Build Author Mark Carew Views 640786
OpenBuilds OX CNC Machine
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
Build Author Kyo Views 46936
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
Build Author Robert Hummel Views 44000
This will be an Aluminum OX build. Plates and all design credit goes to Mark from open builds. I may add my own touches but mainly this is to see how Aluminum plates perform
Build Author Schematix Views 60068
OX-Metal CNC Router Mill
The OX-Metal is based on the original OX CNC mill But with a few modifications and add-ons
Build Author GinoTheCop Views 20376
Building a larger C-BEAM CNC Machine with no previous experience.
Build Author Martin.Barfoed Views 47151
Large format 1200X1500mm OX Build using Stainless Steel plates, dual belt configuration. Limit switches is a mix of micro switches and NPN Proximity switches. Electronics based on parallel break out board, Long Motor Stepper drivers (Chinese stuff) and motors controlled by Mach3. Spindel will be Kress 1050.
Build Author Ryan Lock Views 71868
Ooznest OX CNC Machine
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
Build Author Mark Carew Views 79051
ROUTY CNC Router (V-Slot Belt & Pinion)
A cool little CNC router build that uses the V-Slot belt & pinion drive and stock parts.
Build Author ahayden Views 10982
C-Beam Prefab Untitled
The C-Beam Prefab Untitled is designed as the cartesian compliment to the C-Beam XL. With the exception of requiring a couple more 1000mm C-Beams and lead screws, the build requires a minimum of additional parts. The primary intention of the build is to maximize the cutting envelope while still staying within the sweet spot for C-beam rigidity. This design can easily be modified and allows for further custom structural components to be cut with the initial build platform.
Build Author Hytech2k Views 56977
Area 51 CNC Parts F-117 CNC Gear Rack Drive System
This is my journey on building a rack and pinion Ox variant called the F-117 CNC.
Build Author Robert Hummel Views 18322
Stinger V Micro Mill
While building my OX AI I found myself with left over v slot and thought to myself, what do I need that I can build using them? Well since I make a lot of my own PCB boards for projects I figured a micro PCB mill would fit the bill ;) With inspiration from the OX and OX AI I give you the Stinger V :)
Build Author Savvas Views 7974
C-Beam Lead Screw CNC Mountain
I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.
Build Author Metalguru Views 6954
Big Ox Heavy Duty
A Heavy Duty version of the standard Big Ox build.
Build Author beardyblair Views 10887
My build log of an adapted Sphinx design with additional height and a larger X and Y axis.
Build Author sebf34 Views 12295
OX Based cnc 3000 x 1500 Double belt
OX Based CNC
Build Author Hytech2k Views 13304
Florida Ox 2x4 Area 51 CNC Parts Original Build
2x4 Ox with Vac table
Build Author Motions Views 27932
Charging Ox CNC Machine
A heavily modified Ox CNC build to replace SO2.
Build Author Hackscribble Views 15667
1000mm x 750mm OX with some planned enhancements. My first venture into CNC.
Build Author Dollarz81 Views 4678
C-Beam XXLarge "Tank"
This is a modified build C-Beam XLarge. 1000mm C-Beam used for X and Y axis, and the Y Axis moves the X bridge, not the material being worked.
Build Author Serge E. Views 43265
myOX : a 4' x 2' OX CNC with potential
This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM
Build Author Brian Popp Views 6760
Salmon Sphinx 1.0
A tribute build based on Kyo's wonderful CBeam Sphinx. My hope is to improve on that build slightly, but to be honest, I'll probably just screw it up. I'll use this build to publicly document my failures.
Build Author Ronald van Arkel Views 7120
Promoveo Study Builds
Build Author Ronald van Arkel Views 25111
Routy GT2 290 BSX CNC Router, Low Cost and Good!
The Routy GT2 300 BSX CNC Router is a Low Cost CNC build. It performs the same as the larger Routy's from OpenBuilds but doesn't break the bank!
