Build Author Schematix Views 69661
OX-Metal CNC Router Mill
The OX-Metal is based on the original OX CNC mill But with a few modifications and add-ons
Build Author Kyo Views 52870
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
Build Author Robert Hummel Views 45182
This will be an Aluminum OX build. Plates and all design credit goes to Mark from open builds. I may add my own touches but mainly this is to see how Aluminum plates perform
Build Author Martin.Barfoed Views 49759
Large format 1200X1500mm OX Build using Stainless Steel plates, dual belt configuration. Limit switches is a mix of micro switches and NPN Proximity switches. Electronics based on parallel break out board, Long Motor Stepper drivers (Chinese stuff) and motors controlled by Mach3. Spindel will be Kress 1050.
Build Author andrew Views 14192
This small desktop machine is built inside a 300mm cube of 20mm extrusion. Work area is 14cm by 14cm. I used 400 step nema17 motors all around.
Build Author alex_b Views 7684
RONIN OX | The G10/Carbon Fiber Hogger
The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.
Build Author Robert Bailey Views 22324
FRANKINATOR -- My CNC Router Built Around The C-Beam Rail
I started this build about 2 weeks after the c-beam hit the store. I purchased a single bundle and ordered a TinyG to run it. where I work I have Hardware, Software and Mechanical engineers and they all got sucked into my project. they want one to do prototyping at the office, once they see mine...
Build Author Neil Rosenberg Views 60935
The Frog: CNC Router
Frog CNC Router. Inspired by OX and "Routy". 24"x36" active working area, approx. 3" usable Z motion.
Build Author Slewratesarego Views 12225
The RAT. A form ply and aluminium hybrid.
A hybrid of form ply and aluminium. 835x1260x100mm working envelope.
Build Author Robert Hummel Views 18680
Stinger V Micro Mill
While building my OX AI I found myself with left over v slot and thought to myself, what do I need that I can build using them? Well since I make a lot of my own PCB boards for projects I figured a micro PCB mill would fit the bill ;) With inspiration from the OX and OX AI I give you the Stinger V :)
Build Author sebf34 Views 13181
OX Based cnc 3000 x 1500 Double belt
OX Based CNC
Build Author Giarc Views 20808
Lead Screw Driven Ox Derivative (850x1500)
Another build based on the original OX design with a cutting area will be about 26" (680mm) x 50" (1300mm) and driven by lead screws.
Build Author Frank Steinhauer Views 12507
Design of a multifunctional CNC machine.
Build Author ahayden Views 11467
C-Beam Prefab Untitled
The C-Beam Prefab Untitled is designed as the cartesian compliment to the C-Beam XL. With the exception of requiring a couple more 1000mm C-Beams and lead screws, the build requires a minimum of additional parts. The primary intention of the build is to maximize the cutting envelope while still staying within the sweet spot for C-beam rigidity. This design can easily be modified and allows for further custom structural components to be cut with the initial build platform.
Build Author Dollarz81 Views 5056
C-Beam XXLarge "Tank"
This is a modified build C-Beam XLarge. 1000mm C-Beam used for X and Y axis, and the Y Axis moves the X bridge, not the material being worked.
Build Author winand Views 13327
YAOR (Yet Another Openbuilds Router)
Yet Another Openbuilds Router, my version :-)
Build Author Rural Views 7525
Mechanically, a scaled up OX build (1500x1500). Electronically, GRBL on an Arduino and a gShield. From a software perspective, the focus is on useable open source software tool chains.
Build Author Savvas Views 9084
C-Beam Lead Screw CNC Mountain
I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.
Build Author Jake Fry Views 6740
Another (Mostly) Stock OX
For my first Openbuilds project, I decided to put together an OX CNC Router.
Build Author Said Views 9999
Here is my Project A CNC 3000 mm by 1500 mm, with a 2.2kW spindle collet ER25 and 4 stepper motor nema 23 425oz-in. The purpose being to have a large work surface for a minimum cost.
Build Author GinoTheCop Views 21603
Building a larger C-BEAM CNC Machine with no previous experience.
Build Author Jestah Views 4437
Small Red OX
A small router for thin plate stock
Build Author Maxime Favre Views 4557
SmoothiebrainZ CBeam Machine
Modded Plate maker with: Smoothiebrainz board and DQ542MA SN04 Endstops Modded Z axis Aluminium build plate and renforced Y axis Dust shoe
Build Author richthorn Views 5537
I have been looking for a good solid kit to build off of for some time and when I saw the Ox buildlog I knew I had to have one. Ordered most of the pieces from Open Builds and started planning. Had a nice gentleman named Chris cut the required plates from 6061 aluminum for me (he sells them on eBay now if you're interested) and got to work.
