predominantly sourced from OpenBuilds and Actobotics. Its intended use is prototyping and not high rate, high volume production and is capable of precisely placing parts as small as 0402 capacitors and resistors but more importantly, can precisely place components with lead spacing as small a 0.4mm.
Build Author Mark Carew Views 46395
V-Slot™ Mini V Linear Actuator Build
Learn to build the V-SLOT Mini V Modular linear Actuator System and create all kinds of cool machines!
Build Author snokid Views 3729
C-beam Camera slider
feel kind of bad calling this a build because of pretty much everything is off the shelf parts. I'm writing my own sketch right now for the motion but there is a version or 2 floating around on the net based of this design. I will post my code once it's done.
Build Author Anthony Bolgar Views 452
Air assist/fume collector for Diode Laser Engraver
This is a work in progress
Build Author cbordeleau Views 1530
Slider Levelling Platform
3d printed V-Slot Gantry Plate leveler.
Build Author robbell Views 7155
OX-Based Self-Contaned HVLP Spray Booth
A CNC HVLP spray booth based on OX.
Build Author john cuervo Views 6781
PROTODERA 5-axis CNC machine
We are a team representing private industry and public university all concerned about community. In the place i'm from we face problems related to prototyping industry, there's no accesibility to it, not because there is not machines to work with but the costs are really high if i want to make a single piece of any idea in order to develop a concept, our students get their degree but never were able to try any of the Hass or 3d systems machines available as it seems they need a PhD.
Build Author John J Talavera Views 4001
A simple low cost rotomolder.
Build Author Mark Carew Views 52425
V-Slot™ Nema 17 Lead Screw / ACME Driven Actuators
Example model of lead screw driven actuators for your next project!
Build Author Zenmaniac Views 2046
4-axis C-Beam Hot Wire Wing cutter
4-axis CNC Hot wire foam wing cutter
Build Author Edgar Robles Views 903
Sheethexapod works with basic mechanims as direct metal-metal links and joints, all movements can be done by a rc servomotor in this case towerpro model.
Build Author Jose A. Molina Views 2211
Remote Controlled Robot Spider(Teaching Tool)
This Project is meant to teach introductory robotics and arduino styled micro-controllers to HS and MS students.
Build Author cbordeleau Views 3016
OpenBuilds C-Beam Double Slider
This slider uses an 500mm OpenBuilds C-beam and the design is such that the effective length of the slider is slightly less then twice the length of the C-Beam. It can be used both motorized or not.
Build Author Mohsen Abbasi Views 3852
Foldable Rainwater Collector
Realisation of my idea about a foldable collector for rainwater, which is light and easy to make. People around the world need water and can collect rain water with this collector. I made it for syria and all too.
Build Author Rick 2.0 Views 346
Adjustable Router Guide Template
This project is an adjustable router guide template made with 20x60 V-slot. It was meant as a less expensive and more user friendly alternative to commercially available units.
Build Author Linkreincarnate Views 294
I have parts that are apparently not suited to a cnc router or a 3d printer. I am still trying to figure out what to make out of what I have,
Build Author Mohsen Abbasi Views 2446
True Human Prosthesis
Prosthesis is functionality and emotion!
Build Author Mohsen Abbasi Views 1714
For all other builders and robotic technies!
Build Author Venturebit Views 657
SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer
The whole system is powered by 12V / DC power. Process it into Pellets or Granules to use it with your 3D Printer or Filament Extruder. Our self-developed steppermotor Controls allows you to optimally adjust Feedrate for your Situation. Forward, Backward and Stop is integrated for easy operation. The Speed can be continuously regulated via rotary switch.
Build Author panmaneecnc Views 6058
PS2 Keyboard And SD Card G code sender For GRBL
Now test ready
Build Author lewac Views 4763
PnP 4 axis small/fast machine
You need some mechanical and electronic experience. This is NOT a novice undertaking! a familiarity with linux a plus (but not necessary). Basic woodworking and metal fabrication a big plus as well.
Build Author Rusticalmond Views 4738
CNC Hot Wire Cutter 4 Axis for Cutting Foam Wings
My build is to allow me to cut foam wings using CNC Hot Wire Cutter.
Build Author Ruslan Nasirov Views 4860
CNC Hotwire Foam Cutter
Here is my first ever CNC build. A CNC Hotwire Foam Cutter. I will update about achievements. I would love to read from you guys - advices, ideas. Especially regarding the electronics. I feel confident with the hardware part which I can't say about the electronics part.
Build Author kallibaba Views 2263
XY base for play with GRBL and vvvv
GRBL, vvvv, drawbot, penchanger, custom plates
Build Author oni305 Views 2489
An USB Pendant for LinuxCNC / Mach3
Build Author CreativeTools Views 3451
Universal stand-alone filament spool holder (Fully 3D-printable)
A practical rotating and stand-alone spool holder which fits any filament extrusion 3D-printer. Several base files provided which make it fit different extruded aluminium profiles.
Build Author Anthony Bolgar Views 1747
Spindle cooling setup
Cooling system for water cooled spindle.
Build Author René Felipe Viancos Views 2437
AVR SMD Daughter Board
SMD AVR Solderless Daughter Board
Build Author Mark Carew Views 3737
Work Bench Stand
Here is a nice little simple build that will help to free up some extra space on your work bench. If your like me you need all the room on your work station you can use, so this is great to have.
Build Author kallibaba Views 574
Linear Rail for Dobot Magician
This is a simpel build of a Linear rail for the Dobot Magician.
Build Author DIY3DTech.com Views 2852
3D Printer Leveler Made with Maker Rail
Leveling Platform / Stand 3D Printers
Build Author Mike Hake Views 61
Epoxy dispenser, to apply non-conductive epoxy to electronic board.
Epoxy dispenser, 2nd one, first one works great. Uses HMI to allow for operator to pull up files for different jobs. 9 prox sensors, Eot and home on all 3 axis. High quality nema23 motors with intergrated drives from applied motion. Uses programmable router for drives.
Build Author Sonny Lowe Views 2306
MakerSL MSL-8 OB Vise
Small Machining Vise designed around 20x80 Openbuilds Rail System
Build Author rusirius Views 7162
A CNC platform designed with swapable heads to do laser engraving/etching/cutting, routing and milling, as well as 3D printing.