Build Author Silverrabbit2 Views 3660
Ooznest OX, Workbench, & Folding Table
An OX based unit with innovation surrounding it -- 9 drawers, workbench, folding CNC table, & portability.
Build Author Steven Bloom Views 17915
This is my first CNC build. The Sea-OX is a machine built out of three 1000mm C-Beams. I plan to have a Y length of 1000mm and a X length of 650mm. The Z should have the ability to move approximately 100mm.
Build Author James Gao Views 12932
An OX-inspired mini desktop mill. Designed in OpenSCAD, these parts are fully parametric and can be customized to your liking.
Build Author dcorb Views 11901
Steel Frame CNC Router
A scratch built steel frame CNC Router.
Build Author winand Views 13122
YAOR (Yet Another Openbuilds Router)
Yet Another Openbuilds Router, my version :-)
Build Author Matt Nelson Views 6128
I'm building an OX CNC router. It will be the larger size of 750x 1000mm. This should give me a working area of about 22"x30".
Build Author Peter Oakes Views 18972
The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build
I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.
Build Author Gary Caruso Views 10844
OX Heavy Duty Build
OX Heavy Duty, using Chrisclub plates, for 2080 X-Y and C-beam Z
Build Author UltiBots Views 10778
UltiBots CB3030 CNC Router
The UltiBots CB3030 CNC uses C-Beam, V-Slot and an extruded aluminum T-Slot work table. This allows 6mm T-Nuts, step clamps and blocks to secure materials to the work surface. The all metal design makes the use of a mister possible.
Build Author PhotoSgt85 Views 5495
C-Beam Machine XL
Overview of my experience building the C-Beam Machine XL from OpenBuilds, along with updates as I move along and get it going. My application is for creating plates needed for lab functions, 19 rack bay covers, and whatever else arises.
Build Author Slewratesarego Views 11996
The RAT. A form ply and aluminium hybrid.
A hybrid of form ply and aluminium. 835x1260x100mm working envelope.
Build Author Dexter Oddwick Views 2130
Black Rabbit 1500
This is a router that I designed that is loosely based on the Openbuilds Ox, but designed to be heavy duty, rigid, and yet quick and agile.
Build Author Joe 90 Views 4022
Schematix OX metal build
OX metal build from an noob
Build Author Steve B Views 10754
OX PPR - Portable Plasma/Router
PPR = Portable Plasma/Router. A ~30x30"work area with leadscrews. Work surface is below support members. Can be placed ONTO cutting surface.
Build Author SlyClockWerkz Views 10999
1000mm X 1500mm OX CNC -- Fiber/Garolite
Building the full size OX.
Build Author anigeek65 Views 11384
OX Super "C" - Cpmpleted 11/02/16
This CNC utilizes the C-BEAM extruded aluminum for the "X", "Y", and "Z" axis. The gantry will move similar to the OX along with the "Z" except I am incorporating the C-BEAM instead of the 20x60 V-RAIL. To make the system as strong as possible I am using two C-BEAM rails back to back. The "Y" axis will encompass two sets of roller on both side of the C-BEAM extruded rails for added strength. All of the plates for this were created using the C-BEAM machine I completed several month ago.
Build Author DazTheGas Views 14225
Been using the Ox now since 2015, so decided I should move on to C-Beam :-)
Build Author Giarc Views 19276
Lead Screw Driven Ox Derivative (850x1500)
Another build based on the original OX design with a cutting area will be about 26" (680mm) x 50" (1300mm) and driven by lead screws.
Build Author Julius Views 10891
OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative
1000x1000mm Ballscrew driven OX Derivative. Dewalt 611 spindle and TB6600 Drivers.
Build Author alex_b Views 7321
RONIN OX | The G10/Carbon Fiber Hogger
The Ronin OX is a dedicated fiber composite milling machine. I give a complete in-depth article on how to take a nearly stock OX build and easily turn it into something that can mill carbon fiber and G10 plate effectively and quickly.
