Select a Category
Build Author MTO Views 572
V-Slot MAME cabinet
A minimalist MAME "cabinet" made from extrusion.
Build Author Mark Carew Views 52005
C-Beam™ Linear Actuator Build
Here are a few helpful C-Beam actuator ideas that will help you get a start on your builds
Build Author PhotoSgt85 Views 510
Modular Controller PCBs
This is a build still in the prototype stage. The initial design is being used to control a 4 axis sample change, but the PCBs when finalized will be able to be adapted as a convenient way to wire stepper (or eventually hybrid stepper) drivers to which ever controller you happen to be using. Current developments center around an Arduino Mega, although more interfaces are planned in the future. The main design centers around the use of Phoenix Connectors.
Build Author Mark Carew Views 42180
V-Slot™ Belt & Pinion Example Build
The OpenBuilds team has redefined the belt and pinion concept. By using standard OpenBuild components were able to improve on this system in ways that will save on cost and enhance its engineering capabilities.
Build Author Mark Carew Views 53175
V-Slot™ Linear Actuator Build (Belt Driven)
Quick and Simple V-Slot Gantry System. This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts. You can mount this system an many ways so be sure to download the example models.
Build Author Mark Carew Views 52652
V-Slot™ Mini V Linear Actuator Build
Learn to build the V-SLOT Mini V Modular linear Actuator System and create all kinds of cool machines!
Build Author Mark Carew Views 29738
V-Slot™ Nema 23 Linear Actuator Build (Lead Screw)
Learn to build a super strong nema 23 lead driven linear actuator
Build Author Mark Carew Views 59740
V-Slot™ Nema 17 Lead Screw / ACME Driven Actuators
Example model of lead screw driven actuators for your next project!
Build Author JimB828 Views 1359
Miter Saw Station
A Miter Saw station built using a Dewalt Miter Saw Stand and V-Slot extrusions.
Build Author kallibaba Views 5532
CNC Sand and Spraycalk drawmaschine
A little CNC Sand and Spraycalk drawmaschine More and details in the next weeks
Build Author Beam Views 2291
DIY Flywheel Camera Slider
My take on a non affordable slider.
Build Author Jens Grabner Views 1332
This calculator work inside with a spezail count format - Fraction as Mantisse + Dezimal exponent .. in summ 9 Byte.
Build Author Savvas Views 6238
CNC Control Box with VFD etc etc
I'm currently working on the CNC control box, before doing any future work on the CNC Mountain Machine. I want the controller to be future proof and as professional as I can manage. I am planning to use stepper drivers, PSU's, a motor contactor unit to turn everything on, as well as a VFD and proximity limits switches. Each video will document the process and steps involved in researching, designing, planning and assembling a controller. I am not a natural electrician so learning as I go.
Build Author Jinx117 Views 2362
V-Slot Linear Actuator Bundle
v-slot linear actuator build.
Build Author Marc Gingras Views 3003
Table saw fence and guide
The idea was to build a proof of concept table saw fence similar to a thru-rip or accusquare fences which retail for 400$, with the added option to motorize the positioning.
Build Author kallibaba Views 6416
Two color Drawmachine
GRBL, vvvv, drawbot, penchanger, custom plates
Build Author Jonathon Duerig Views 1934
Chrysalis: An Enclosure for TAZ 6 3d Printers
Aluminum-framed enclosure for TAZ 6 3d Printer made with Makerlink.
Build Author Peter Van Der Walt Views 1905
The Almost Perfect 3 Way Mitre (with MakerLinks)
A quick and easy way to make a 3-way mitered corner using MakerLinks
Build Author Peter Van Der Walt Views 2225
The Almost Perfect 3 Way Mitre (with Angle Corner Connectors)
A quick and easy way to make a 3-way mitered corner using Corner Connectors
Build Author MTO Views 1550
C-beam upgrades to my power tools
Just some repairs and upgrades to my drill press and mitre saw using c-beam.
Build Author 3D Meister Views 1440
Camera slider with rotation prototype
I made a cam slider prototype with adjustable rotation to get experience for my CNC milled slider in planing.
Build Author Robert Huxford Views 1250
High Intensity Dive Light
Long duration , high intensity SCUBA dive light using Li-Po 18650 batteries and advanced circuitry.
Build Author Anthony Bolgar Views 3352
Spindle cooling setup
Cooling system for water cooled spindle.
Build Author Don Crawford Views 2925
Table Saw Fence
Trying to build a low cost table saw fence using v-wheels
Build Author Anthony Bolgar Views 1704
Air assist/fume collector for Diode Laser Engraver
This is a work in progress
Build Author Makerparts Views 1737
DIY Multi Row Nodal Point Spherical Panorama Head
DIY Pano Head
Build Author Mike Hake Views 1255
Epoxy dispenser, to apply non-conductive epoxy to electronic board.