Build Author Brian Popp Views 10604
Salmon Sphinx 1.0
A tribute build based on Kyo's wonderful CBeam Sphinx. My hope is to improve on that build slightly, but to be honest, I'll probably just screw it up. I'll use this build to publicly document my failures.
Build Author Serge E. Views 44102
myOX : a 4' x 2' OX CNC with potential
This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM
Build Author Hackscribble Views 16263
1000mm x 750mm OX with some planned enhancements. My first venture into CNC.
Build Author John Meikrantz Views 7766
Another build based on the venerable OX. xPRO CNC controller, and a few extras.
Build Author skarab Views 9871
OX Fixed Dust Shoe
A simple fixed dust shoe for your OX.
Build Author Jasen Stengel Views 7258
GrOX (OX based router)
1000mm x 1500mm OX router using Openbuilds parts and plates by Chris Laidlaw
Build Author Hytech2k Views 13655
Florida Ox 2x4 Area 51 CNC Parts Original Build
2x4 Ox with Vac table
Build Author Julius Views 11585
OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative
1000x1000mm Ballscrew driven OX Derivative. Dewalt 611 spindle and TB6600 Drivers.
Build Author Laurence Carroll Views 7885
C-Beam Double X
Per the special notes its a variant of the C-Beam, Machine.... I have noticed that alot of people build a CNC router to cut parts for other larger CNC machines.. eg Delta Printers etc....plus this will enable me to cut parts for model RC plans UAV's etc...
Build Author SlyClockWerkz Views 11370
1000mm X 1500mm OX CNC -- Fiber/Garolite
Building the full size OX.
Build Author Justinat Views 3619
Router / Plasma Prototype Build
this is my first attempt at a CNC Table
Build Author UltiBots Views 11834
UltiBots CB3030 CNC Router
The UltiBots CB3030 CNC uses C-Beam, V-Slot and an extruded aluminum T-Slot work table. This allows 6mm T-Nuts, step clamps and blocks to secure materials to the work surface. The all metal design makes the use of a mister possible.
Build Author andrew Adsit Views 8618
OX Cable Management, Electronics Case, E-Stops
750mm x 750mm OX build, xPro V2 controller, 400W Spindle with PWM controller.
Build Author Robert.sims Views 9690
What I want to build is a unit to: rout wood, plastic and occasional aluminium . to be able to swap cutters. i.e. drragknife, laser, router, drill
Build Author Bear Views 7508
ANOTHER OX!~ Huge Thanks to Marc Carew and Open Builds. The primary reason I am building this CNC mill is to aid in my homemade snowboard creation. I am going to try and document as much of everything as I can and post it here to help others going a similar route. I know from past projects that taking the time to document each step can be tedious when you want to charge ahead but I will try! I hoping to get feedback on my design choices and set up as I am a complete newbie to CNC.
Build Author inhan Views 14935
openbuilds rovo c-beam (700*1000)(1000*1000)한국오픈빌드.
Open the build will create open and sharing. 오픈빌드는 만들고 오픈하고 공유합니다.
Build Author Chris Anderson Views 7120
An OX build - little large than specs and plates 3D printed
Build Author chenderson Views 4195
CRH C-BEAM Router, steel capable
C-beam based CNC router using mostly openbuilds parts.
Build Author yakecadi Views 3743
All directions to innovate
all directions to innovate
Build Author TahoeTim Views 8303
Long Ox with drop in table
This build is a modified Ox build. The long rails are 1000mm. My build includes a solid clamping table.
Build Author DazTheGas Views 13601
From where Mark left off from the Ox build I am going to film the whole process of customizing the Ox.
Build Author James Gao Views 13506
An OX-inspired mini desktop mill. Designed in OpenSCAD, these parts are fully parametric and can be customized to your liking.
Build Author DiggerJ Views 5097
Babe - The Big Blue (Laser) OX Build
A 1000 x 1500 OX build with the ability to router cut dovetails as well as laser engraving and light cutting.
Build Author d0rk1e Views 4847
OXford (OX fortified)
150x75 cm OX with additional Y axis supports and hopefully a working double belt system
Build Author Hisha Views 2175
A 1000mm x 1000mm Sphinx/R7 build.
Build Author Ronald van Arkel Views 10753
Routy GT2 300 BSX CNC Router
This is the first project that I would like to share with you. I know the build looks familiar and it is; it’s based on kram242´s Routy. Work area is 300*500*55 mm and is NEMA17/GT2 belt driven.