Build Author Neil Rosenberg Views 59401
The Frog: CNC Router
Frog CNC Router. Inspired by OX and "Routy". 24"x36" active working area, approx. 3" usable Z motion.
Build Author pocovolvedor Views 2156
Soundproof case for Ox
Not much to say... Soundproofing box for noisy works... Build in MDF and 20 mm plexiglas. Very effective!!!
Build Author Jestah Views 4276
Small Red OX
A small router for thin plate stock
Build Author Jim F Views 2004
Basing this build on the C-Beam machine XL on the parts store, but added a few things to make it more like the C-Beam XXLarge "Tank" by Dollarz81. Going with the Dewalt 611 instead of a water cooled spindle at first. May change down the road. Using a Panucat Gradus M1 controller with BigFoot drivers.
Build Author Metalguru Views 2660
Custom black and red Big Ox
Build Author Ronald van Arkel Views 10505
Routy GT2 300 BSX CNC Router
This is the first project that I would like to share with you. I know the build looks familiar and it is; it’s based on kram242´s Routy. Work area is 300*500*55 mm and is NEMA17/GT2 belt driven.
Build Author IndyMaker Views 4486
Ooznest Ox with 3D Printed Gantry Plates
Ooznest Ox with gantry plates and end caps 3D printed in ABS rather than aluminum.
Build Author Steve B Views 8270
A small, quiet and clean desktop CNC designed for fine cutting.
Build Author inhan Views 14215
openbuilds rovo c-beam (700*1000)(1000*1000)한국오픈빌드.
Open the build will create open and sharing. 오픈빌드는 만들고 오픈하고 공유합니다.
Build Author Catawissa_CNC Views 1200
This build is based on the C-Beam build by Mark Carew. I have added axis limit switches and a remote mounted control cabinet. This build also uses a custom moveable table.
Build Author David the swarfer Views 8141
The Nguni - an OX variant
A modified OX with more X clearance, MDF plates, vacuum table
Build Author gazingm42 Views 2537
1000mm X 1000mm with tinyg
1000mm X 1000mm overhead cnc machine
Build Author Gabriel Faber Views 6686
After completing a standard OX build, I found I didn't have enough Z-clearance and designed a set of taller gantry plates
Build Author Jake Fry Views 6564
Another (Mostly) Stock OX
For my first Openbuilds project, I decided to put together an OX CNC Router.
Build Author Martin Skov Nielsen Views 2654
Stainless OX kit
This is a 1500 X 1500 Stainless OX kit build, by a cnc novice. It is the first cnc machine i have ovned and build I got this kit from http://makersupplies.dk/20-ox-cnc-kits
Build Author Jonathon Duerig Views 7413
Contrariwise -- A C-Beam Router
A C-Beam router made almost entirely of standard parts. Electronics include an xPro v2 board and NEMA 23 motors. Cuts are made with a small 300W DC spindle. A pressure foot is used to minimize the need for workholding.
Build Author andrew Views 13939
This small desktop machine is built inside a 300mm cube of 20mm extrusion. Work area is 14cm by 14cm. I used 400 step nema17 motors all around.
Build Author Robert.sims Views 9514
What I want to build is a unit to: rout wood, plastic and occasional aluminium . to be able to swap cutters. i.e. drragknife, laser, router, drill
Build Author Chris Anderson Views 6980
An OX build - little large than specs and plates 3D printed
Build Author chenderson Views 3663
CRH C-BEAM Router, steel capable
C-beam based CNC router using mostly openbuilds parts.
Build Author Motions Views 11540
Screaming Ox CNC Machine
Big brother of the Charging Ox CNC machine.
Build Author rpagewood Views 7187
C-beam Router rack and pinion
I want build a frame that is as sturdy as possibility while at the same time keeping it as compact as possible. working area will be approx 1200mm x 600mm
Build Author nate campbell Views 2629
CrOX Carbon Reinforced OX
Modified OX with carbon fiber reinforced X and Z axes. 1500mm Y, 1000mm X and 120mm Z clearence
Build Author TahoeTim Views 8191
Long Ox with drop in table
This build is a modified Ox build. The long rails are 1000mm. My build includes a solid clamping table.