Epoxy dispenser, 2nd one, first one works great. Uses HMI to allow for operator to pull up files for different jobs. 9 prox sensors, Eot and home on all 3 axis. High quality nema23 motors with intergrated drives from applied motion. Uses programmable router for drives.
Build Author seedorff Views 1247
A simple made hideaway for ugly electronics
Build Author Anthony Bolgar Views 885
Clock repair stand
Open source clock movement stand
Build Author Michael Views 48727
CNC xPRO Driver
Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)
Build Author Gino Lanzi Views 2935
2 GANTRY CNC HOTWIRE MACHINE
A 2 independent gantry affordable hotwire machine.
Build Author Linkreincarnate Views 1152
I have parts that are apparently not suited to a cnc router or a 3d printer. I am still trying to figure out what to make out of what I have,
Build Author Rick 2.0 Views 1502
Adjustable Router Guide Template
This project is an adjustable router guide template made with 20x60 V-slot. It was meant as a less expensive and more user friendly alternative to commercially available units.
Build Author Ken376 Views 1038
Welded project cnc first try
Kind of hard to see in this pic now lining up drive s and finishing framework
Build Author kallibaba Views 1594
Linear Rail for Dobot Magician
This is a simpel build of a Linear rail for the Dobot Magician.
Build Author Venturebit Views 1534
SHRED-Buddy3D UPcycler - Open Source Multi Material Cutter&Pelletizer
The whole system is powered by 12V / DC power. Process it into Pellets or Granules to use it with your 3D Printer or Filament Extruder. Our self-developed steppermotor Controls allows you to optimally adjust Feedrate for your Situation. Forward, Backward and Stop is integrated for easy operation. The Speed can be continuously regulated via rotary switch.
Build Author Edgar Robles Views 1604
Sheethexapod works with basic mechanims as direct metal-metal links and joints, all movements can be done by a rc servomotor in this case towerpro model.
Build Author Jonathon Duerig Views 4431
CNC Glass Grinder
This is a 1-Axis CNC Glass Grinder. It uses a hobby grinder to miter a precise angle on the edge of a piece of glass.
Build Author Sonny Lowe Views 3689
MakerSL MSL-8 OB Vise
Small Machining Vise designed around 20x80 Openbuilds Rail System
Build Author Iwan Müller Views 2402
Controlbox for a CNC Router
A Controlbox for my CNC-Router, containing stepper-drivers, Planet-CNC MK3 Controller and a Controlpanel with joysticks.
Build Author Jose A. Molina Views 2552
Reborn as the Soccer Pitch for our Robot Spider Soccer game - Robotics/Maker Club Teaching Cart
The Soccer Pitch for our Robot Spider Soccer game
Build Author Jose A. Molina Views 3052
Remote Controlled Robot Spider(Teaching Tool)
This Project is meant to teach introductory robotics and arduino styled micro-controllers to HS and MS students.
Build Author Makerparts Views 3145
Cbeam Digital Mitre Saw Fence
Work in progress.. but nearing completion :)
Build Author mytechno3d Views 2703
DSLR ( video ) motorized slider
In order to make some nice traveling video you need a slider .
Build Author Maxime Favre Views 2120
Brewery tank supports
Trying to design modular and evolutive supports for my brewery tanks.
Build Author Bridge Port Views 3741
CNC Line Boring Machine
This is a CNC Line Boring Machine for our cabinet shop. It drills the holes every 32 mm for the adjustable shelf pins in the cabinet side pieces. I chose this option over purchasing a multi-head boring machine that requires 11 drill bits - Left & Right hand twist - that also requires a lot of strength to plunge that many drill bits into the wood to be drilled.
Build Author Zenmaniac Views 4693
4-axis C-Beam Hot Wire Wing cutter
4-axis CNC Hot wire foam wing cutter
Build Author Jonathon Duerig Views 4078
Archivist Quill Book Scanner
This is a book scanner built out of aluminum extrusion. It is designed to get high quality scans without harming the book. It is not automated. You still have to turn the pages yourself.
Build Author Gerrald Views 2412
This build is to show what's possible as well with openBuilds! I use a single ArduinoMega and 5 separate stepper drivers (A4988). The LEDs are all NeoPixels. Collision 'detection' is all done within the code, so the endstops are only sensors I use in this build. I'm a self-employed video-artist and this is my first installation which just needs power and it runs (where I'm quite proud of). Normally my interactive installations take a long setup time, so this installation is a relief :)
Build Author cbordeleau Views 5205
OpenBuilds C-Beam Double Slider
This slider uses an 500mm OpenBuilds C-beam and the design is such that the effective length of the slider is slightly less then twice the length of the C-Beam. It can be used both motorized or not.
Build Author Jan Koeppen Views 4498
Touchsensor assembly machine
This is a handy machine to assemble touch sensors into display frame.
