Select a Category
Build Author JP Warnke Views 263
Warnke CNC Router
A blend of modular aluminum and steel bracketry intended to yield fine cuts in hardwood and aluminum. An open table concept with a shiftable pin-fixture will allow the operator to shift longer than Y-travel work-pieces, such as doors, along the Y-axis of the table. This machine when fully completed will have a 4' (X) by 2' (Y) by 1' (Z) travel with water cooled VFD spindle motor other cool stuff...I hope. Intentions to also keep it easy to disassemble and transport.
Build Author Mark Carew Views 564535
OpenBuilds OX CNC Machine
OpenBuilds OX CNC Machine. A strong easy to build shop CNC router that can be sized to suit your needs. Many new features have been incorporated into the OX to make it a great router that is sure to inspire!
Build Author adambrum Views 189
Slightly larger sphinx
Another C-Beam Sphinx but a little larger,
Build Author Paul Stoller Views 6033
C-Beam Machine - MyFirstCNC
This is my first foray into CNC machines, after much review I decided on the C-Beam machine as it seemed easy to work with and will enabled me to build more and larger machines as I gain knowledge. I am planning on building the machine largely unmodified from the reference design. I will be building the machine an axis at a time as I need to spread out costs over time.
Build Author Hytech2k Views 51174
Area 51 CNC Parts F-117 CNC Gear Rack Drive System
This is my journey on building a rack and pinion Ox variant called the F-117 CNC.
Build Author ahayden Views 7078
C-Beam Prefab Untitled
The C-Beam Prefab Untitled is designed as the cartesian compliment to the C-Beam XL. With the exception of requiring a couple more 1000mm C-Beams and lead screws, the build requires a minimum of additional parts. The primary intention of the build is to maximize the cutting envelope while still staying within the sweet spot for C-beam rigidity. This design can easily be modified and allows for further custom structural components to be cut with the initial build platform.
Build Author Mark Carew Views 94286
C-Beam™ Machine - Plate Maker
This C-beam Machine is an in affordable CNC plate maker and 3D carving machine!
Build Author Ronald van Arkel Views 6293
Upgrading the C-Beam machine
So we have new plates, stronger motors, belt drive reduction, but what should we do with them? In this article you might find the answer you were looking for as we took an “old” C-Beam machine and started to upgrade the X/Z body and added more torque and precision to the Z-axis.
Build Author PhotoSgt85 Views 2102
C-Beam Machine XL
Overview of my experience building the C-Beam Machine XL from OpenBuilds, along with updates as I move along and get it going. My application is for creating plates needed for lab functions, 19 rack bay covers, and whatever else arises.
Build Author Kyo Views 25899
A strong desktop cnc router that will enable you to make larger aluminium plates without taking up to much room. Simple, strong and opensource ! Build one today..
Build Author DazTheGas Views 11516
Been using the Ox now since 2015, so decided I should move on to C-Beam :-)
Build Author RandyF Views 550
Large C-Beam Sphinx style CNC Build
Started my build of a large Sphinx style cnc Router. I wanted one to handle the Dollar Tree Foam Board (DTFB) so I am making this to handle 2' X 3'. This is my first endeavor for a CNC so I am learning as I go but there is one thing for sure.
Build Author Ronald van Arkel Views 5596
Promoveo Study Builds
Build Author Metalguru Views 1400
C-Beam XL with Aluminum Bed
C-Beam XL with v-slot aluminum bed for fixturing.
Build Author Giarc Views 10926
Lead Screw Driven Ox Derivative (850x1500)
Another build based on the original OX design with a cutting area will be about 26" (680mm) x 50" (1300mm) and driven by lead screws.
Build Author Serge E. Views 38565
myOX : a 4' x 2' OX CNC with potential
This is the story of me building myOX - my version of the "ideal" OX. I want a machine which can route/mill at least 4' wide and as long as I can feed through (don't be shy, think "infinity") as well as going deep on multiple faces - manual 4th axis. I have loads of ideas to take myOX towards that goal and way beyond. Time will tell. Just follow along through this build and possibly a few others along the way ... Check out my OXCalculator : let your computer figure out your BoM
Build Author skarab Views 7828
OX Fixed Dust Shoe
A simple fixed dust shoe for your OX.
Build Author Savvas Views 6515
C-Beam Lead Screw CNC Mountain
I’m making a desktop CNC machine based on the C-Beam platform. It will be driven by Tr8 Lead Screws, and initially made from 12mm birch ply plates.