Build Author DazTheGas Views 13176
From where Mark left off from the Ox build I am going to film the whole process of customizing the Ox.
Build Author Rural Views 7333
Mechanically, a scaled up OX build (1500x1500). Electronically, GRBL on an Arduino and a gShield. From a software perspective, the focus is on useable open source software tool chains.
Build Author Sonny Lowe Views 625
MakerSL MSL-21 OB Minimill Enclosure
Simple enclosure for the OB Minimill
Build Author Hisha Views 616
A 1000mm x 1000mm Sphinx/R7 build.
Build Author Jen Views 4118
My first OX build
This is the story of my experience building a 1000 x 750mm OOZNest OX CNC router
Build Author Bmoz Views 9826
Ox with Gecko Controller and CNC Linux
This build is the documentation of someone with no experience building the OX cnc machine with a Gecko G540 controller and CNClinux
Build Author adhd_nerd Views 6228
Standard OX Build
Build Author getoffmyland Views 8289
Water Buffalo - Water jet cut OX+
A modified OX based on Aluminum plates cut on a waterjet. Some new ideas and additions from other builds are included.
Build Author John Meikrantz Views 7586
Another build based on the venerable OX. xPRO CNC controller, and a few extras.
Build Author Jonathon Harms Views 1518
Schematix Ox-Metal Build
A build of Schematix's Ox-Metal design, with a 0.8kw watercooled spindle.
Build Author skarab Views 9483
OX Fixed Dust Shoe
A simple fixed dust shoe for your OX.
Build Author RandyF Views 1399
Large C-Beam Sphinx style CNC Build
Started my build of a large Sphinx style cnc Router. I wanted one to handle the Dollar Tree Foam Board (DTFB) so I am making this to handle 2' X 3'. This is my first endeavor for a CNC so I am learning as I go but there is one thing for sure.
Build Author mike125 Views 9719
Cheetah 1.1 CNC Router
I hope to have a working prototype built soon.
Build Author evildean Views 6158
OX-SUMO, SUMO-OX, OXSUMO?
One meter square. Short and stout.... reminds me of a Sumo Wrestler. A temporary and adjustable configuration I have devised to cut my own plates. I have kicked around ideas for about a year and the C-Beam extrusion has made this attempt to realize my ideas irresistible. This is just one step towards bigger and better things!
Build Author Laurence Carroll Views 7704
C-Beam Double X
Per the special notes its a variant of the C-Beam, Machine.... I have noticed that alot of people build a CNC router to cut parts for other larger CNC machines.. eg Delta Printers etc....plus this will enable me to cut parts for model RC plans UAV's etc...
Build Author andrew Adsit Views 8338
OX Cable Management, Electronics Case, E-Stops
750mm x 750mm OX build, xPro V2 controller, 400W Spindle with PWM controller.
Build Author JP Warnke Views 4837
Warnke CNC Router
A blend of modular aluminum and steel bracketry built to yield fine cuts in hardwood and aluminum. An open table with a shiftable pin-fixture concept will allow the operator to shift longer than Y-travel work-pieces, such as doors, along the Y-axis of the table. This machine has a 44" (X) by 24" (Y) by 8" (Z) travel with water cooled VFD spindle motor, t-slot ext work table, cable carriers, side guards n dual y drives. Total weight (w/base-stand) is about 600lbs.
Build Author Apothus Views 3559
Sphinx rigid XL
Rigid variant of the C-Beam sphinx platform
Build Author AndersFaust Views 6932
(R)OX CNC [FR/EN]
Another (R)OX CNC something like build, in French please ! Pics Heavy !