Build Author Jen Views 4471
My first OX build
This is the story of my experience building a 1000 x 750mm OOZNest OX CNC router
Build Author Bmoz Views 10183
Ox with Gecko Controller and CNC Linux
This build is the documentation of someone with no experience building the OX cnc machine with a Gecko G540 controller and CNClinux
Build Author adhd_nerd Views 6402
Standard OX Build
Build Author Paruk Views 13957
OX 1500 x 1000 mm
Build Author Chefson Views 7378
OX CNC Router
Ca fait 2 ans que je rêve d'une Fraiseuse CNC. Ni trop grande ni trop petite, sans avoir le budget pour en acheter une toute faite. Je suis artisan menuisier ébéniste et j'ai finalement décidé de la construire. Le projet OX m'a séduit, alors je me lance.
Build Author Giuliano M Views 10364
OpenBuilds OX 48x48 Aluminum
Variant on the OpenBuilds OX CNC Router, enlarged with 1500mm length beams for a cutting area of 48" x 48". Based on the original model, the larger of the two, with the addition of a third 20x60 beam on the gantry for strength. Estimated cost is around $1100, minus the router.
Build Author Steven Bloom Views 18100
This is my first CNC build. The Sea-OX is a machine built out of three 1000mm C-Beams. I plan to have a Y length of 1000mm and a X length of 650mm. The Z should have the ability to move approximately 100mm.
Build Author Dominic Ross Views 6192
Beaver's OX 1500
OX 1500mm x 1500mm w/1.5Kw Water Cooled Spindle & VFD ran by a Gecko G540 & Mach3
Build Author Jonathon Duerig Views 7782
Contrariwise -- A C-Beam Router
A C-Beam router made almost entirely of standard parts. Electronics include an xPro v2 board and NEMA 23 motors. Cuts are made with a small 300W DC spindle. A pressure foot is used to minimize the need for workholding.
Build Author pocovolvedor Views 2399
Soundproof case for Ox
Not much to say... Soundproofing box for noisy works... Build in MDF and 20 mm plexiglas. Very effective!!!
Build Author Pendragon Views 7875
A bigger OX. As this build is nothing new I will detail my build process, I am not an experienced builder, this will maybe help someone else. The size of the bOX will be 100cmx75cm. I will use aluminium plates, a tinyG, and most probably only open source / free software.
Build Author inhan Views 8137
OPENBUILDS Korea (ROVO 1000)
I am very grateful to Mark Carew with passion and imagination. Therefore, the machine is good, but making the website there too daedanhaeseo The end of the same either way to invisible homework. Thank you for allowing openbuilds team submitted to the challenge once again for those with a passion that I feel like in Korea, I want to be a great help.
Build Author Dave Hylands Views 5053
My build of the OX kit from SMW3D.com
Build Author Jesse Jenkins Views 6344
Hedron's build with Ooznest kit and Xylotex motors
A 3-axis flying gantry (4'x4') mechanical kit is assembled. A 3D printer is used to make cable chain for tidy and cheap wire management. A BeagleBone Black development platform with Machinekit software (LinuxCNC) is configured to control a Xylotex motor driver box connected to an Openbuilds Ox direct-drive pulley and belt motion system. A vacuum dust-collection system is designed, CNC-routed and installed. A steel table is made to mount the table onto.
Build Author mike125 Views 9872
Cheetah 1.1 CNC Router
I hope to have a working prototype built soon.
Build Author seedorff Views 2779
This is my OX. There are many like it, but this one is mine. My OX is my best friend. It is my life. I must master it as I must master my life.....
Build Author Catawissa_CNC Views 5304
Arctic Ox CNC Router
This is a cartesian CNC Router build that is based off the OX CNC build by Mark Carew. I am using Spark Concepts CNC xPro controller board and their 400w spindle kit.
Build Author Steve B Views 8456
A small, quiet and clean desktop CNC designed for fine cutting.
Build Author Mark Carew Views 81203
ROUTY CNC Router (V-Slot Belt & Pinion)
A cool little CNC router build that uses the V-Slot belt & pinion drive and stock parts.
Build Author Ryan Lock Views 74276
Ooznest OX CNC Machine
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
Build Author Mark Carew Views 663841
OpenBuilds OX CNC Machine
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
Build Author Hytech2k Views 58449
Area 51 CNC Parts F-117 CNC Gear Rack Drive System
This is my journey on building a rack and pinion Ox variant called the F-117 CNC.
Build Author Ronald van Arkel Views 25496
Routy GT2 290 BSX CNC Router, Low Cost and Good!
The Routy GT2 300 BSX CNC Router is a Low Cost CNC build. It performs the same as the larger Routy's from OpenBuilds but doesn't break the bank!