Build Author Larry_AK Views 6198
Pretty much a straight OPENBUILDS OX that slowly getting some modifications.
Build Author sebf34 Views 7553
OX Based cnc 3000 x 1500 Double belt
OX Based CNC
Build Author EvanBruner Views 6417
Vertek CNC - 1000mm x 750mm Linear Rail on C Beam
C beam gantry with steel guide rails!
Build Author Gary Caruso Views 1347
OX Heavy Duty Build
OX Heavy Duty, using Chrisclub plates, for 2080 X-Y and C-beam Z
Build Author Dollarz81 Views 2016
C-Beam XXLarge "Tank"
This is a modified build C-Beam XLarge. 1000mm C-Beam used for X and Y axis, and the Y Axis moves the X bridge, not the material being worked.
Build Author GinoTheCop Views 12851
Building a larger C-BEAM CNC Machine with no previous experience.
Build Author Schematix Views 29337
OX-Metal CNC Router Mill
The OX-Metal is based on the original OX CNC mill But with a few modifications and add-ons
Build Author Jonathon Duerig Views 4515
Contrariwise -- A C-Beam Router
A C-Beam router made almost entirely of standard parts. Electronics include an xPro v2 board and NEMA 23 motors. Cuts are made with a small 300W DC spindle. A pressure foot is used to minimize the need for workholding.
Build Author Martin Skov Nielsen Views 1199
Stainless OX kit
This is a 1500 X 1500 Stainless OX kit build, by a cnc novice. It is the first cnc machine i have ovned and build I got this kit from http://makersupplies.dk/20-ox-cnc-kits
Build Author MattiasN Views 14294
MyCNC(1000mm x 1500mm)
My CNC project
Build Author gavspav Views 2982
Ooznest build - 1500mm x 1000mm
Its the first build for me so its just the story of me attempting to build the kit and hopefully end up with something I can use. Hopefully without destroying anything or anyone.
Build Author Moag Views 21834
C-Beam Machine XLarge
A rigid and wide format, plate and carving CNC.
Build Author SBLabs Views 2087
C-Beam to C-Beam XL Upgrade
This is my first public build. Please be kind. We upgraded our C-Beam to the C-Cbeam X-Large. I want to give special thanks to Moag and the OpenBuilds team for making this happen.
Build Author sgspenceley Views 44710
Linear Rail CNC Machines
A CNC build using linear rails & lead screws.
Build Author ANDRESCAMPA Views 638
SUPER OX NEMA 34 1600 OZ Motors!!!
CNC OX 1500X3000
Build Author Ryan Lock Views 56389
Ooznest OX CNC Machine
The Ooznest OX CNC Machine Kit is based on the OX CNC Machine designed by Mark Carew, and it incorporates many upgrades from this community. The plate designs in our kit are based on the originals. However we have added our own touches to increase the performance and design of the machine. To complement Mark's build videos, we have made a complete written instruction manual, with IKEA'eske assembly diagrams.
Build Author beardyblair Views 4439
My build log of an adapted Sphinx design with additional height and a larger X and Y axis.
Build Author Glenn Weston Views 6309
"The Moagie Mill" My C-Beam XLarge
My Experiences building the C-Beam X Large. Maybe you can pick up a few pointers from my ramblings and experiences if you are considering building this machine.
Build Author cureac Views 6754
CNC Rotary Table Rotational Axis, A Axis B Axis 4th 5th Axis CNC Dividing Head
This is my first major project.
Build Author Mark Carew Views 71767
ROUTY CNC Router (V-Slot Belt & Pinion)
A cool little CNC router build that uses the V-Slot belt & pinion drive and stock parts.
Build Author Steven Sampson Views 4866
A CNC router designed to handle a 4'x8' sheet, for as close to $2000 as possible. The price barrier resulted in my choice to use timing belts rather than leadscrews or rack&pinion. Build List still being updated
Build Author Jonathon Harms Views 479
Schematix Ox-Metal Build
A build of Schematix's Ox-Metal design, with a 0.8kw watercooled spindle.
Build Author Jim_H Views 2644
Jim's C-Beam Machine Build
This machine is fantastic. Teamed up with Fusion 360, Inkscape, and GrblPanel, I'm well on my way towards making at least one Christmas gift this year. I had some frustrating times during the build, mainly with getting everything to go together square, but overall it was fun. I can see that I'm going to need to be a bit creative in order to max out the work area for this machine so that I can produce the product I bought it for, but it will be able to do so much more for me as well.