Build Author cbordeleau Views 2498
Slider Levelling Platform
3d printed V-Slot Gantry Plate leveler.
Build Author Sonny Lowe Views 2571
MakerSL MSL-7 Laser Cut Tape Dispenser
An easy simple Tape Dispenser, spawned out of necessity, and shared for the fun of it...
Build Author David Arroyo Views 9683
Using a Raspberry Pi, Arduino and a Protoneer CNC Shield to create an Open Source CNC router controller. It will be equipped with a touch screen to control the on board processor. The touch screen will run a user interface that has buttons for added functionality. There will be a camera for monitoring progress from inside my office. The control box will also feature a way to power the vacuum and spindle/router . I will also be able to monitor room temp as well as Pi CPU temps and averages.
Build Author snokid Views 4778
C-beam Camera slider
feel kind of bad calling this a build because of pretty much everything is off the shelf parts. I'm writing my own sketch right now for the motion but there is a version or 2 floating around on the net based of this design. I will post my code once it's done.
Build Author Mark Carew Views 4734
Work Bench Stand
Here is a nice little simple build that will help to free up some extra space on your work bench. If your like me you need all the room on your work station you can use, so this is great to have.
Build Author DIY3DTech.com Views 3775
3D Printer Leveler Made with Maker Rail
Leveling Platform / Stand 3D Printers
Build Author Mark Carew Views 44275
X Y Table OpenRail / V-Slot Build Examples
The X/Y table system is a great starting point for many CNC projects giving you the ability to move an object on the X and Y axis in a simple compact style.
Build Author Rusticalmond Views 6066
CNC Hot Wire Cutter 4 Axis for Cutting Foam Wings
My build is to allow me to cut foam wings using CNC Hot Wire Cutter.
Build Author Mark Carew Views 34594
V-Slot™ X -Y Stage Hidden Acme Rod Example
An X-Y Stage created from two self contained acme screw linear actuators. This build was published as an example of how many of the OpenBuilds Parts can be used.
Build Author MTO Views 6578
Making a bellows to cover a C-beam to prevent swarf from gumming up the works.
Build Author rcKeith Views 16583
Hot Wire 4 Axis CNC Foam cutter
This build uses drawer slides and thread rod to create foam wings and fuselages by passing a hot wire through the foam which makes very accurate shapes. I built a Radio Controlled SuperVC10 using foam but did have a cnc machine then so I had to make many templates to guide the hot wire. This inspired me to build a cnc hot wire cutter. Works really well and have made several RC models with it now
Build Author robbell Views 8932
OX-Based Self-Contaned HVLP Spray Booth
A CNC HVLP spray booth based on OX.
Build Author Tinker Views 4515
Kitchen Space Saver
The frame is made from all open builds parts, add the rubber feet and pads for the glass. The glass is clear 12" x 16" x 1/4" with a polished edge. A light basket slides on the countertop.
Build Author winand Views 4118
Small drill press fence
A small build using some small vslot scrap piece which shows the versatlity of the v-slot system
Build Author Kyo Views 6205
V-Slot Cutting System
A System of 3d printed parts to use along with your projects aluminum extrusion to cut your pieces of v-slot to length manually.
Build Author JoeH Views 4510
The COTSPnP pick-and-place machine (PnP) is used to place surface-mount devices (SMDs) onto a printed circuit board and was designed and built exclusively from off-the-shelf (COTS) components, predominantly sourced from OpenBuilds and Actobotics. Its intended use is prototyping and not high rate, high volume production and is capable of precisely placing parts as small as 0402 capacitors and resistors but more importantly, can precisely place components with lead spacing as small a 0.4mm.
Build Author Mark Carew Views 18538
V-Slot Miter Saw Stop
A quick and simple saw stop build.
Build Author edward siegel Views 6227
cnc plasma table
ive got most of the wire harness made up too im using Chinese electronics for now I will upgrade later when this thing makes me some cash lol im using a ibm think center to case to hold my electronics ive got a 25' parallel cable to put some distance between the table and the computer
Build Author tonkajeep34 Views 11875
DIY GoPro Camera Slider
A compact portable DIY camera slider for time lapse photography using a GoPro.
Build Author rusirius Views 8453
A CNC platform designed with swapable heads to do laser engraving/etching/cutting, routing and milling, as well as 3D printing.
Build Author mytechno3d Views 7505
Cut To Length Machine
A Cut To Length machine controlled by computer
Build Author M^3 Views 10834
M Cubed 3 Axis Bluetooth CNC Controller
Low cost, Bluetooth enabled, 3 axis CNC controller. GRBL 0.9 compatible.
