Select a Category
Build Author HPB Views 5233
A simple XY laser engraver/cutter
A simple low-cost XY plane laser engraver/cutter inspired by the Much 4 laser build, with minimal parts and assembly time. Uses standard off the shelf components in almost 90% of the build with the exception of the axes motor and wheel mounts which need to be 3D printed.
Build Author Ariel Yahni Views 4373
Modifying the K40 laser cuter stock gantry in favor of OpenBuilds superior and smoother movement. Also will provide me a better level control for easier beam alignment.
Build Author zaxes Views 3355
Laser engraving machine
Second better project, high durable mainframe, silent work, non vibration.
Build Author Anthony Bolgar Views 1457
Just a little light duty laser engraver.
Build Author skarab Views 36987
Much4 - LaserV printed version
By following the way of Robert Hummel, I drew a version of its exellent Laser V to use NEMA17 and easily printable parts.
Build Author AK-Creation Views 9754
Designer Jeans with a Laser
I install the third extension on my cnc router and ask me, what can I do with a laser? So I make some test and find out - >>It is possible to engrave jeans clothes<<. Create your own Designer Jeans with a Laser!
Build Author Cipta inovasi Views 1013
laser gantry use mini v end block my own design
i always make laser cutting machine, but when i see openbuilds, this can make more cheap gantry for make laser cutting.
Build Author Anthony Bolgar Views 4368
L'FOX - Large Format OX deriviative. Designed and built by Revision 13 Prototypes
This build is for a testing rig to use while testing out different controller boards for use with LaserWeb v3. It will also be used to test LaserWeb v3 as a CNC router/mill software in the near future. It is in the early stages, planning is complete, parts are ordered. Awaiting parts delivery to start build. Please not the BOM only covers parts from the OpenBuilds part store. I will be posting the other required items very shortly.
Build Author Metalguru Views 1933
Small Laser Engraver Concept
Low cost Laser Engraver build using all off-the-shelf components.
Build Author mytechno3d Views 14248
A low cost and easy to build laser cutter based on 2.8w laser diode .
Build Author MConner Views 2162
Fun and Functional Laser Build
A very fun and fulfilling build. I can't say enough about the whole Open Builds site and Open Source movement. I strongly believe this is the fastest and most creative way of getting ideas out of the mind, and onto the floor.
Build Author Dave420 Views 2536
10 x 5 ft plazma table build
Attaching V Slot or mutable V Slot end on end to a larger steel frame table.
Build Author mytechno3d Views 5559
Plasma cutting table
This is our plasma cutting table , based on the famous OX CNC . Can cut up to 15 mm ( steel , stainless , aluminium ) with a really good accuracy and at a really high speed .
Build Author snokid Views 1636
http://www.buildlog.net/sm_laser/drawings.html using this as a baseline.... Going to try and use all or most off the shelf parts.
Build Author Tim Butler Views 2383
CO2 laser cutter
A build which is based on a metal frame and aluminium plate which I salvaged from a skip. The frame is sized to hold 19" rack units so I'll build my control box into a 3U rack unit (also salvaged). The area available for the build is 700x1200mm. I'll sling a 60W CO2 tube under the base, the beam path will be initially upward into the enclosure.
Build Author inhan Views 10440
Openbuilds rovo laser mini(오픈빌드)
laser mini 20 * 40 OPENBUILDS base frame.(크기 412x455mm) laser mini 20*40 기본프레임입니다. 기존 여러부품을 사용한 제품보다 부품수를 줄이면서 최소한의 단가를 뽑을려고 디자인했습니다.. 기존대비 부품수 절반에 단가도 절반을 줄이면서 최적의성능을 내려합니다.
Build Author AK-Creation Views 1754
Update for my 3D Printer - Big Size
I like combo machines, so I upgrade my 3D Printer with a Laser. It is a double head combination. The Laser is easy removable.
Build Author Metalguru Views 2000
Dragon Portable CNC Plasma Cutter
A small portable CNC Plasma Cutter with some unique features
Build Author Yoshiya Arii Views 16032
V-Slot Laser cutter and engraver
The Smart Laser Mini is an open source such as use Raspberry pi. Easy to assemble type of desktop laser cutter and engraver. Also we used V-slot
Build Author Jurgen Views 2503
laser add-on for C-Beam machine
3.8 W laser add-on for C-Beam machine. Can easily be swapped with the router.
Build Author Dave420 Views 3081
Powder coated multi CNC Z Axis plasma adapter with Prox.