Build Author Martin.Barfoed Views 38191
Large format 1200X1500mm OX Build using Stainless Steel plates, dual belt configuration. Limit switches is a mix of micro switches and NPN Proximity switches. Electronics based on parallel break out board, Long Motor Stepper drivers (Chinese stuff) and motors controlled by Mach3. Spindel will be Kress 1050.
Build Author RSW Views 520
RSW's C-Beam Build
I built a CNC Router using 3/4 MDF, 1/8 aluminum angle for bearing races and various other odds and ends. I learned a lot about how not to build a CNC router. I found Openbuilds.com and decided to build a C-Beam for my first build. The long term idea is to use this machine to build custom plates for and OX type machine and a 3d printer.
Build Author peter28 Views 865
i wanted to use both the ox and the C beam C beam for the gantry because its stronger i also made the gantry 20 mm higher so i can cut thinker material i will maybe later go to rack& pinion on the 1500 mm Y axes also instead of the V wheels i will maybe go to hiwin in the furture
Build Author Joe Garritano Views 2435
Using criticall OpenBuilds components to upgrade the rigidity and reliability of an X-Carve 1000mm build.
Build Author anigeek65 Views 9318
OX Super "C" - Cpmpleted 11/02/16
This CNC utilizes the C-BEAM extruded aluminum for the "X", "Y", and "Z" axis. The gantry will move similar to the OX along with the "Z" except I am incorporating the C-BEAM instead of the 20x60 V-RAIL. To make the system as strong as possible I am using two C-BEAM rails back to back. The "Y" axis will encompass two sets of roller on both side of the C-BEAM extruded rails for added strength. All of the plates for this were created using the C-BEAM machine I completed several month ago.
Build Author Metalguru Views 4775
Big Ox Heavy Duty
A Heavy Duty version of the standard Big Ox build.
Build Author FatGut Views 664
MY experience as a first time introduction to the CNC world!
Build Author James Hayes Views 1875
Pure Cbeam 900x1000
This is a pure cbeam build to maximize envelope and rigidity. All the parts used are available from open builds.
Build Author Jen Views 2494
My first OX build
This is the story of my experience building a 1000 x 750mm OOZNest OX CNC router
Build Author Brian Slee Views 16308
Ultimo is the ultimate multi tool for the person who's serious about prototyping new ideas. A Delta Robot frame supports 3d printing up to 450mm in diameter, a powerful CNC Mill, and 50 amp plasma cutter for processing steel plate. And that's just a start.....wait till you see some of the other attachments we are currently working on incorporating.
Build Author Mark Carew Views 44727
Phlatprinter foam cutting CNC machines are awesome space saving mills that use a rotary axis as a sheet feed.
Build Author Silverrabbit2 Views 2011
Ooznest OX, Workbench, & Folding Table
An OX based unit with innovation surrounding it -- 9 drawers, workbench, folding CNC table, & portability.
Build Author Maxime Favre Views 2954
SmoothiebrainZ CBeam Machine
Modded Plate maker with: Smoothiebrainz board and DQ542MA SN04 Endstops Modded Z axis Aluminium build plate and renforced Y axis Dust shoe
Build Author Dave420 Views 3963
OpenBuilds C-beam 15mm belt on 1500mm C-Beam.
OpenBuilds C-beam 15mm belt on 1500mm C-Beam.
Build Author pinoaffe Views 1042
This is a stool, designed in 18mm wood for a cnc router, it's easily scaleable to different wood-thicknesses, in 18mm wood it takes up 1200*1200mm. It can be assembled without screws, nails or glue and can therefore also be easily disassembled.
Build Author semperfikurt Views 10178
Beefed-up and customized OX build
My Machine is based on the OX CNC designed by Mark Carew as well as the ooznest kit, and it incorporates a bunch of my own details and revisions to increase performance and robustness. It has become way more beastly than I originally planned!
Build Author Bob K Views 4169
Dream to practical
This is my journey from a dream machine to a practical (for me) machine. This is a Cartesian style frame that can change tool heads quickly. The first version will have milling and 3D printing tool heads. Later on I'll add a drag knife tool head.