Build Author wesner0019 Views 5434
12.5" x 12" Assembled Heated Build Plate
Custom build plate for 300mm x 300mm (12"x12"). The hole pattern is for the 20x60 V Slot
Build Author wesner0019 Views 6207
HIGH POWER DC MOSFET (Relay)
High Power DC MOSFET
Build Author Robert Hummel Views 9377
DIY anodizing power supply
How to make your own anodizing power supply on a budget
Build Author john cuervo Views 8447
PROTODERA 5-axis CNC machine
We are a team representing private industry and public university all concerned about community. In the place i'm from we face problems related to prototyping industry, there's no accesibility to it, not because there is not machines to work with but the costs are really high if i want to make a single piece of any idea in order to develop a concept, our students get their degree but never were able to try any of the Hass or 3d systems machines available as it seems they need a PhD.
Build Author Mark Carew Views 10334
V-Slot Modular Sit/Stand Desk
In this build we put together an awesome modular stand-up or sit down desk that is perfect of any home or office.
Build Author Iwan Müller Views 4196
This is a machine to trim and horizontal cutting hedges.
Build Author René Felipe Viancos Views 2933
AVR SMD Daughter Board
SMD AVR Solderless Daughter Board
Build Author CreativeTools Views 4188
Universal stand-alone filament spool holder (Fully 3D-printable)
A practical rotating and stand-alone spool holder which fits any filament extrusion 3D-printer. Several base files provided which make it fit different extruded aluminium profiles.
Build Author oni305 Views 35715
Laser Engraver Control Board + Inkscape extension
This is a PCB designed to control a laser Engraver CNC
Build Author north90 Views 7256
OpenSampler: OpenSource autosampler for use in laboratory
An open source autosampler to be used in laboratories for the automated analysis of gas or liquid samples.
Build Author Kyo Views 4586
A Workbench idea built from V-slot and openbuilds parts.
Build Author gjwest Views 21774
Time Lapse Camera Rail
This is my first go at building a simple Time lapse camera rail system using as much pre-existing hardware and software as I could.
Build Author Ruslan Nasirov Views 6125
CNC Hotwire Foam Cutter
Here is my first ever CNC build. A CNC Hotwire Foam Cutter. I will update about achievements. I would love to read from you guys - advices, ideas. Especially regarding the electronics. I feel confident with the hardware part which I can't say about the electronics part.
Build Author Mohsen Abbasi Views 4085
Portable Foam Cutter
A portable foam cutter to make your forms everyware using a LiPo Battery.
Build Author Tweakie Views 19917
Software speed control of a brushless dc (Bldc) motor from Mach3.
Although this build is typically Mach3 related there is no reason it cannot be adapted for use with any machine control software which provides a PWM spindle control output. As an addition, an option has now been added which will enable the interface to manually control outrunner speed without the need for a PWM signal.
Build Author Rob Taylor Views 15573
DSLR Video Slider
A simple 1500mm V Slot camera slider for timelapse and possibly video with an Arduino Uno controlling a Pololu A4988 driving an OpenBuilds NEMA 17 stepper, and triggering the camera.
Build Author AK-Creation Views 8435
All in One Grill -Mangal Schaschlik Döner
I create for some Years this all in one Grill. This Grill is without wellding, only fixed with screws. My Grill is 5 years old and look so, as at the first day (no moving away). The drawings and discription (sorry only in German, but with some pictures) to Download as PDF file. The unwindings to Download as DXF and GEO (Trumpf Laser) file. Have fun to build and Grill
Build Author oni305 Views 3021
An USB Pendant for LinuxCNC / Mach3
Build Author AK-Creation Views 5423
Controll Board for CNC Projects
The Echinus Team change the Firmware from "Teacup" to "Marlin". I use this board in my 3D Printer and it works very good! So I write a short report.
Build Author panmaneecnc Views 7861
PS2 Keyboard And SD Card G code sender For GRBL
Now test ready
Build Author Mohsen Abbasi Views 2189
For all other builders and robotic technies!
Build Author Mohsen Abbasi Views 3030
True Human Prosthesis
Prosthesis is functionality and emotion!
Build Author Mohsen Abbasi Views 4863
Foldable Rainwater Collector
Realisation of my idea about a foldable collector for rainwater, which is light and easy to make. People around the world need water and can collect rain water with this collector. I made it for syria and all too.
Build Author Robert Hummel Views 31732
890KV OX RC spindle
This build is intended as a light alternative to the Dremel rotary tool.
Build Author John J Talavera Views 5516
CNC FOR EVERYONE, THE DUCK!
www.cncforeveryone.com. the Duck is something that i think would be helpful in my shop since we already do cold casting.
Build Author sausagePaws Views 35119
Embroidery machine with XY belt and pinion drive.
A simple Embroidery machine using an XY belt and pinion drive to drive a hoop under a standard sewing machine. Needle timing, machine power and stepper control are all provided by a PIC processor. A tablet provides the higher level formatting required for communicating with the PIC chip.