Powder coated multi CNC Z Axis plasma adapter with Proximity sensor. . It can also hold a 80mm Router head/Spindle as seen in my router build.
Build Author openhardwarecoza Views 30065
openBuilds FreeBURN-1 V-slot CO2 Laser (60-100w)
DIY Lasercutter: Budget orientated, medium sized (60-100w), safety first, based on Lasersaur software toolchain
Build Author Max_Sijbers_Mechatr... Views 2680
In the expo projects during the second year of engineering students. the project group who made this rapport made a laser cutter for the students of Fontys Hogeschool Engineering to use this machine for creating parts for their projects. The goal of Project Laser Cutter is to build a laser cutter, which is safe and can be used within the school. Also it has to be able to cut through 10 millimetres thick acrylic material or 10 millimetres thick plywood. This project will follow the V-model. This
Build Author Hytech2k Views 16189
Triple Shot R-P-M Area 51 CNC Parts
We wanted to create a rapid prototyping machine with excellent 3D printing, laser cutting and engraving, and light CNC router work capabilities.
Build Author blindflight Views 3402
This is a mount I wanted to build for a laser project using OpenBuilds part router mount.
Build Author DistortedDesigns Views 18306
Project Death Star - DistortedDesigns Laser Engraver
2 watt Laser Engraver, Simple, Fairly Low Cost, and Portable
Build Author openhardwarecoza Views 17532
openBuilds FreeBURN-2-Mini V-slot CO2 Laser (40-50w)
A new mini version of the http://openbuilds.com/builds/openbuilds-freeburn-1-v-slot-co2-laser-60-100w.1001/ FreeBurn CO2 Lasercutter
Build Author Andrew Hague Views 4330
Laseroko Laser Engraver Build
After expanding a Shapeoko 2 with the rails and motors left over, make yourself a laser engraver.
Build Author Shannon Jardine Views 3776
Large Laser cut table build
Large 6 x 10 foot laser table build. New to building CNC
Build Author Tweakie Views 33414
Here it is my intention to show what was involved in adding a CO2 laser to my existing CNC machine.
Build Author openhardwarecoza Views 18542
Plasma cutter - 608 on steel tube version
CNC Plasma cutter: 608ZZ on steel square tube linear rollers Welded frame HDT2-15 Belt Drive Tradeweld Cut-40 Plasma cutter with converted hand torch Virtual Torch Height Control through inductive probing - open source electronics project
Build Author Robert Hummel Views 97192
With such great success/attention my laser got, I ended up with a good friend that would like to dabble in stencil art and so I have decided to share my build with him and you here :) I will be using all the same electronics as in my previous build except the driver boards I will be using are the famous reprap 4988's they are more easy to come by and cost less. I will also be using open builds mini v wheels/v groove extrusion just so I can get a feel for their versatile products
Build Author cureac Views 10388
Homemade plasma cnc
Build Author Sjors Views 4096
Laser cutter project by students
This build is made by students from Fontys Hogescholen Eindhoven, department Engineering. Every quarter a new group continues the work of the previous group. We have been working on the project since september 2015, and as it is a work in progress, a lot will be added later. The first months have mainly been about designing and building an XY-table on which later all the electronic components will be added and the laser.
Build Author michel pet Views 3496
core xy smoothie
i had som left over parts and i dit like to test the corexy control so this is wat i came up with. sorry bad englich.
Build Author zelos Views 7277
ZelosLaser Engraver/Cutter 2.0 : Sturdy & Versatile
Zelos Laser Cutter Version 2.0 GRBL Shield with Nema 17 motors. 2 Watt laser for cutting and fine grayscale pictures built very sturdy and modular
Build Author Mohammed Iskandarani Views 11132
CO2 60 -130 WATT LASER ENGRAVING/CUTTING CNC WITH DSP AWC608 CONTROLLER
LASER ENGRAVING DIY 60 WATT
Build Author brw_racing Views 5467
3d printed 2.5' X 2.5' cnc plasma cutting machine
Improvements to a cnc plasma cutter i designed a while back. Not that it really needs it to work but i think it could be an improvement.