Build Author Julius Views 7856
OX Balls - 1605 Ballscrew Powered 1000mmx1000mmm OX derivative
1000x1000mm Ballscrew driven OX Derivative. Dewalt 611 spindle and TB6600 Drivers.
Build Author john A Views 1015
Cartesian CNC router
This project has been a steep learning curve in an unfamiliar area for me. It has been a very rewarding experience and has opened up so many more possibilities to pursue in the future.
Build Author Hackscribble Views 13098
1000mm x 750mm OX with some planned enhancements. My first venture into CNC.
Build Author James Gao Views 11297
An OX-inspired mini desktop mill. Designed in OpenSCAD, these parts are fully parametric and can be customized to your liking.
Build Author crnrstndes Views 1660
My first CNC - The C-Beam Basic
I am a newbie and this is my first build. After hours and hours of research I decided on the C-Beam. I will be changing one or two things but I will basically be building this as per Mark's video.
Build Author P. ry Views 7019
Nox 1500mm x 1500mm C-Beam
C-Beam build using a double C-Beam for the X axis. 1500mm x 1500mm
Build Author AK-Creation Views 1694
Reference sensor for CNC Tools
For the x and y Axis you set the zero point with a limit switch, but how can you get the zero position for the z Axis? You have different thickness of material to mill and when you change the tool, you have also a other z Axis positon. With the Sensor, you can define the zero position of the piece automaticly.
Build Author Joe 90 Views 2763
Schematix OX metal build
OX metal build from an noob
Build Author sw3Dp Views 6672
stranger than fiction OX
OX hybrid all CAD open sourced non-commercial ip; .dwg, .dxf,.3dm, .iam, .ipt files jamming their pie
Build Author ymilord Views 10094
C-Beam Rigid - 'The Hog'
C-Beam Machine baseline build. DW618 Spindle. SuperPID. Gcode Controlled Mist Coolant. Rigid Work Surface. NEMA 23 (425oz-in) Leadshine 4 Axis Stepper Driver. LinuxCNC (MachineKit) Tool Touch Off Probe.
Build Author Krishnakumar Views 1772
Hobby OX CNC
This "hobby OX" CNC is built for multiple purposes such as cutting and engraving various materials, laser etching and cutting, etc... Its a great platform for hobby enthusiasts like me where this machine can be used for so many different purposes effectively and efficiently!
Build Author kev20009 Views 1512
MY NEW CNC
This build is not based on the ox, but got my ideas and inspiration from my first build,
Build Author kev20009 Views 4828
This Build Is Is Inspired By OOZ Nest CNC, But With Some Changes,
Build Author ymilord Views 4139
Kyoujin Mk1 (C-Beam /w Rack & Pinion)
C-Beam based CNC with Rack & Pinion (for the X Axis) and lead screws (for the Y Axis)
Build Author John Mueller Views 8313
Small Mill type CNC machine, using C-Beams and V-Slot rail, bundle packs as a starter point. I needed a smallish desktop machine to fit a pretty narrow use case for my business, but the machine itself has larger applications to the OB community. Currently I will run the Dewalt 611 router on the Z axis, but have plans to add in a brushless RC style motor. So this design does have room to go either way easily.
Build Author slm222 Views 903
Cheap linear rail set up for z-axis
A easy to do cheap upgrade for the z axis
Build Author JordanMoss Views 2261
My CNC Build
Initial design for my CNC mill\router based around C beams
Build Author Ronald van Arkel Views 22244
Routy GT2 290 BSX CNC Router, Low Cost and Good!
The Routy GT2 300 BSX CNC Router is a Low Cost CNC build. It performs the same as the larger Routy's from OpenBuilds but doesn't break the bank!
Build Author nate campbell Views 2091
CrOX Carbon Reinforced OX
Modified OX with carbon fiber reinforced X and Z axes. 1500mm Y, 1000mm X and 120mm Z clearence
Build Author Metalguru Views 1921
Custom black and red Big Ox
Build Author David the swarfer Views 6915
The Nguni - an OX variant
A modified OX with more X clearance, MDF plates, vacuum table
Build Author Rakmup Views 17437
CNC Router Lathe
Steel square tube frame with dual feed gantry and indexing lathe section. Will have 36" x 30" x 6" travel.
Build Author Dexter Oddwick Views 1549
Black Rabbit 1500
This is a router that I designed that is loosely based on the Openbuilds Ox, but designed to be heavy duty, rigid, and yet quick and agile.