Build Author Apothus Views 4643
Sphinx rigid XL
Rigid variant of the C-Beam sphinx platform
Build Author IndyMaker Views 5105
Ooznest Ox with 3D Printed Gantry Plates
Ooznest Ox with gantry plates and end caps 3D printed in ABS rather than aluminum.
Build Author Motions Views 28408
Charging Ox CNC Machine
A heavily modified Ox CNC build to replace SO2.
Build Author rpagewood Views 7385
C-beam Router rack and pinion
I want build a frame that is as sturdy as possibility while at the same time keeping it as compact as possible. working area will be approx 1200mm x 600mm
Build Author DazTheGas Views 15478
Been using the Ox now since 2015, so decided I should move on to C-Beam :-)
Build Author Colin Russon Views 5635
Lead screw based Foam Cutter that can easily be adapted to full belt / pinion drive and to CNC.
Build Author dcorb Views 12393
Steel Frame CNC Router
A scratch built steel frame CNC Router.
Build Author evil2002usna Views 5001
Cheap Ballscrew Ox CNC Router.
Build Author Kjell Views 2905
1x1m Ooznest Ox
Building my first router and I choose the ooznest Ox since it looks to be the latest and greatest among routers.
Build Author Zootalaws Views 4325
This is a 1500 x 1500 Ox build
Build Author Headlodius Views 2006
My 1st C-Beam Router
Pretty happy with the build, had some difficulty with the software loading up the settings due to me using the wrong com.
Build Author Narvick Views 4692
CNC MILLING ROUTER
CNC MILLING ROUTER
Build Author Steve B Views 10975
OX PPR - Portable Plasma/Router
PPR = Portable Plasma/Router. A ~30x30"work area with leadscrews. Work surface is below support members. Can be placed ONTO cutting surface.
Build Author Garrettcompston Views 2339
My 2nd cnc build
My new build to upgrade from my worn out shapeoko
Build Author dcorb Views 3999
My Shapeoko Router build
I built this as it is a small portable design.
Build Author KBill Views 10040
1500x1000 (4x2) Router - OX derivative
OX build with 1.5m gantry the 1m deep table.
Build Author rcKeith Views 6627
Ooznest OX CNC Build
Ooznest OX CNC build
Build Author ACASTELLINI Views 4117
1500 x 1500 mm OpenBuild CNC
1500 x 1500 mm OpenBuild CNC
Build Author gavspav Views 4113
Ooznest build - 1500mm x 1000mm
Its the first build for me so its just the story of me attempting to build the kit and hopefully end up with something I can use. Hopefully without destroying anything or anyone.
Build Author ymilord Views 5325
Kyoujin Mk1 (C-Beam /w Rack & Pinion)
C-Beam based CNC with Rack & Pinion (for the X Axis) and lead screws (for the Y Axis)
Build Author schwabelectronics Views 2708
Vertical Drill Mill
Mill drill using a dremel and some 3d printed parts
Build Author Julius Views 5545
The "Hand" CNC (or OXCarve)
more to come, please follow along the journey!
Build Author gerard989 Views 4450
OpenBuilds CNC 500x500
Build Author inhan Views 3443
openbuilds rovo 1000mmx1000mm(rovo x)(korea)
Open build rovo 1000mm * 1000mm. (Rovo x ver) 20.06.2015 now in progress. rovo kit is the 10th product. 8th rovo 750,9 th rovo1000, 10th rovo x ver progress at the same time. 10th item is an aspect of 1000. It changes the size and z-axis has been up.
Build Author JP Warnke Views 5659
Warnke CNC Router
A blend of modular aluminum and steel bracketry built to yield fine cuts in hardwood and aluminum. An open table with a shiftable pin-fixture concept will allow the operator to shift longer than Y-travel work-pieces, such as doors, along the Y-axis of the table. This machine has a 44" (X) by 24" (Y) by 8" (Z) travel with water cooled VFD spindle motor, t-slot ext work table, cable carriers, side guards n dual y drives. Total weight (w/base-stand) is about 600lbs.
Build Author ChadRat6458 Views 3750
This is my first cnc router. I like the open builds concept. I bought parts when I had the money. It seems everytime i think i have all the parts, i find something I am missing. My controller won't be ready until the end of the month so I am in no hurry. I will add things that i find. Eager to make some saw dust.
Build Author BismarckDon Views 3428
Custom OX Build
Inspired by the original OX by Mark Carew, this is my Custom OX. Many small changes, additions, and upgrades. Build is in progress and this post will be updated regularly with photos. Enjoy!