Build Author Robert Bailey Views 21974
FRANKINATOR -- My CNC Router Built Around The C-Beam Rail
I started this build about 2 weeks after the c-beam hit the store. I purchased a single bundle and ordered a TinyG to run it. where I work I have Hardware, Software and Mechanical engineers and they all got sucked into my project. they want one to do prototyping at the office, once they see mine...
Build Author drxlcarfreak Views 906
Project There is No Kill Like Overkill
Very stout 2'x4' machine with a deep Z axis
Build Author James Hayes Views 2548
Pure Cbeam 900x1000
This is a pure cbeam build to maximize envelope and rigidity. All the parts used are available from open builds.
Build Author nlfawcett Views 8397
Longhorn OX (Under Construction and In Progress)
I ran across the OX and knew it was the one I wanted to build. Some of the things I wanted to include was make it bigger and a little more solid than what the original plans called for. So here is where I am at so far. It will have a cutting area of 48" x 48". The waste board support frame will have more support rails. The Y axis will have (3) 20mm x 60mm rails instead of the original (2) that is called for. 1/4" aluminum OX plates. And a few more odds and ends.
Build Author Kermareg Views 12298
[EN] Build of my Multiple OX CNC. It's goal is to run in 2 differents modes : router and 3D printer modes. The router mode will allows the use of a laser diode or a standard spindle. [FR] Construction d'une CNC basée sur l'OX pour des usages multiples. Deux modes principaux sont prévus : l'impression 3D et l'usinage via une defonceuses. Le mode usinage permettra à l'avenir de placerune tête laser pour effectuer quelques gravures simples. Une version française : http://kermareg.be/?page_id=103
Build Author Giuliano M Views 10200
OpenBuilds OX 48x48 Aluminum
Variant on the OpenBuilds OX CNC Router, enlarged with 1500mm length beams for a cutting area of 48" x 48". Based on the original model, the larger of the two, with the addition of a third 20x60 beam on the gantry for strength. Estimated cost is around $1100, minus the router.
Build Author NJG Views 3442
1200 x 2700 CNC based on OX
Preliminary design for cnc based on OX for cutting wood sheet products (ply, MDF etc.) for a sheet size of 1200mm x 2700mm
Build Author Jasen Stengel Views 7056
GrOX (OX based router)
1000mm x 1500mm OX router using Openbuilds parts and plates by Chris Laidlaw
Build Author Jesse Jenkins Views 6155
Hedron's build with Ooznest kit and Xylotex motors
A 3-axis flying gantry (4'x4') mechanical kit is assembled. A 3D printer is used to make cable chain for tidy and cheap wire management. A BeagleBone Black development platform with Machinekit software (LinuxCNC) is configured to control a Xylotex motor driver box connected to an Openbuilds Ox direct-drive pulley and belt motion system. A vacuum dust-collection system is designed, CNC-routed and installed. A steel table is made to mount the table onto.
Build Author Frank Steinhauer Views 12363
Design of a multifunctional CNC machine.
Build Author ymilord Views 5017
Kyoujin Mk1 (C-Beam /w Rack & Pinion)
C-Beam based CNC with Rack & Pinion (for the X Axis) and lead screws (for the Y Axis)
Build Author Maxime Favre Views 4213
SmoothiebrainZ CBeam Machine
Modded Plate maker with: Smoothiebrainz board and DQ542MA SN04 Endstops Modded Z axis Aluminium build plate and renforced Y axis Dust shoe
Build Author BismarckDon Views 3277
Custom OX Build
Inspired by the original OX by Mark Carew, this is my Custom OX. Many small changes, additions, and upgrades. Build is in progress and this post will be updated regularly with photos. Enjoy!
Build Author Rwetzler Views 3742
This is a variant of a typical OX (Mark Carew inspiration) router using C-Beams/8mm Acme rods to drive all three axis. I went with a 1000mm x 1000mm frame size. Useable space is 28" (711mm) X 26" (660mm) with a Z axis work travel of approx. 3.25" (82.5mm). A TinyG is used as a controller along with Fusion 360/Chilipper as the software for generating and running gcode files.