Build Author inhan Views 10959
openbuilds rovo c-beam (700*1000)(1000*1000)한국오픈빌드
Open the build will create open and sharing. 오픈빌드는 만들고 오픈하고 공유합니다.
Build Author Erick Sauvé Views 2352
My first build: a other OX CNC
I love to build things. I decided to build a CNC machine to help me build more things! I had a lot of fun and I learn a lot of thing in the process of building this machine. p.s. my primary language is french not english. Forgive me if I made some mistake.
Build Author Nguyen Thanh Tuan Views 1016
CNC machine 700x1200mm
I love to build things. I want a large cnc machine can do with little money. use Aduino .
Build Author Moag Views 8115
Moag's CNC Mill
A design in progress, to 3D carve two-part Aluminium injection moulds for Soft Plastic Lures and Lead Jigs, so I can prototype some of the concepts rattling around in my head. All Openbuilds parts where possible, 1000x500mm footprint, 0.8kw Water-cooled Spindle?, High Torque Stepper?,Smoothieboard?, I still have no idea. As a newbie to the CNC world, any wisdom would be welcome to take this from just a idea into reality so I can start playing with all this awesome stuff. Thanks in advance
Build Author Brandoneous Views 718
I'm Brandoneous; hence, the BrandoneOuX, a cartesian CNC build. Large format (1000mm x 1000mm) but beefed-up to solidly augment the ability to cut Aluminum in addition to wood and other solid materials. As I am currently living in a rented apartment for an out-of-state job, my secondary challenge is to build a sound dampening enclosure that will function as a torsion box base, a sound dampening enclosure, and a dust containment system. Easy, right? Well, we'll see... Join my journey
Build Author Richard Gouge Views 3101
C-Beam Big Mouth
My first build was with the basic C-Beam Build. I soon found the z clearance a little constricting So I added 2 500 mm actuators to support the x axis rail . I also left off the front and back y axis support rails for easy cleaning. I mounted the base of the machine to 1/2" mdf with 10/32 screws and blind nuts.
Build Author evil2002usna Views 3859
Cheap Ballscrew Ox CNC Router.
Build Author dcorb Views 10401
Steel Frame CNC Router
A scratch built steel frame CNC Router.
Build Author Tweakie Views 12134
Tool position setting Part II.
The method used for tool position setting is a matter of personal choice but this is what I do.
Build Author Colin Tree Views 3030
The first criteria was portability, the second was cutting out a sheet of ply, the third was the ability to shape a foam surfboard blank, but the main criteria was a small budget.
Build Author Headlodius Views 1361
My 1st C-Beam Router
Pretty happy with the build, had some difficulty with the software loading up the settings due to me using the wrong com.
Build Author UltiBots Views 8389
UltiBots CB3030 CNC Router
The UltiBots CB3030 CNC uses C-Beam, V-Slot and an extruded aluminum T-Slot work table. This allows 6mm T-Nuts, step clamps and blocks to secure materials to the work surface. The all metal design makes the use of a mister possible.
Build Author Paruk Views 13085
OX 1500 x 1000 mm
Build Author alex_b Views 4521
TACIT RONIN CNC - Flood Coolant Enabled C-Beam
The TACIT RONIN CNC is a fully enclosed C-Beam platform intended for flood coolant cutting of Carbon Fiber and G10 composites.
Build Author Matt Nelson Views 4690
I'm building an OX CNC router. It will be the larger size of 750x 1000mm. This should give me a working area of about 22"x30".
Build Author Neil Rosenberg Views 54196
The Frog: CNC Router
Frog CNC Router. Inspired by OX and "Routy". 24"x36" active working area, approx. 3" usable Z motion.
Build Author Metalguru Views 2794
Metalguru's C-Beam 750
This is a C-Beam build, fairly heavy duty, and 750mm x 750mm. Should be a good, sturdy machine that's relatively easy to assemble.
Build Author Peter Oakes Views 14768
The Bull Dog, A RoverCNC OX based 1500mm x 1500mm CNC - Tutorial build
I have based this build on the OX build so I will not be going into too much detail of specefic assembly modules as they asre so well covered by Mark Carew already, but will go through the complete build on video. I will be addig additional tutorials on steppers and the other electronic parts as needed though as this project is sponsored by RS Components in the form of most of the Electronics and this is also the key focus of my YouTube channel www.youtube.com/c/thebreadboardca.